medela Spare Teats Breast Milk Bottles
Ideal for feeding breast milk
Note: Only use Medela original accessories.
Make sure breastfeeding is well established before introducing a teat.
Cleaning and Hygiene
- Use drinking water quality for any of the following described cleaning procedures.
- Clean parts immediately after use to avoid dry up of milk residues and to prevent from growth of bacteria.
- Take care not to damage parts when using a brush.
- Inspect all items before each use.
- Replace parts if damaged or worn out.
- For hygiene reasons, we recommend replacing teats after 3 months.
- Note: Food colorings may discolor components that will not affect performance.
- Follow these cleaning instructions unless you are told otherwise by your healthcare professional.
- Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant („sterilizing solution“) for longer than recommended, as this may weaken the teat.
Prior to first use and once daily
- Disassemble, wash and rinse all parts.
- Place parts in a saucepan of sufficient capacity.
- Fill with cold water until the parts are well covered. Optionally, a teaspoon of citric acid may be added to avoid a build-up of limescale.
- Heat it up and allow to boil for 5 minutes.
- Remove from stove and drain water off.
- Dry parts with a clean towel.
As an alternative to boiling:
- Dishwasher: Clean parts in top rack.
- Microwave: Use Medela Quick Clean™ Microwave Bags or another microwave-safe device.
- Steam sterilizer: Follow the manufacturer’s instruction
After each use
- Disassemble and wash all parts in warm, soapy water.
- Rinse in clear water. Dry parts with a clean towel.
- After cleaning, when parts are not in use, put in a clean zip lock bag or store in a container with lid.
- Alternatively, the parts can be wrapped in a clean paper or cloth towel.
- Do not place in direct sunlight.
- Avoid touching the inside of bottles and lids.
For your child‘s safety and health WARNING!
- Always use this product with adult supervision.
- Never use feeding teats as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding
- Keep all components not in use out of the reach of children.
- Do not warm milk in a microwave oven as this may cause uneven heating and could scald your baby.
Material Silicone
Disposal According to local regulations
Conforms to EN 14350.
Medela | Breastfeeding products and medical vacuum technology
