RS PRO 8977034 Magnetic Scale Inhibitor
Installation Instructions
- Turn off water supply.
- Drain relevant pipework or systern where the CalMag unit is to be installed.
- Allow time for system to cool down if fitted in line.
- Cut pipe to suit length of uni1. The unit should be installed a min imum of 1 metre from an appliance or on the incoming mains after the stop cock.
- Push the unit into place. ensuring that the fitt ings are pushed ful ly into position. Tighten the compression fi tt ings to make a seal. Do not overti hten.
- Re-open the system slowly. Check for leaks.
