Elfa 7315496039803 Freestanding Click-in System Instruction Manual (+ PDF)

Home » Blog » Elfa 7315496039803 Freestanding Click-in System Instruction Manual

Contents hide

1 7315496039803 Freestanding Click-In System

2 Product Information:

3 Product Usage Instructions:

3.1 Assembling a Single-Sided Solution:

3.2 Adding a Section and Assembling a Double-Sided Solution:

4 Documents / Resources

7315496039803 Freestanding Click-In System

Product Information:

The product is a freestanding click-in system that can be used
as a room divider or for storage purposes. It consists of upright
standards, feet, stabilization bars, and optional wire shelves. The
system can be assembled as a single-sided solution or a
double-sided solution by adding additional sections.

Product Usage Instructions:

Assembling a Single-Sided Solution:

Start by mounting the feet. Screw a plain foot into the foot
for freestanding upright.
If you want to increase the height, attach a foot height
extender first and then screw the foot into the extender.
Choose the desired solution height by adjusting how deep you
screw the foot into the extender.
Insert the uprights into the feet. The bottom of the upright is
the part with the small holes on the side.
Secure the thicker stabilization bar between the uprights using
a mallet. Ensure they are completely in place by tapping
alternately on the left and right-hand sides.
Press down and knock the upright into the slot of the foot
using a mallet. Make sure the upright goes all the way down.
Repeat the process with the second foot and upright.
Mount your desired storage functions or proceed to Part Two for
a double-sided solution.

Adding a Section and Assembling a Double-Sided Solution:

Assemble the foot to the upright in the same way as for a
single-sided solution.
Slide in and mount the backside foot with a leveller.
Attach the stabilization bars in the hole.
Twist out the added upright so that the stabilization bars
lock.
Place the end caps (and center caps if applicable) on top of
the uprights.
Repeat with the second upright.
Attach the stabilization bars in an X shape, with the upright
sections placed as a T.
Twist to make the two uprights/feet parallel.
If adding a wire shelf at the bottom, use the provided clips to
attach the shelf on the front and back of the foot.

Remember to finetune the height of the feet using the included
wrench to ensure your system is level.

View Fullscreen

MOUNTING INSTRUCTION
FREESTANDING CLICK-IN SYSTEM (PART ONE)
SINGLE-SIDED SOLUTION

Freestanding is one of the mounting options within the Click-in system. This option is ideal when you can’t or don’t want to mount your system directly on the wall e.g. when the wall can’t carry the weight, there is a window or when you want to

leave the wall as it is. It’s also perfect as a room divider, since the upright standards are double-sided.
Complement with the features you need for storage to fit e.g. clothing, garage or laundry room.

You need the following to assemble your solution: · Mallet

ASSEMBLING A SINGLE-SIDED SOLUTION
Start by mounting the feet. Either a plain foot: screw into the Foot for freestanding upright

Stabilization bars Place the two pieces on the floor and insert the Stabilization bars in an “X” using the holes on the sides of the uprights.

Foot height extender

If you have chosen a foot height extender: Attach the extender first and then screw the foot into the extender.

You can choose the desired solution height, depending on how deep you screw the foot into the extender

Now insert the Uprights into the feet. The bottom of the upright is the part with the small holes on the side of the upright.

Turn up the upright pieces, using one hand where the other fixates the stabilization bars. Stand the unit upright. Place the unit towards the wall no more than 75 mm from the wall.
Secure the thicker stabilization bar between the uprights, using the mallet, ensuring they are completely into place. Alternate tapping the left and the right hand side.

Using a mallet, press down and knock the upright into the slot of the foot. Make sure the upright goes all the way down.
Repeat the process with the second foot/upright.

Place the two pieces on the floor and insert the Stabilization bars in an “X” using the holes on the sides of the uprights.
Go on mounting your storage funtions. Otherwise follow the steps in part two adding an additional section and to make the solution double-sided.

MOUNTING INSTRUCTION
FREESTANDING CLICK-IN SYSTEM (PART TWO)
ADDING A SECTION AND ASSEMBLE A DOUBLE-SIDED SOLUTION

ADDING AN ADDITIONAL SECTION
Repeat the process with feet and upright and then place the additional upright with the front of the feet facing the current section.

ASSEMBLING A DOUBLE-SIDED SOLUTION
Assemble the foot to the upright (in the same way like for a single-sided solution) Then slide in and mount the “backside” foot with a leveller.

Attach the stabilization bars in the hole.

Twist out the added upright so that the stabilization bars lock.

Place the end caps (and center caps if you have more than one section) on top of the uprights.

Repeat with the second upright.

Then attach the stabilization bars in an “X”, with the upright sections placed as a “T”.

Then twist to make the two uprights/feet parallel.

BOTTOM WIRE SHELF
If you are adding a Wire shelf at the bottom (on top of the foot), use the special designed clips to attach the shelf on front and back.

REMEMBER TO FINETUNE
Make sure to finetune the height of the feet (with the included wrench) in order to have your system level.