Scooter Time Bluey

Product Information

The Scooter Time Bluey is a toy scooter that features a moving
tail, talking capabilities, and obstacle avoidance. It is designed
for children to enjoy interactive play with Bluey, a popular
character from the show.

Product Features

• Power Switch: Slide the switch to turn the
  unit on or off.
• Mode Switch: Select one of the three available
  modes of play.
• Light Up Buttons: Press the buttons to hear
  nature sounds, Bluey’s catchphrases, and theme music from the
  show.
• Sensors: Front and back sensors help Bluey
  avoid obstacles and allow for guided movements. Ensure obstacles
  are placed directly in front of the sensors for optimal
  performance.
• Automatic Shut-Off: The scooter will turn off
  automatically after a few minutes of inactivity to preserve battery
  life.

Modes of Play

1. Free Play: Scoot around with Bluey and use the
   sensors to guide her movements and hear fun phrases.
2. Follow Me: Listen carefully and mimic Bluey’s
   moves and sounds.
3. Show Time: Dance along as Bluey scoots around
   to music from the show.

Care & Maintenance

1. Keep the unit clean by wiping it with a slightly damp
   cloth.
2. Avoid exposing the unit to direct sunlight and heat
   sources.
3. If the unit will not be used for an extended period, remove the
   batteries.
4. Avoid dropping the unit on hard surfaces and keep it away from
   moisture or water.

Troubleshooting

If the unit stops working or malfunctions, follow these
steps:

1. Turn the unit off.
2. Remove the batteries to interrupt the power supply.
3. Let the unit stand for a few minutes, then replace the
   batteries.
4. Turn the unit on again. It should be ready to play with.
5. If the unit still doesn’t work, install a brand new set of
   batteries.

Product Usage Instructions

Unlock the Packaging Locks

Rotate the packaging locks 90 degrees anticlockwise. Pull out
the packaging locks and discard.

Getting Started

This product is in Try-Me ( ) mode in the packaging. Move the
Power Switch to the ON ( ) position to exit Try-Me mode. If the
unit powers down during play, please install a new set of
batteries.

Battery Removal and Installation

1. Make sure the unit is turned off.
2. Find the battery cover located on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the battery
   cover.
4. Remove old batteries.
5. Install 4 new AA (LR6/AM-3) batteries following the diagram
   inside the battery box. Alkaline batteries or fully charged Ni-MH
   rechargeable batteries are recommended for best performance.
6. Replace the battery cover and tighten the screw to secure.

Disposal of Batteries and Product

Dispose of old batteries and the product according to local
regulations and guidelines.

Instruction Manual
BLUEY (word mark and character logos) are trade marks of Ludo Studio Pty Limited and are used under licence. BLUEY logo © Ludo Studio Pty Limited 2018. Licensed by BBC Studios. BBC is a trade mark of the British Broadcasting Corporation and is used under licence. BBC logo © BBC 1996

INTRODUCTION
Thank you for purchasing Scooter Time Bluey. Explore with Bluey as she scoots around moving her tail, talking and avoiding obstacles on her scooter.

1 3
1 Back Sensor 2 Power Switch 3 Mode Switch

2 4 5
4 Light Up Buttons 5 Front Sensor
2

INCLUDED IN THE PACKAGE
· Scooter Time Bluey · Quick Start Guide WARNING: All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety. NOTE: Please save this Instruction Manual as it contains important information. IMPORTANT NOTE: 1. For optimal performance, please use the scooter on a flat, smooth
surface. It is advisable to play with the scooter in a spacious indoor area. 2. For your child’s safety, ensure that the scooter wheels are kept away from clothing, skin and hair.
Unlock the Packaging Locks:
Rotate the packaging locks 90 degrees anticlockwise. Pull out the packaging locks and discard.
3

GETTING STARTED
This product is in Try-Me ( ) mode in the packaging. Move the Power Switch to the ON ( ) position to exit Try-Me mode. If the unit powers down during play, please install a new set of batteries.
INSTRUCTIONS

WARNING:
Adult assembly required for battery installation. Keep batteries out of reach of children.
Battery Removal and Installation
1. Make sure the unit is turned Off. 2. Find the battery cover located on the bottom
of the unit, use a screwdriver to loosen the screw and then open the battery cover. 3. Remove old batteries. 4. Install 4 new AA (LR6/AM-3) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended.) 5. Replace the battery cover and tighten the screw to secure.

IMPORTANT: BATTERY INFORMATION

· Insert batteries with the correct polarity (+ and -).

· Do not mix old and new batteries.

· Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.

· Only batteries of the same or equivalent type as recommended

are to be used.

· Do not short-circuit the supply terminals.

· Remove batteries during long periods of non-use.

· Remove exhausted batteries from the toy.

· Dispose of batteries safely. Do not dispose of batteries in fire.

4

RECHARGEABLE BATTERIES · Remove rechargeable batteries (if removable) from the toy before
charging. · Rechargeable batteries are only to be charged under adult supervision. · Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or on their respective packaging, indicates they must not be disposed of in domestic waste as they contain substances that can be damaging to the environment and human health. The chemical symbols Hg, Cd or Pb, where marked, indicate that the battery contains more than the specified value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators Regulation. The solid bar indicates that the product was placed on the market after 13th August, 2005. Please dispose of your product and batteries responsibly. In the UK, give this toy a second life by disposing of it at a small electricals collection point* so all of its materials can be recycled. Learn more at: www.vtech.co.uk/recycle www.vtech.com.au/sustainability * Visit www.recyclenow.com to see a list of collection points near you.
5

PRODUCT FEATURES
1. Power Switch
To turn the unit On, slide the switch to the On position. To turn the unit Off, slide the switch to the Off position.
2. Mode Switch
Move the Mode Switch to select a mode of play. There are three modes to choose from.
3. Light Up Buttons
Press the Light Up Buttons to hear nature sounds, Bluey’s catchphrases and theme music from the show.
4. Sensors
The Sensors on the front and back of the scooter help Bluey avoid obstacles and allow you to guide her movements. If you are having problems triggering the sensors, make sure the obstacles are placed directly in front of the sensors. Avoid direct sunlight as this may affect the sensor.
6

5. Automatic Shut-Off
To preserve battery life, Scooter Time Bluey will automatically turn off after several minutes without input. The unit can be woken up again by pressing the Light Up Buttons.
MODES
1. Free Play
Play with Bluey as she scoots around. Use the Sensors to guide her movements and play fun phrases.
2. Follow Me
Listen carefully and follow Bluey’s moves and sounds.
3. Show Time
Dance along as Bluey scoots around to music from the show.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth. 2. Keep the unit out of direct sunlight and away from any direct
heat sources. 3. Remove the batteries if the unit will not be in use for an extended
period of time. 4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
7

TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps: 1. Please turn the unit OFF. 2. Interrupt the power supply by removing the batteries. 3. Let the unit stand for a few minutes, then replace the batteries. 4. Turn the unit ON. The unit should now be ready to play with again. 5. If the unit still does not work, install a brand new set of batteries.
If the problem persists, please contact our Consumer Services Department and a service representative will be happy to help you.
CONSUMER SERVICES
Creating and developing VTech® products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department with any problems and/or suggestions that you might have. A service representative will be happy to help you.
UK Customers: Phone: 0330 678 0149 (from UK) or +44 330 678 0149 (outside UK) Website: www.vtech.co.uk/support
Australian Customers: Phone: 1800 862 155 Website: support.vtech.com.au
NZ Customers: Phone: 0800 400 785 Website: support.vtech.com.au
8

PRODUCT WARRANTY/ CONSUMER GUARANTEES
UK Customers: Read our complete warranty policy online at vtech.co.uk/warranty. Australian Customers: VTECH ELECTRONICS (AUSTRALIA) PTY LIMITED ­ CONSUMER GUARANTEES Under the Australian Consumer Law, a number of consumer guarantees apply to goods and services supplied by VTech Electronics (Australia) Pty Limited. Please refer to vtech.com.au/consumerguarantees for further information.
9

Visit our website for more information about our products, downloads, resources and more.
www.vtech.co.uk www.vtech.com.au
TM & © 2023 VTech Holdings Limited. All rights reserved. IM-563800-001 Version:0