Red Shark Bikes Adventure Water Bike Instruction Manual (+ PDF)

Contents hide

2 Product Information: Bike Surf (Personal Water Craft)

Adventure Water Bike

Product Information: Bike Surf (Personal Water Craft)

The Bike Surf is a personal watercraft designed for recreational
purposes. It comes in three models – Adventure, Fitness, and Enjoy.
The product is shipped in two boxes, and each model includes
different parts and elements. It is important to read the user
manual before using the product to ensure correct usage and avoid
personal injury or physical damage. The manufacturer assumes no
responsibility for any damage caused by mishandling that is beyond
normal usage defined in these manuals of this water bike.

Parts & Elements:

ENJOY Model: FRAME B, PROPELLER C, PROPELLER
B, Seat post CLAM, SADDLE, RUDDER, Frame CLAM, SADDLE cover,
PEDALS: LEFT & RIGHT, Seat POST, PEDALS: CRANK, BOTTLE cage,
FRAME A, REPAIR kit, MULTI-TOOL KIT, AIR PUMP, GRIPS, Rudder POST,
HANDLE bar, STEM, BOTTLE, TRANSMISSION, FIN, BOARD BELT, BOARD, and
Travel bag STRAPS.
FITNESS Model: FRAME B, RUDDER, PROPELLER D,
PROPELLER C, PROPELLER A, PROPELLER B, Seat post CLAM, Frame CLAM,
PEDALS: LEFT & RIGHT, PEDALS: CRANK, BOTTLE cage, FRAME A,
MULTI-TOOL KIT, REPAIR kit, Frame NET, SADDLE, Seat POST, AIR PUMP,
GRIPS, Rudder POST, HANDLE bar, STEM, BOTTLE, TRANSMISSION, FIN,
BOARD BELT, BOARD, Water PROOF BAG, and Travel bag STRAPS.
ADVENTURE Model: Top frame BAG, HANDLER BAG,
PROPELLER B, PROPELLER A, BOTTLE cage, FRAME B, RUDDER, Seat post
CLAM, Frame CLAM, SADDLE, PEDALS & CRANKS: LEFT & RIGHT,
SADDLE cover, Seat POST, NET rear board, AIR PUMP, REPAIR kit,
Phone holder, FRAME A, GRIPS, Rudder POST, HANDLE bar, MULTI-TOOL
KIT, STEM, BOTTLE, TRANSMISSION, FIN, and Water PROOF BAG.

Assembly Instructions:

Open the two boxes (from the top side) and carefully remove all
parts from the box.
Remove all plastic bags and protections carefully. Note that
plastic bags can be dangerous and should be kept away from children
and pets.
Read the packing list (outside the box) and check if all the
elements are included in the package.
Follow the assembly instructions specific to your model
(ADVENTURE, FITNESS or ENJOY) as provided in the user manual to
assemble the product.
After assembly, store the user manual in a safe place for
future reference.

View Fullscreen

BIKE SURF
(Personal Water Craft)
UNBOXING & ASSEMBLY instructions
GB: WARNING If you don’t understand something please contact to Red Shark bikes.
ES: IMPORTANTE Si no entiende algo, por favor contacte con Red Shark Bikes. F: IMPORTANT Si vous ne comprenez pas quelque chose, veuillez contacter Red Shark Bikes.
DE: ACHTUNG Wenn Sie etwas nicht verstehen, wenden Sie sich bitte an Red Shark Bikes.
I: IMPORTANTE se non capisci qualcosa, contatta Red Shark Bikes. P: IMPORTANTE Se você não entender alguma coisa, entre em contato com a Red Shark Bikes.
RUS: – , , Red Shark Bikes.
NL: BELANGRIJK als u iets niet begrijpt, neem dan contact op met Red Shark Bikes
S: VIKTIGT Om du inte förstår något, vänligen kontakta Red Shark Bikes.
JP: Red Shark Bikes
Before anything, read user’s manuals of this water bike to ensure correct usage through understanding. After reading, store them in a safe place for future
reference. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this water bike
IF YOU DO NOT AGREE FULLY TO ALL OF THESE PROVISIONS, YOU SHOULD NOT USE RED SHARK BIKES PRODUCTS.

ASSEMBLY INSTRUCTIONS

ADVENTURE model FITNESS model

ENJOY model

PARTS & elements

ENJOY model

PARTS & elements
FITNESS model

PARTS & elements
ADVENTURE model

ASSEMBLY INSTRUCTIONS 1. Please open the 2 boxes (from top side) and carefully remove all parts from the box.
2. Remove all plastic bags and protections carefully.
WARNING: Plastic bags can be dangerous, to avoid danger of suffocation, keep all the bags away from all babies, children, and house pets. Do not use in cribs, beds, carriages or playpens. Tear up bag before throwing away.
3. Read the Packing List (outside the box)
and check if there are all the elements

PARTS & elements

ENJOY model

1. FRAME B 15. Frame CLAM
18. PROPELLER C
18. PROPELLER B

5. Seat post CLAM

11. SADDLE

13. RUDDER

15. Frame CLAM

33. SADDLE cover

16. PEDALS: LEFT & RIGHT

12. Seat POST

16. PEDALS: CRANK

0. PACKING list (outside the box)

3. BOTTLE cage

1. FRAME A 22. REPAIR kit 20. MULTI-TOOL KIT

21. AIR PUMP

9. GRIPS
14. Rudder POST 8. HANDLE bar 10. STEM

2. BOTTLE 1. FRAME C
6. TRANSMISSION

3. FIN

TRAVEL bag
7. BOARD BELT 7. BOARD

Travel bag STRAPS

PARTS & elements
FITNESS model

1. FRAME B 13. RUDDER
15. Frame CLAM
18. PROPELLER D 18. PROPELLER C 18. PROPELLER A 18. PROPELLER B

5. Seat post CLAM

15. Frame CLAM

16. PEDALS:

16. PEDALS: LEFT &

CRANK

RIGHT

3. BOTTLE cage 1. FRAME A

20. MULTI-TOOL KIT 22. REPAIR kit 9. Frame NET

11. SADDLE

12. Seat POST

0. PACKING list (outside the box) 21. AIR PUMP

9. GRIPS

14. Rudder POST
8. HANDLE bar 10. STEM

9. GRIPS

2. BOTTLE 1. FRAME C
6. TRANSMISSION

3. FIN

7. BOARD

Water PROOF BAG Travel bag STRAPS TRAVEL bag
7. BOARD BELT

PARTS & elements
ADVENTURE model

Top frame BAG 15. Frame CLAM
HANDLER BAG
18. PROPELLER B 18. PROPELLER A
3. BOTTLE cage

1. FRAME B 13. RUDDER 5. Seat post CLAM

15. Frame CLAM 11. SADDLE

Rear saddle BAG

16. PEDALS & CRANKS left & right

33. SADDLE cover 12. Seat POST

0. PACKING list (outside the box)

NET rear board

Water PROOF BAG

21. AIR PUMP

Water PROOF BAG

22. REPAIR kit 35. Phone holder 1. FRAME A

9. GRIPS

14. Rudder POST

8. HANDLE bar

20. MULTI-TOOL KIT

10. STEM

2. BOTTLE 6. TRANSMISSION

1. FRAME C

3. FIN

TRAVEL bag
7. BOARD BELT 7. BOARD

Travel bag STRAPS

ASSEMBLY INSTRUCTIONS
4. BOARD assembly
4.1. Extend the board

ASSEMBLY INSTRUCTIONS
4. BOARD assembly (Puff up /step 1 from 2)
4.2. Use the AIR PUMP to have only a LITTLE PRESSURE to get the basic shape.

Unscrew the cap.

Check the position of the Insert the air

valve spout

pump

Press 1 time or 2 times

Puff up the air to 1 psi

Remove the air pump

B. Board HOLE (rear)

A. Board Rudder HOLE (front)

Puff Up to 1 psi (approx.)

KEEP ATTENTION: The A & B Holes surface: must be completely clean from dust, sand and other dirty elements. If not it could damage on the board skin.
If you find air leakage on the valve, use the black tool (included on the repair kit tools) to tight or to disassemble the valve and check if is dirty and you can clean it .

ASSEMBLY INSTRUCTIONS
5. FRAME assembly
C
B

5.1 CHOSE the frame piece “A”:
A

ASSEMBLY INSTRUCTIONS

5. FRAME assembly

In the FRONT HOLE

Board with soft air pressure (From 0,01 to 0,5 psi)

KEEP ATTENTION: The A & B Holes surface, must be completely clean from dust, sand and other dirty elements. If not it could generate damages on the board skin. Please clean always before.
AVOID THE INTERFERENCES from the rudder and propeller with the board surface (holes A and B) if not it could generate damages on the board.
Suggestion: You can use a cloth rag to cover the rudder.

5.1 INSERT the frame “A” in the front hole with a little air pressure in the board

RECOMENDATION: Please us an small STOOL (not included).

Board

ASSEMBLY INSTRUCTIONS
6. HANDLEBAR assembly
6.1 Insert the handlebar in the STEM
TIGHT the 4 screws:
TORQUE SPECIFICATIONS
6 Newtons

ASSEMBLY INSTRUCTIONS
7. RUDDER assembly
7.1 Insert the rudder BAR in to the frame TOP hole
BOTTOM hole

5.2. Pull the ruder post up to the screw

ASSEMBLY INSTRUCTIONS
7. RUDDER assembly
7.2 Insert the rudder post to the STEM

7.3. Line up the handle bar with the rudder.

Handle Bar Stem

ALIGNMENT WITH THE RUDDER bar W ith the white mark in the center of the stem.

7.4 Tight the 2 screws
TORQUE SPECIFICATIONS
6 Newtons

ASSEMBLY INSTRUCTIONS

7. RUDDER assembly
RUDDER FUNCTION

7.5 Unscrew wing nut

“T”(transpor)
1
RUN

7.6 Chose the position POSITIONS: T: transport · I: level1 · II: Level 2 · III: Level 3
7.7 Screw wing nut

TIGHT the wing nut:
TORQUE SPECIFICATIONS
3 Newtons

“T” for transport
Level I to GO

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
C A
B
8.1 CHOSE the frame piece “B”:

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.2 TRANSMISION assembly:
8.3Untight the 3 bolts

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.3 Transmission LEVEL assembly:

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.4 PLEAE CHECK the transmission DIRECTION assembly:

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.5 Transmission ALING:

Align with the central marked line

From top side

From TOP side

From BOTTOM side

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.6 Transmission screws TIGHTEN:
Tighten all the 3 screws

TIGHT the 3 bolts:
TORQUE SPECIFICATIONS
6 Newtons

3. Bolt & Locknut
Please use a tool 13 (NOT INCLUDED)

ASSEMBLY INSTRUCTIONS
8. FRAME “B” assembly
8.7 INSERT the frame in the REAR HOLE with a little air pressure in the board
In the REAR HOLE
Board with soft air pressure (From 1 to 1,2 psi)

RECOMENDATION: Please us an small STOOL (not included).

Board

ASSEMBLY INSTRUCTIONS
9. FRAME “C” assembly

9.1 CHOSE the frame piece “C”:
C

ASSEMBLY INSTRUCTIONS
9. FRAME “C” assembly
9.2 INSERT the frame “C” in to the frame “A” & “B”.

ASSEMBLY INSTRUCTIONS
9. FRAME “C” REAR unión assembly
9.3 TIGHT the screw through tre two frames with the clamp using the LONGER Allen key

ASSEMBLY INSTRUCTIONS
9. FRAME assembly (front union)
IMPORTANT: TIGHT with the FULL POWER

TIGHT the Bolt:
TORQUE SPECIFICATIONS
8,5 Newtons

ASSEMBLY INSTRUCTIONS 10. FRAME & BOARD (position)
10.1 Confirm the frame position: Must be in a vertical position (90º towards the board)

FRONT view

SIDE view

90º

ASSEMBLY INSTRUCTIONS 10. FRAME & BOARD
10.1 PUFF UP the FINAL AIR PRESSURE
From 13 to15 PSI
10.2 screw the cap onto the valve

ASSEMBLY INSTRUCTIONS
11. SADDLE assembly
11.1 Untight the bolt, adjust the seat to your position and tight the bolt.

11.2 SADDLE position adjustment

TORQUE SPECIFICATIONS: 7 Newtons

ASSEMBLY INSTRUCTIONS
11. SADDLE assembly in the frame C
11.3 Open and adjust seat Post CLAMP position

11.4 Check your height

11.5 TIGHT the post clamp

11.6 SADDLE position adjustment

TORQUE SPECIFICATIONS SEAT POST: · 6 Newtons

Untight the bolt, adjust the seat to your position and tight the bolt.
TORQUE SPECIFICATIONS: 7 Newtons

Adjustment recom m endations

ASSEMBLY INSTRUCTIONS
12. PEDALS assembly
12.1 Remove Bold and washer

12.2 Find the pedals SIDE

RIGTH crank mark

LEFT crank mark

L
LEFT
side

9.3 Screw the bold with the washer in to the transmisión axel

RIGTH
side
R
front direction

TORQUE
SPECIFICATIONS
10 Newtons

a. Insert the PEDAL crank b. Insert the WASHER

b. Tight the 2 BOLDS

ASSEMBLY INSTRUCTIONS
13. PROPELLER assembly

13.1 Remove carefully the plastic protection

13.2. Remove the bold and washer

13.3 Needle placement
A A

13.4 PROPELLER placement

13.5 Tight the bolt and the washer
TORQUE SPECIFICATIONS 4 Newtons

ASSEMBLY INSTRUCTIONS

14. FIN assembly

14.1 Insert the fin in the board (bottom rear) slot until the end. Slide the fin onto the bottom side of the board until the end and cross the pin until you hear a click.

14.2 and cross the pin on the hole fin until you hear a click.

Click

ASSEMBLY INSTRUCTIONS 15. TRANSPORT & MANIPULATION
NOTE: TROLLEY is an extra equipment
Trolley BELT

ASSEMBLY INSTRUCTIONS 15. TRANSPORT & MANIPULATION

15.1. REMOVE the FIN

15.2. PROPELLER: in HORIZONTAL position

15.3. RUDDER: in “T” (HORIZONTAL position)

ALWAYS keep the PROPELLER and the RUDDER in HORIZONTAL POSITION
until you reach the minimum W ATER Dept of 60 cm

ASSEMBLY INSTRUCTIONS 15. TRANSPORT OPTIONS

Most recommended

MOST recommended

ASSEMBLY INSTRUCTIONS 16. BEFORE RIDING check

MINIMUM DEPTH:
0,6 m

16.1. FIN position

16.2. RUDDER in VERTICAL position

TO GET ON INSTRUCTIONS
17. HOW TO GET ON from water:
17.1 ALWAYS From REAR

PRACTICE THIS ACTIONS until you really know, before start

17.2 SEAT on top of the board
17.3 Move in to the center and go!

TO GET ON INSTRUCTIONS
17. HOW TO GET ON from a wharf, boat or similar:
1. Always parallel & from the side
Grab the handlebar and do not transfer the weight of your body (from the 2º foot on firm ground) until you have the 1st foot in the center of the board.
1º 2º

PRACTICE THIS ACTION is dangerous, some additional support from the wharf it will help you to know how to do it.
PRACTICE THIS ACTION with helmet, column protector and wear
LIFE JACKET

17.2 Balance centered and relax

17.3 Pedal straight smoothly but decide until you find your body rhythm relaxed. When you have to turn, don’t stop pedaling and don’t do it smoothly

For better balance, Keep YOUR BODY to the board center

IMPORTANT NOTE: Do it on a calm water with no wind. First moments are the most stressful ones, so you should ride smooth. As soon as you feel stable please turn (left or right) very smoothly.

NOTES
FIRST TIME: Do it on a calm water with no wind and with the comfort propeller. First moments are the most stressful ones, so you should ride smooth and constantly in a straight line. As soon as you feel stable please turn (left or right) very smoothly but with a constant pedalling. You may have a feeling of having a very smooth roll, this is normal, but it is misleading, your will see, after 30 minutes of pedalling fairly at a medium rate, the strength on your legs.” Using a Red Shark Bikes products on the water can be dangerous and involves certain risks which often cannot be predicted or avoided. Those risks include, but are not limited to, personal injury or death, property damage, which may result from, loss of control, collisions with other users or watercraft, swimmers, and natural and man-made objects and/or animals/plants. By choosing to use a Red Shark Bikes product, you assume these risks and thereby need to know and practice water safety rules, responsible motoring, and proper use and maintenance of your Red Shark Bikes product(s) to reduce these risks. Since it is impossible to anticipate every situation or condition which can occur while some elements under in water, Red Shark Bikes can make no representation or warranty about the use and safety of Red Shark Bikes products under all conditions.
REGISTERING YOUR Personal Water Craft as a vessel: Please the rules and in certain municipalities, states or countries, it is required that you register your water bikes, kayaks, SUPs, canoes, scooter surfs motorized, with your local licensing body. Please be sure to take the necessary steps to comply with local laws and regulations that apply to your water bike.

WARNINGS & PRECAUTIONS
PROHIBITION
PROIBIDO / PROHIBICIÓN / VERBOT. KIELTO / VERBOD / DIVIETI / INTERDICTION / ZAKAZ / TILTÁS / FÖRBUD.

WARNING
ATENÇÁO / ADVERTENCIA. ACHTUNG / VAROITUS / W AARSCHUWING / AVVERTENZA / ATTENTION / OSTRZEZENIE / FIGYELMEZTETÉS / VARNIG

DO NOT USE IN DO NOT USE IN DO NOT USE IN OFFSHORE W INDSELECTRIC STORMS OFFSHORE
CURRENTS

DO NOT USE IN DO NOT USE IN

SW IMMERS AREAS

WAVES or

CURRENTS AREAS

AIR: 13 -14 psi

NO PROTECTION DESIGN W ORKING

AGAINST

AIR PRESSURE

DROWNING

WEAR elements and clothes that cannot
be tangled

MANDATORY
OBRIGATÓRIO / OBLIGATOIRE / NUTZUNGSHINWEISE / PAKOLLINEN / VERPLICHT / OBBLIGATORIO / OBLIGATION / NORMA / KÖTELEZÖ / OBLIGATORISKT

110 kg

FIRST READ MANUAL INSTRUCTIONS

SW IMMERS ONLY

W EAR LIFE JACKEDTEVICE REQUIRES ONLY 1 PERSON BALANCING SKILLS

MINIMUM DEEP: 0,6m

MAXIMUM: 300m UNDER 18 years old

from the coast

MUST

Max load

BE ACCOMPANIED capacity110 kg

BY AN ADULT

This product is a Personal Water Craft and in France is under the “engins de plage (Division 240 – article 240-1.02)” category.

IMPORTANT:
Always wear an approved Personal Flotation Device NEVER use the Red Shark to go further than you can swim, on your own power Like any other device, there is a chance of product failure, always ensure that such failure will not put you in danger
Never use under the influence of drugs narcotic substances or alcohol Children and minors under 18 years old, must be used only under adult supervision. NEVER use the Red Shark near fishing threads, branches, seaweed, plastics, loose clothing or OTHER objects from getting into the propeller. Always rinse or run in clean fresh water after use Do not use harsh chemicals to clean any Red Shark products When cleaning the propeller area, make sure some one is not turning the pedals Do not keep Red Shark products under direct sunlight or in a parked vehicle for extended period and always store from 10ºC to below 22°C It is forbidden to use the water bicycle to people who can not swim. Never wear clothing that may become entangled with any protruding element of the bicycle, if it overturns and stays stuck under the water, you can drown. During the use, no one should touch, the propeller and the rudder (can cause injuries). NEVER use the Red Shark if you may feel dizzy or lose consciousness. Avoid large tides or boat trails hitting your bike since this could tip your water bike. If you have no experience or you are not very skilled on swimming , never go alone and go to water areas that are not deeper than your neck. Do not use the water bicycle in places with water currents, waves or offshore wind. Check all the screws regularly before to depart. Before leaving, always check that the weather forecast is appropriate for this activity. Read the user manual in full.
IF YOU DO NOT AGREE FULLY TO ALL OF THESE PROVISIONS, YOU SHOULD NOT USE RED SHARK BIKES PRODUCTS.