Razor W15128785133 Rambler 16 Headlight Holder Instruction Manual

Razor W15128785133 Rambler 16 Headlight Holder

Required Tools: (Not included)

• 3 mm Allen wrench
• 8 mm wrench
• Phillips screwdriver

WARNING

CAUTION: To avoid potential shock or other injury, turn power switch OFF and disconnect charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.

Step 1

Using a 3 mm Allen wrench and a 8 mm wrench, loosen and remove the bolt and lock nut at the back of the headlamp.

Step 2

Using a Phillips screwdriver, remove the two (2) screws that hold the headlamp holder onto the front fork.

Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday – Friday 8:00am – 5:00pm Pacific Time

Step 3

Reverse the steps.
ATTENTION: Charge battery 12 hours before using.

References

• Razor | Scooters and Ride-ons for the whole family