Contents hide

3.1 Safety Instructions

3.2 Power Adapter Information

3.3 Additional Precautions

3.3.1 Documents / Resources

3.3.1.1 References

DM1411 Digital Audio Monitor

Product Information

The product is the VTech DM1411 Digital Audio Monitor.

The package includes the following:

1 baby unit
1 parent unit
Power adapter for the parent unit
Rechargeable battery pack for the parent unit
User’s manual

The product is designed to provide audio monitoring of a baby or
child. It allows parents or caregivers to listen to the sounds in
the baby’s room from another location within range.

The product features:

Wireless audio transmission
Range of up to three feet (0.9 meters)
Parent unit with rechargeable battery
Safety features to prevent strangulation hazards
Compatibility with other VTech products

Product Usage Instructions

Before using the VTech DM1411 Digital Audio Monitor, please read
and follow the important safety instructions provided in the user’s
manual.

Safety Instructions

Keep the cord out of reach of children. The cord should be at
least three feet away from the child at all times.
Do not use the product with an extension cord.
Do not remove the tag on the cord.
Adult setup is required for proper installation and
operation.
Do not install the soother at a height above 2 meters (6.5
feet).
Never place the soother inside the baby’s crib or playpen. Do
not cover the soother or parent unit with anything such as a towel
or blanket.
Install the baby monitor away from other electronic devices
that may cause interference, such as wireless routers, radios,
cellular telephones, intercoms, room monitors, televisions,
personal computers, kitchen appliances, and cordless
telephones.

Power Adapter Information

The power adapter for the parent unit has the following
specifications:

Output: 6V DC 400mA / 5V DC 600mA
Model: VT05UUS06040 / VT05EUS05060

Additional Precautions

Follow these precautions for safe use of the product:

Use and store the product at a temperature between 32°F and
104°F (0°C and 40°C).
Avoid exposing the product to extreme cold, heat, direct
sunlight, or close proximity to heating sources.
Batteries should not be exposed to excessive heat, such as
bright sunshine or fire.
If you or someone nearby uses an implanted cardiac pacemaker,
keep the product at a safe distance to avoid interference.
The product complies with electromagnetic field (EMF) standards
and is safe to use when handled properly according to the
instructions in the user’s manual.

For more information, support, and updates about VTech products,
visit the VTech website at www.vtechphones.com.

View Fullscreen

KTeaehuepwrstaceeyhoirmfswridotcovnÉhoelmrectaotedoiphnirhdigNoed’ssceenuduotetxetcttstainoztlheoiigdefcl.d’bsnerdsueeoéiiteMzctniaadolaattosqepencorlnelduaanthdleccsfeteloelmaorteooasottdsnrseifonnnntteenigdt.nuic.atmdurañovñeheheanseiotDeleroslstlra.tsisoceed.roteàqereen,eDennnExeufsaftostogeceentatuo.eetpann.eeindantbtt.oelmcsoNstiso.eaoeifóufLbtmrnluneuetsoieetereitrnmrrdaaameeoleidzápndbsetse.eplmol.aaebassrNaitallcoaccral.aaopnnNcoucroeseequite StranHgad’zuléatarrRtiidasoneqnsgultRireeaemsneggnoutldaeción KTeaheuepwrstaceeyhoirmfswridotcovnÉhoelmrectaotedoiphnirhdigNoe’dssceenuduottexetctsttainoztlheoiigdefcl.d’bsnerdsuoeeéiitezMctniaadolaattoseqpencorlnelduaanthldeccfseteloelmaroteooasottdsnresifonnnntteenigdtn.ui.catmdurañovñeheheanseioteDleroslstlra.tsisoceed.rtoeàqereen,eDennnExeufsfatostogeceentatuo.eeptann.eeindantbtt.oelmcsoNstsio.eaoeifóufLbtmrnluneuetsoieeetreitrnmrrdaaameeoleidzápdnbsetse.eplmol.aaebassrNaitallcoaccral.aaopnnNcoucroeseequite StranHgad’zuléatarrRtiidasoneqnsgultRrieeaemsneggnoutldaeción Strangulation Hazard Keep this cord out of reach of children. The cord needs to be at least three feet away from the child at all times. Do not use with an extension cord. Do not remove this tag. Risque d’étranglement Éloignez ce cordon des enfants. Le cordon doit se trouver à au moins trois pieds d’un enfant et ce, en tout temps. N’utilisez pas de rallonge. Ne retirez pas cette étiquette. Riesgo de estrangulación Mantenga este cable fuera de la alcance de los niños. Este cable debe estar por lo menos tres pies fuera de la alcance del niño en todo momento. No lo use con una extensión inalámbrica. No quite esta etiqueta. esta etiqueta. con una extensión inalámbrica. No quite del niño en todo momento. No lo use lo menos tres pies fuera de la alcance de los niños. Este cable debe estar por Mantenga este cable fuera de la alcance estrangulación Riesgo de cette étiquette. N’utilisez pas de rallonge. Ne retirez pas pieds d’un enfant et ce, en tout temps. cordon doit se trouver à au moins trois Éloignez ce cordon des enfants. Le d’étranglement Risque remove this tag. use with an extension cord. Do not away from the child at all times. Do not The cord needs to be at least three feet Keep this cord out of reach of children. Hazard Strangulation
Strangulation Hazard
Keep this cord out of reach of children. The cord needs to be at least three feet away from the child at all times. Do not use with an extension cord. Do not remove this tag.
Risque d’étranglement Éloignez ce cordon des enfants. Le cordon doit se trouver à au moins trois pieds d’un enfant et ce, en tout temps. N’utilisez pas de rallonge. Ne retirez pas cette étiquette.
Riesgo de estrangulación Mantenga este cable fuera de la alcance de los niños. Este cable debe estar por lo menos tres pies fuera de la alcance del niño en todo momento. No lo use con una extensión inalámbrica. No quite esta etiqueta.

Go to www.vtechphones.com to register your product for enhanced warranty support and the latest VTech product news.

DM1411
Digital Audio Monitor

User’s manual

For more support information
S m
DM1411

Congratulations
on purchasing your new VTech product. Before using this product, please read Important safety instructions. This manual has all the feature operations and troubleshooting necessary to install and operate your new VTech product. Please review this manual thoroughly to ensure proper installation and operation of this innovative and feature-rich VTech product. For support, shopping, and everything new at VTech, visit our website at www.vtechphones.com.

What’s in the box

UseU·s manual

Important safety instructions

The applied nameplate is located in the battery compartment of the baby and parent units. When using your equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Follow all warnings and instructions marked on the product. 2. Adult setup is required. 3. CAUTION: Do not install the soother at a height above 2
meters. 4. This product is not a substitute for adult supervision of the
infant. Supervising the infant is the parent’s or caregiver’s responsibility. This product could cease operating, and therefore you should not assume it will continue working properly for any given period of time. Further, this is not a medical device and should not be used as such. This product is intended to assist you in supervising your baby. 5. Do not use this product near water. For example, do not use it next to a bath tub, wash bowl, kitchen sink, laundry tub or swimming pool, or in a wet basement or shower. 6. CAUTION: Use only the batteries provided. There may be a risk of explosion if a wrong type of battery is used for the parent unit. The batteries cannot be subjected to high or low extreme temperature and low air pressure at high altitude during use, storage or transportation. Disposal of batteries into fire or a hot oven, or mechanically crushing or cutting or the batteries can result in an explosion. Leaving the batteries in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid of gas. Batteries subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas. Dispose of used battery according to the information in The RBRC seal. 6. Use only the adapters included with this product. Incorrect adapter polarity or voltage can seriously damage the product. 7. Use only adaptors and batteries listed below.
Power adapter information: Output: 6V DC 400mA /5V DC 600mA VTECH TELECOMMUNICATIONS LTD. Model: VT05UUS06040 / VT05EUS05060
Rechargeable battery information: 2.4V NiMH battery YIYANG CORUN BATTERY CO LTD. Model: NI-MHAAA400×2-FF/ NI-MHAAA750x2-FF 8. The power adapters are intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling, underthe-table or cabinet outlet. 9. For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible. 10. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. 11. Unplug the power cords before replacing batteries. 12. Do not cut off the power adapters to replace them with other plugs, as this causes a hazardous situation. 13. Do not allow anything to rest on the power cords. Do not install this product where the cords may be walked on or crimped. 14. This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply in your home, consult your dealer or local power company. 15. Do not overload wall outlets or use an extension cord. 16. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. 17. This product should not be placed in any area where proper ventilation is not provided. Slots and openings in the back or bottom of this product are provided for ventilation.

To protect them from overheating, these openings must not be blocked by placing the product on a soft surface such as a bed, sofa or rug. This product should never be placed near or over a radiator or heat register. 18. Never push objects of any kind into this product through the slots because they may touch dangerous voltage points or create a short circuit. Never spill liquid of any kind on the product. 19. To reduce the risk of electric shock, do not disassemble this product, but take it to an authorized service facility. Opening or removing parts of the product other than specified access doors may expose you to dangerous voltages or other risks. Incorrect reassembling can cause electric shock when the product is subsequently used. 20. You should test the sound reception every time you turn on the units or move one of the components. 21. Periodically examine all components for damage. 22. There is a very low risk of privacy loss when using certain electronic devices, such as baby monitors, cordless telephones, etc. To protect your privacy, make sure the product has never been used before purchase, reset the baby monitor periodically by powering off and then powering on the units, and power off the baby monitor if you will not use it for some time. 23. Children should be supervised to ensure that they do not play with the product. 24. The product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
SAVE THESE INSTRUCTIONS Cautions 1. Use and store the product at a temperature between 32oF
and 104oF. 2. Do not expose the product to extreme cold, heat or direct
sunlight. Do not put the product close to a heating source. 3. Batteries should not be exposed to excessive heat such as
bright sunshine or fire.

Warning–Strangulation Hazard–Children

have STRANGLED in cords. Keep this cord out

of the reach of children (more than 3 ft (0.9 m)

away). Do not remove this tag.

5. Never place the soother inside the baby’s crib or p laypen.

Never cover the soother or parent unit with anything such

as a towel or a blanket.

6. Other electronic products may cause interference with your

baby monitor. Try installing your baby monitor as far away

from these electronic devices as possible: wireless routers,

radios, cellular telephones, intercoms, room monitors,

televisions, personal computers, kitchen appliances and

cordless telephones.

Precautions for users of implanted cardiac pacemakers Cardiac pacemakers (applies only to digital cordless devices): Wireless Technology Research, LLC (WTR), an independent research entity, led a multidisciplinary evaluation of the interference between portable wireless devices and implanted cardiac pacemakers. Supported by the U.S. Food and Drug Administration, WTR recommends to physicians that:

Pacemaker patients · Should keep wireless devices at least six inches from the
pacemaker. · Should NOT place wireless devices directly over the
pacemaker, such as in a breast pocket, when it is turned ON. WTR’s evaluation did not identify any risk to bystanders with pacemakers from other persons using wireless devices.

Electromagnetic fields (EMF) This VTech product complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user’s manual, the product is safe to be used based on scientific evidence available today.

1 Connect the baby monitor
Install the parent unit battery
The parent unit runs on rechargeable battery or AC power. To continuously monitor your baby, make sure you use both battery and AC power at the same time. With the battery alone, the parent unit can cordlessly run for a short time only.
NOTES · Use only the battery supplied with this product. · If the parent unit will not be used for a long time, disconnect and remove the battery to prevent
possible leakage.
Replace the battery
To replace the battery, press down on the battery compartment cover and pull it out, then follow the steps above to install the battery.
Connect the baby monitor
NOTES · Use only the power adapters supplied with this product. · Make sure the baby monitor is not connected to a switch controlled electric outlet. · Connect the power adapters in a vertical or floor mount position only. The adapters’ prongs are not
designed to hold the weight of baby monitor, so do not connect them to any ceiling, under-the-table, or cabinet outlets. Otherwise, the adapters may not properly connect to the outlets. · Make sure the parent unit, the soother and the power adapter cords are out of reach of children.

Charge the battery
This portable soother has a built-in rechargeable battery for cordless usage. To charge the battery, connect the soother with the adaptor provided to a power source.
NOTES
· Make sure the soother and the adaptor are out of reach of children while charging.
· The soother battery is fully charged after · 12 hours of continuous charging.

Position the soother
CAUTIONS
· This is not a toy. Do not let your baby play with the product.
· Keep the soother out of the reach of your baby. Never place or attach the soother inside the baby’s crib or playpen.
You can use the tail on the soother or the additional strap provided to hang and attach the soother to almost anywhere, e.g. stroller handle, doorknob, diaper bag straps, etc.
Using the tail
Use the tail to hook the soother on a desired object to keep it in position.

2 1
* The DC LPS power adapter is not pro vided in the package.

1 Connect the baby monitor (Cont’d)
Charge the parent unit battery
When you have connected and turned on the soother and all the parent units, they will enter pairing mode automatically. It takes around 10 minutes for the pairing process to complete. When the parent unit and soother are successfully paired, the parent unit power LED is on steadily. The baby monitor is ready to use.
Notes
· Before using the baby monitor for the first time, charge the parent unit battery for 12 hours. · It takes longer to charge the battery when the parent unit is turned on. To shorten the charging time,
turn the parent unit off while charging. · The standby time varies depending on the sensitivity level you set, your actual use and the age of the
battery. · The parent unit beeps twice every 10 minutes and the light flashes in red when the battery is low.
Charge the parent unit battery without interruption for at least 30 minutes. · To keep the battery charged, connect it to AC power when not in use.

2 Before use

Note
· This baby monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.

Test your baby monitor
You may test the baby monitor before initial use, and at regular times thereafter.

Caution
· For hearing protection, make sure the parent unit is more than 3 feet (1 meter) away from the baby unit. If you hear any high-pitched noise, move the parent unit further until the noise stops. You can also press on the parent unit to lower or mute the noise.
1. Make sure your soother and parent unit are on.
2. Speak towards the microphone of the soother You will hear the sound at the parent unit, and see the visual sound indicators light up.

> 3ft (1m)

Note
· When the POWER/LINK LED light flashes, move the parent unit closer to the soother (observe the minimum distance of 3 feet / 1 meter). You can also check if the soother is connected to a live power socket and switched on.

Tip
· Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the soother.

Positioning the baby monitor

Caution
· Keep the soother out of the reach of your baby. Never place or mount the soother inside the baby’s crib or playpen.

1. Place the soothers more than 3 feet (1 meter) away from

your baby.

2. Place the parent unit more than 3 feet (1 meter) away from the

soother to avoid screeching noise.

> 3ft (1m)

Caution

· The default volume of your parent unit is level 3, and the maximum volume is level 5. If you experience high-pitched screeching noise from

your baby monitor while positioning:

– Make sure your soothers and parent unit are more than

3 feet (1 meter) apart, OR

– Turn down the volume of your parent unit.

Operating range

> 3ft (1m)

The operating range of the baby monitor is up to 1000 feet (300 meters) outdoors or 160 feet (50 meters) indoors. The actual operating range may vary depending on the environmental conditions and other interferences such as walls, doors and other obstructions.

< 3ft (1m)

3 Using the baby monitor
Power on or off the soother
· Switch to ON to turn on the soother. · Switch to OFF to turn off the soother. · Switch to to use the soothing functions
on the soother only.
Power on or off the parent unit
· Press and hold to turn on the parent unit. The POWER / LINK LED light turns on.
· Press and hold again to turn off the parent unit. The POWER / LINK LED light turns off.

3 Using the baby monitor (Cont’d)
Adjust parent unit speaker volume
The speaker volume is preset to level 3, and the maximum volume is level 5. You can adjust it to your preferred volume level. · Press or on the parent unit to adjust the speaker volume.
Note
· If you continue to press or when the volume reaches the minimum or maximum setting, the parent unit will beep twice.
To mute the speaker volume: · Press repeatedly until the volume reaches the minimum.
Notes
· When the parent unit is in mute, the visual sound indicator will still indicate the sound detected from the soother.
· To unmute, press repeatedly until it reaches your desired volume.

Parent unit alert tones

Low battery tone Out of range tone

· Beeps twice every 10 minutes when the battery is low. · Beeps three times every 30 seconds when there is no link
between the soother and parent unit, or when the parent unit is out of range from the soother.

CABLE MANAGEMENT

Parent unit battery: 2.4V NiMH battery

Frequency control Transmit frequency Channels Nominal effective range Power requirements

Crystal controlled PLL synthesizer Soother: 1921.536 – 1928.448 MHz Parent unit: 1921.536 – 1928.448 MHz 5 Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time of use. Soother adapter: Output: 5V DC @ 600mA Parent unit adapter: Output: 6V DC @ 400mA

Technical speFLFations

Soother overview

7 8

Lullaby

Dimmable soft-glow night light

· Press to play or stop the lullaby.

· Press to turn on the night light in

dim light or bright light mode.

vol-

· Press to decrease the speaker

volume.

10 ON/ OFF/ power switch

· Slide to power on or off the soother,

Auto-off timer

or use the soothing functions

· Press to turn on a 60-minute timer

on the soother only.

while playing lullaby or soothing sound. It will automatically stop

11 DC jack for battery charging only

the lullaby or soothing sound after 12 playing for 60 minutes.

Slot for the additional strap

Skip

13 Speaker

· Press to skip to the next lullaby or soothing sound.

Auto-off timer light indicator · On when the auto-off timer feature

Tail

· Hook the soother on an object.

is turned on. · Off when the auto-off timer feature
is turned off.

Dimmable soft-glow night light

Battery status light indicator

Soothing sound

· Press to play or stop the soothing sound.

· On when the battery is being charged.
· Flashes when the battery is low and needs charging.

· Off when the battery is not being

vol +

charged; or the battery is fully

· Press to increase the speaker

charged.

volume.

Parent unit overview

Use the soother
Power on or off the soother · Slide the power switch on the right-hand side of
the soother to on or off.
NOTE
· Make sure the soother is on before using other features.

Play the lullaby
The soother has five lullabies for you to comfort your baby.

1. Brahms· Lullaby 2. Rock a Bye Baby
3. Hush Little Baby

4. Minuet in G, Bach
5. Twinkle Twinkle Little Star

· Press to start playing lullabies.
· Press to skip to the next lullaby.
· While a lullaby is playing, press again to stop the lullaby.

NOTES
· The soother will play the lullabies continuously unless you manually stop the lullabies or turn on the auto-off timer feature.
· When a lullaby ends, the soother automatically skips to the next lullaby. After the soother plays the fifth lullaby, it restarts playing from the first lullaby again.

Play the soothing sound
The soother has five soothing sounds for you to comfort your baby.

1. White noise 2. Stream 3. Crickets

4. Birds 5. Heartbeat

· Press to start playing soothing sounds.
· Press to skip to the next soothing sound.
· While a soothing sound is playing, press again to stop the soothing sound.

NOTES
· The soother will play the soothing sounds continuously unless you manually stop the soothing sounds or turn on the auto-off timer feature.
· The soother will repeat the same soothing sound again and again unless you skip to the other soothing sounds.

Adjust the speaker volume · Press vol- or vol+ at any time.
NOTES
· The soother beeps to notify you when the speaker volume is already at the highest or lowest setting while adjusting.
Turn on or off the auto-off timer While the soother is playing a lullaby or soothing sound, the auto-off timer feature helps you automatically stop the lullaby or soothing sound after playing for 60 minutes.
1. While a lullaby or soothing sound is playing, press to turn on the auto-off timer feature. · The soother starts counting down 60 minutes. The auto-off timer light indicator on the left-hand side of the soother turns on.
2. After 60 minutes, the soother will automatically stop any lullaby or soothing sound. The autooff timer feature and the corresponding light indicator will turn off.
NOTES
· You can only turn on the auto-off timer feature when the soother is playing a lullaby or soothing sound.
· The auto-off timer feature will not power off the soother after the 60-minute countdown.
· You can press again to turn off the auto-off timer feature during the 60-minute countdown.
· If you manually stop the lullaby or soothing sound while the auto-off timer is counting down, the auto-off timer will turn off.
Turn on or off the dimmable soft-glow night light When the soother is on, press repeatedly to choose from below night light options:
· Turn on the night light in dim light mode, or · Turn on the night light in bright light mode, or · Turn off the night light.
NOTES
· The night light will be automatically off after 15 minutes.

1 Visual sound indicators

POWER / LINK

The visual sound indicators can show the sound level detected by the soother or the volume level during speaker volume setting.
Sound level detected by the soother

· Lights on steadily in green when the parent unit is on and linked to the soother.
· Flashes in green when there is no link between the soother and parent unit, or when the parent unit is out of range from the soother.

One to three green lights indicate a moderate sound level detected by

· Steady on in red when the parent unit is charging.

the soother .

· Flashes in red when the battery is low.

· Additional red lights indicate a higher sound level detected by the

(Volume down) · Press to decrease the parent unit
speaker volume.

soother (e.g. baby crying loudly).

5 Belt clip

Speaker volume level ·

(On/off)

One to three green lights indicate

· Press and hold to turn on or off the

Level 1 to Level 3 of the speaker

parent unit.

volume setting.
· Additional red lights indicate Level

7 Power jack

(Volume up)

4 to Level 5 of the speaker volume setting.

· Press to increase the parent unit speaker volume.

9 Speaker

Limited warranty
What does this limited warranty cover? The manufacturer of this VTech Product warrants to the holder of a valid proof of purchase (“Consumer” or “you”) that the Product and all accessories provided in the sales package (“Product”) are free from defects in material and workmanship, pursuant to the following terms and conditions, when installed and used normally and in accordance with the Product operating instructions. This limited warranty extends only to the Consumer for Products purchased and used in the United States of America and Canada.
What will VTech do if the Product is not free from defects in materials and workmanship during the limited warranty period (“Materially Defective Product”)? During the limited warranty period, VTech’s authorized service representative will replace at VTech’s option, without charge, a Materially Defective Product. If we choose to replace the Product, we may replace it with a new or refurbished Product of the same or similar design. We will retain defective parts, modules, or equipment. Replacement of the Product, at VTech’s option, is your exclusive remedy. VTech will return the replacement Products to you in working condition. You should expect the replacement to take approximately 30 days.
How long is the limited warranty period? The limited warranty period for the Product extends for ONE (1) YEAR from the date of purchase (90 days on products purchased as Refurbished*). This limited warranty also applies to the replacement Product for a period of either (a) 90 days from the date the replacement Product is shipped to you or (b) the time remaining on the original one-year warranty (90-day limited warranty on products that are purchased as Refurbished*); whichever is longer.
*Refurbished products purchased from our online store carry a 90-day replacement warranty.
What is not covered by this limited warranty? This limited warranty does not cover: 1. Product that has been subjected to misuse, accident,
shipping or other physical damage, improper installation, abnormal operation or handling, neglect, inundation, fire, water or other liquid intrusion; or 2. Product that has been damaged due to repair, alteration or modification by anyone other than an authorized service representative of VTech; or 3. Product to the extent that the problem experienced is caused by signal conditions, network reliability, or cable or antenna systems; or 4. Product to the extent that the problem is caused by use with non-VTech accessories; or 5. Product whose warranty/quality stickers, product serial number plates or electronic serial numbers have been removed, altered or rendered illegible; or 6. Product purchased, used, serviced, or shipped for repair from outside the United States of America or Canada, or used for commercial or institutional purposes (including but not limited to Products used for rental purposes); or 7. Product returned without a valid proof of purchase (see item 2 below); or 8. Charges for installation or set up, adjustment of customer controls, and installation or repair of systems outside the unit.

How do you get warranty service? To obtain warranty service in the USA, please visit our website at www.vtechphones.com or call 1 (800) 5959511. In Canada, go to www.vtechcanada.com or call 1 (800) 267-7377. NOTE: Before calling for service, please review the user’s manual – a check of the Product’s controls and features may save you a service call. Except as provided by applicable law, you assume the risk of loss or damage during transit and transportation and are responsible for delivery or handling charges incurred in the transport of the Product(s) to the service location. VTech will return replaced Product under this limited warranty. Transportation, delivery or handling charges are prepaid. VTech assumes no risk for damage or loss of the Product in transit.
What must you return with the Product to get warranty service? 1. Return the entire original package and contents
including the Product to the VTech service location along with a description of the malfunction or difficulty; and 2. Include a “valid proof of purchase” (sales receipt) identifying the Product purchased (Product model) and the date of purchase or receipt; and 3. Provide your name, complete and correct mailing address, and telephone number.
Other limitations This warranty is the complete and exclusive agreement between you and VTech. It supersedes all other written or oral communications related to this Product. VTech provides no other warranties for this Product. The warranty exclusively describes all of VTech’s responsibilities regarding the Product. There are no other express warranties. No one is authorized to make modifications to this limited warranty and you should not rely on any such modification. State/Provincial Law Rights: This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. Limitations: Implied warranties, including those of fitness for a particular purpose and merchantability (an unwritten warranty that the Product is fit for ordinary use) are limited to one year from the date of purchase. Some states/ provinces do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. In no event shall VTech be liable for any indirect, special, incidental, consequential, or similar damages (including, but not limited to lost profits or revenue, inability to use the Product or other associated equipment, the cost of substitute equipment, and claims by third parties) resulting from the use of this Product. Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please retain your original sales receipt as proof of purchase.

General product care

To keep this product working well and looking good, follow these guidelines:
· Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).
· DO NOT expose it to direct sunlight or moisture. · Avoid dropping the product or treating it roughly. · Clean with a soft cloth. · DO NOT immerse the parent unit and the soother in water and do not clean them under the tap. · DO NOT use cleaning spray or liquid cleaners. · Make sure the soother and parent unit are dry before you connect them to the mains again.

Storage
When you are not going to use the baby monitor for some time, store the parent unit, the soother and the adapters in a cool and dry place.

Frequently asked questions

Below are the questions most frequently asked about the baby monitor. If you cannot find the answer to your question, visit our website at www.vtechphones.com, or contact 1 (800) 595-9511 for customer service.

Why doesn’t the POWER Perhaps the soother is not connected to the power supply. Connect the soother to light on the soother turn on power supply. The soother turns on. when I switch on the units?

Why doesn’t the POWER / LINK light on the parent unit turn on when I switch on the units?

Perhaps the battery of the parent unit is depleted and the parent unit is not connected to power supply. Connect the parent unit to power supply and charge the parent unit battery. The parent unit turns on and establishes connection with the soother.

Why does the baby monitor not respond normally?

Try the following (in the order listed) for common cure: 1. Disconnect the power to the soothers and the parent unit.
2. Remove the battery from the parent unit.
3. Connect the soother to the power supply again. The soother turns on.
4. Connect the parent unit to the power supply again. The parent unit turns on.
5. Wait for the parent unit to synchronize with the soothers. Allow up to one minute for this to take place.
6. Press or to adjust the speaker volume on the parent unit.

Why does the baby monitor produce a high-pitched noise?

The parent units and soother may be too close to each other.
· Move the parent unit away from the soothers until the noise stops; OR · Turn down the volume of your parent unit.

Why does the parent unit The parent unit beeps three times every 30 seconds when the soother is out of range.

beep?

Move the parent units closer to the soother (but not less than 3 feet).

The parent unit may not have enough charge for the parent unit to perform normally. Charge the battery in the parent unit for at least 30 minutes.

Why don’t I hear a sound/ Make sure that both soother and parent unit are on. If you see the visual sound indicators

Why can’t I hear my baby light up, but there is no sound, then you may have muted the volume or set it to a lower

cry?

level. Adjust the volume to a higher level.

If the visual sound indicators do not light up, and you cannot hear any sound, it is because the sound is too low for the soother to detect. This is normal. Place the soother at least 3 feet / 1 meter away from your baby.

Why does the light on The parent unit beeps twice every 10 minutes and the light flashes in red when the

the parent unit flash?

battery is low. Connect the parent unit to the power supply and charge the battery for at

least 30 minutes.

Why can’t I establish a connection? Why is the connection lost every now and then? Why are there sound interruptions?

The soother may be out of range. Move the parent units closer to the soother (but not less than 3 feet).
Other electronic products may cause interference with your baby monitor. Try installing your baby monitor as far away from these electronic devices as possible.

FCC and IC regulations

FCC Part 15

Industry Canada

This equipment has been tested and found to comply with the requirements for a Class B digital device under Part 15 of the Federal Communications Commission (FCC) rules. These requirements are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Devel opment Canada’s licence-exempt RSS(s). Operation is subj-ect to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation ofthe device.

instructions, may cause harmful interference to radio commu- The term `’IC:`’ before the certification/registration number only

nications. However, there is no guarantee that interference signifies that the Industry Canada technical specifications were

will not occur in a particular installation. If this equipment

met.

does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

This product meets the applicable Innovation, Science and Economic Development Canada technical specifications.

ence by one or more of the following measures:

RF radiation exposure statement

· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and

The device has been tested and complies with FCC and IC SAR limits.

receiver.

This equipment complies with Industry Canada RSS-102 with

· Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

respect to Canada’ s Health Code 6 for Exposure of Humans to RF Fields.
To ensure safety of users, the FCC has established criteria for the amount of radio frequency energy that can be safety absorbed by a user or bystander according to the intended usage of the product. This product has been tested and

This device complies with Part 15 of the FCC rules. Operation is found to comply with the FCC criteria. The Soother (baby subject to the following two conditions: (1) this device may not unit) shall be installed and used such that parts of all persons’

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This Class B digital apparatus complies with Canadian require ment: CAN ICES-3 (B)/NMB-3(B)

body are maintained at a distance of approximately 20 cm (8 inches) or more. For body worn operation, this parent unit has been tested and meets the FCC RF exposure guidelines when used with the accessories supplied or designed for this product. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

California Energy Commission battery charging testing mode

This baby monitor meets the California Energy Commission (CEC) regulations for energy consumption. Your baby monitor is set up to comply with the energy-conserving standards right out of the box. Follow the instructions to install and charge the battery. The CEC battery charging testing mode is activated while charging. Even if the parent unit is paired to soothers, the CEC battery charging testing mode is activated while it is powered off and charging.

The RBRC seal
The RBRC seal on the Ni-MH battery indicates that VTech Communications, Inc. is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States and Canada. The program provides a convenient alternative to placing used Ni-MH batteries into the trash or municipal waste, which may be illegal in your area. VTech’s participation makes it easy for you to drop off the spent battery at local retailers participating in the program or at authorized VTech product service centers. Please call 1 (800) 8 BATTERY® for information on Ni-MH battery recycling and disposal bans/restrictions in your area. VTech’s involvement in this program is part of its commitment to protecting our environment and conserving natural resources.
The RBRC Seal and 1 (800) 8 BATTERY® are registered trademarks of Call2recycle, Inc.

Disclaimer and Limitation of Liability

VTech Communications, Inc. and its suppliers assume no responsibility for any damage or loss resulting from the use of this user’s manual. VTech Communications, Inc. and its suppliers assume no responsibility for any loss or claims by third parties that may arise through the use of this product. Company: VTech Communications, Inc. Address: 9020 SW Washington Square Road – Ste 555 Tigard, OR 97223, United States Phone: 1 (800) 595-9511 in the U.S. or 1 (800) 267-7377 in Canada

For cETL compliance only

Mesures de sécurité importantes La plaque signalétique appliquée se trouve dans le compartiment à piles des unités bébé et parents. Lorsque vous utilisez votre appareil, vous devriez toujours suivre certaines mesures de précaution de base afin de réduire les risques d’incendie, d’électrocution et de blessures corporelles, dont ceux qui suivent : 1. Observez toutes les instructions et mises en garde inscrites sur
l’appareil. 2. L’installation par un adulte est requise. 3. MISE EN GARDE: N’installez pas l’unité du bébé à une hauteur
supérieure à 2 mètres. 4. Ce produit ne remplace pas la surveillance adulte du nourrisson.
La supervision du nourrisson est la responsabilité du parent ou de la personne qui s’occupe de l’enfant. Ce produit pourrait cesser de fonctionner et, par conséquent, vous ne devriez pas présumer qu’il continuera de fonctionner correctement pendant une période de temps donnée. De plus, il ne s’agit pas d’un instrument médical et ne devrait pas être utilisé comme tel. Ce produit est destiné à vous aider à superviser votre bébé. 5. N’utilisez pas cet appareil près de l’eau ni de toute autre source d’humidité, par exemple, près d’une baignoire, cuve à lessive, évier de cuisine, dans un sous-sol humide ni près d’une piscine, dans un soussol humide ou une douche. 6. MISE EN GARDE: Utilisez uniquement la pile fournie. Un risque d’explosion pourrait survenir si un mauvais type de pile est utilisé pour l’unité du parent. La pile ne peut pas être soumise à des températures extrêmes élevées ou basses et à une faible pression d’air à haute altitude pendant l’utilisation, l’entreposage ou le transport. L’élimination de la pile dans le feu ou dans un four chaud, ou l’écrasement ou le découpage mécanique de la pile peuvent entraîner une explosion. Laisser la pile dans un environnement à température extrêmement élevée peut entraîner une explosion ou la fuite d’un liquide ou d’un gaz inflammable. Une pile soumise à une pression d’air extrêmement basse peut provoquer une explosion ou une fuite de liquide ou de gaz inflammable. Éliminer la pile usagée conformément aux informations du Sceau RBRC. 7. N’utilisez que les adaptateurs inclus avec ce produit. L’utilisation d’un adaptateur dont la polarité ou la tension serait inadéquate risque d’endommager sérieusement le produit et mettre Sortie : 6V DC 400mA / 5V DC 400mA VTECH TELECOMMUNICATIONS LTD. Modèle : VT05UUS06040 / VT05EUS05040
Informations sur les piles rechargeables : 2.4V NiMH battery YIYANG CORUN BATTERY CO LTD. Modèle : NI-MHAAA400×2-FF 8. Lorsqu’ils sont branchés dans une prise de courant, les adaptateurs secteur ont été conçus pour être orientés correctement, soit à la verticale ou au plancher. Les broches n’ont pas été conçues pour supporter le poids du bloc d’alimentation et le maintenir en place si celuici est branché dans une prise au plafond, sous une table ou dans un meuble. 9. Pour les PRODUITS À BRANCHER À UNE PRISE DE COURANT, la prise de courant doit être installée près du produit, afin d’assurer une accessibilité sécuritaire à la prise de courant. 10. Débranchez ce produit de la prise de courant avant de procéder au nettoyage. N’utilisez pas de nettoyants en aérosols. Utilisez un chiffon humide pour le nettoyer. 11. Débranchez les cordons d’alimentation avant de remplacer le bloc-piles. 12. Ne coupez pas les cordons d’alimentation pour remplacer les fiches, car ceci peut présenter un danger potentiel. 13. Ne laissez aucun objet reposer ni appuyer sur le cordon d’alimentation. N’installez pas cet appareil dans un endroit où l’on risque d’écraser le cordon d’alimentation ou de le piétiner. 14. Ne faites fonctionner cet appareil qu’avec le type d’alimentation indiqué sur l’étiquette. Si vous ne connaissez pas le type d’alimentation que vous possédez à votre domicile, consultez votre marchand ou votre compagnie locale d’électricité. 15. Ne surchargez pas les prises de courant murales ni les rallonges électriques. 16. Ne placez pas cet appareil sur un chariot, meuble, trépied, support de montage ni table chancelants. 17. Les trous et ouvertures du boîtier, situés à l’arrière de l’appareil ou sous celui-ci, servent à aérer l’appareil. Pour l’empêcher de surchauffer, ne bloquez sous aucun prétexte ces ouvertures et n’empêchez pas l’aération adéquate de l’appareil en le plaçant sur

un lit, divan, tapis ou toute autre surface similaire. De même, ne le positionnez pas à proximité ni au-dessus d’une source de chaleur ou d’un calorifère. De plus, ne placez pas l’appareil dans un endroit avant de vous assurer qu’il y ait une bonne circulation d’air. 18. N’enfoncez jamais d’objets à travers les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou causer des courts-circuits qui peuvent dégénérer en incendies ou en risques d’électrocution. Ne renversez jamais de liquide dans ce produit. 19. Afin de réduire les risques d’électrocution, ne démontez pas cet appareil, mais apportez-le dans un centre de service autorisé. L’ouverture du boîtier ou le retrait de toutes pièces que contient cet appareil, à l’exception de l’accès autorisé à certaines portes ou ouvertures, risque de vous exposer à des points de tension dangereux ou d’autres dangers. Un remontage incorrect peut par la suite présenter des risques d’électrocution. 20. Vous devriez tester la réception chaque fois que vous mettez l’appareil en fonction. 21. Examinez les composantes afin de vérifier si celles-ci ne sont pas endommagées. 22. Il existe un très faible risque de perte de confidentialité avec certains appareils électroniques (autres écoute-bébés, téléphones sans fils etc.). Pour l’éviter, s’assurer que le produit n’a jamais été utilisé avant l’achat, réinitialiser l’unité de façon périodique, éteindre l’écoute-bébé quand il n’est pas en cours d’utilisation. 23. Les enfants devraient être supervisés afin de vous assurer qu’ils ne jouent pas avec l’appareil. 24. Le produit n’est pas conçu pour être utilisé par des personnes (incluant des enfants) aux capacités physiques, sensorielles ou mentales réduites ou qui manquent d’expérience et de connaissances, à moins qu’on leur ait donné suffisamment de supervision ou d’instructions relativement à l’utilisation de l’appareil par une personne responsable de leur sécurité.
CONSERVEZ CES INSTRUCTIONS Mises en garde 1. Utilisez et entreposez le produit à une température entre 0° C
(32°F) et 40°C (104° F). 2. N’exposez pas cet appareil à des froids ou des chaleurs extrêmes,
ainsi qu’à la lumière directe du soleil. Ne l’installez pas près d’une source de chauffage. 3. Le bloc-piles ne doit pas être exposé à la chaleur excessive telle que la lumière du soleil ou au feu.

Avertissement – Risque de strangulation –

Les enfants se sont ÉTRANGLÉS dans des cordons.

Gardez ce cordon hors de portée des enfants (à

plus de 0,9 m). N’enlevez pas cette étiquette.

5. Ne jamais placer le moniteur à l’intérieur du berceau ou du parc de bébé. Ne jamais couvrir le moniteur

ou l’unité (s) portative avec un article tel une serviette ou une couverture.

6. D’autres équipements électroniques peuvent produire des

interférences sur votre moniteur vidéo et audio. Tentez d’installer votre moniteur vidéo ou audio à l’écart des appareils électroniques tels que des routeurs sans fil, radios, téléphones cellulaires, interphones, moniteurs, téléphones, ordinateurs personnels, électroménagers et téléphones sans fil.

Stimulateurs cardiaques implantés dans l’organisme

Les simulateurs cardiaques (ne s’applique qu’aux dispositifs numériques sans fil) :

L’organisme `Wireless Technology Research, LLC (WTR)’, une firme de recherche indépendante, a mené une évaluation pluridisciplinaire des

interférences entre les téléphones sans fil portatifs et les stimulateurs cardiaques implantés dans l’organisme. Appuyée par l’Administration

des aliments et drogues (FDA) des États-Unis, la firme WTR recommande aux médecins:

Avis aux détenteurs de stimulateurs cardiaques

· Vous devriez maintenir les dispositifs sans fil à au moins six pouces

du simulateur cardiaque.

· Ils ne doivent PAS placer le téléphone sans fil directement sur le stimulateur cardiaque, tel que dans une poche de chemise, lorsque celui-ci est en marche.

L’étude effectuée par l’organisme WRS n’a pas identifié de risque pour les détenteurs de simulateurs cardiaques causés par les gens qui utilisent dispositifs sans fil à proximité de ceux-ci.

Champs électromagnétiques (EMF)

Ce produit de VTech est conforme à toutes les normes se rapportant aux champs électromagnétiques (EMF) standard. Si vous le manipulez correctement en suivant les instructions de ce guide, son utilisation

sera sécuritaire pendant de nombreuses années, selon les meilleures évidences scientifiques dont nous disposons aujourd’hui.