Kitchen scale
Art no: 47031, 47032
Specifications
| Capacity: | 5 kg |
| Resolution | 1g |
| Units | g, oz, ml, fl.oz |
| Size: | 180x220x17 mm |
| Battery: | 1x CR2032 (included) |
Use
Flip the scale upside down. Unscrew the screw on the battery compartment lid. Open the battery compartment by sliding the lid to the side. Remove the plastic separator protecting the battery from getting used prematurely in the scale. Slide the battery compartment lid in place and attach the screw again.
- Place the scale on a flat and stable surface.
- Press the
Zero button to turn on the scale. The button is located on the side of the scale below the button marking. - Select the weight unit by pressing the Unit button (g, oz, ml, fl.oz).
- Place the item you want to weigh on the scale. The display shows the measured weight.
Reset the scale by pressing the 
Zero button. Turn off the scale by pressing and holding the Zero button for 2 seconds. The scale turns off automatically after 1 minute of inactivity.
Tare function
To measure the weight of an item inside a container, place the container without the item in it on the scale before turning it on. Press the Zero button to turn on the scale. Add the item you want to weigh in the container. The weight of the items inside the container is shown on the display. If you want to measure the weight of more items you can press the Zero button again and add more items to the container.
Error codes
The display shows the text “LO” if the battery level is low and the battery must be replaced. Flip the scale upside down. Unscrew the screw on the battery compartment lid. Open the battery compartment by sliding the lid to the side. Insert a new battery of the same type. Mind the polarity. Slide the battery compartment lid in place and attach the screw again.
The display shows the text “Err” to indicate the scale max load has been exceeded.
www.rubicson.com
Box 50435, Malm6é, Sweden
2023-03 -27
