CT-SDCF-BP Soundchief Vertical Workstation Cart
Product Information: Proaim Soundchief Vertical Workstation
Cart Back Panels (CT-SDCF-BP)
The Proaim Soundchief Vertical Workstation Cart Back Panels
(CT-SDCF-BP) are an essential accessory for your Soundchief cart.
The back panels are made of high-quality materials and are designed
to provide additional safety and support to your equipment during
transportation. The panels are easy to install and come with all
the necessary hardware and tools.
Included in the Box:
- L-Type Allen key – 5/16
- 1 x Top Tray & Bottom Tray
- 8 x Washer
- 8 x Allen Bolts (Size – 3/8 x 1/2)
All rights reserved. No part of this document may be reproduced,
stored in a retrieval system, or transmitted by any form or by any
means, electronic, mechanical, photo-copying, recording, or
otherwise, except as may be expressly permitted by the applicable
copyright statutes or in writing by the Publisher.
Product Usage Instructions:
- Inspect the contents of the package to ensure you have received
everything listed in the “Included in the Box” section. - Properly align the back panels and the Soundchief cart
together. - Insert the bolts provided and equally tighten them all. It is
important to ensure that all bolts are tightened equally to match
the threads of the plate. - For a visual guide on how to attach the back panels, follow
this video: https://bit.ly/3PSaG2n
Your Proaim Soundchief Vertical Workstation Cart back panels are
now ready to use and provide additional safety and support during
transportation. Optional accessories can also be added to enhance
the functionality of your cart.
1
Back Panels for Proaim Soundchief Vertical Workstation Cart (CT-SDCF-BP)
Assembly Manual
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
L-Type Allen key – 5/16″
1 x Top Tray & Bottom Tray
8 x Washer
8 x Allen Bolts (Size – 3/8″ x 1/2″)
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright
statutes or in writing by the Publisher.
2
Back Panels Setup
· Align the threads of the Cart with the Top Plate to cover the back side of the Soundchief Cart and then insert an Allen Bolt.
· Then, tighten the bolt with the help of an Allen Key, as shown in the image.
NOTE: Properly align the Back Panel and the Soundchief Cart together. Then insert the bolts and equally tighten them all. If the bolts are not all equally tightened, the threads can’t be properly matched to that of the plate.
· The Top Plate has been properly attached to the Soundchief Cart.
· Properly align the Bottom Plate to the bottom of the Soundchief Cart by matching the threads.
· Then insert the Allen bolt matching the holes, then tighten with the help of Allen key.
3
· Similarly, follow the same process to attach the remaining all Allen bolts.
How-to-attach-Soundchief-back-panels-CT-SDCF-BP-with-soundchief-cart, Follow this Video https://bit.ly/3PSaG2n
YOUR PROAIM BACK PANELS FOR PROAIM SOUNDCHIEF VERTICAL WORKSTATION CART ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company. Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.














