winco TDAC-8W Paper Towel Dispenser

MOUNTING THE DISPENSER
- Open the unit by pressing the button located at the top-rear of the dispenser (Fig.1 ).
- Place the dispenser on desired wall location.
- Mark and install wall anchors.
- Mount using screws and washers.

LOCKING THE UNIT (OPTIONAL)
- Close the dispenser.
- Insert locking key (included) into the button located at the top-rear of the dispenser (Fig.2).
- Turn key to lock unit.

FILLING THE DISPENSER
NOTE: PLEASE CHECK YOUR PAPER TO MAKE SURE IT IS IN THE CORRECT DIRECTION
CORRECT | INCORRECT |
![]() | ![]() |
- Open the unit by pressing the button located at the top-rear of the dispenser (Fig.3).
NOTE: the key will be required if unit was locked with the key (Fig. 2). - Load the paper roll onto the spools and feed the paper through the roller by turning knob on side toward the back (Fig.4).
- Close the unit.

Customer Support
1-888-946-2682 I
[email protected]
www.wincous.com





















