Solar String Light User Manual

Product Information

The Solar String Light is a night lighting solution for gardens,
lawns, and outdoor spaces. It works by converting solar power into
rechargeable battery power during the day, which is then used to
illuminate the LED lights at night. The light automatically turns
on when the environment turns dark and turns off during the day to
store energy from the solar panel. The light’s working time depends
on geographical location, weather conditions, and seasonal light
availability.

Usage Instructions

Choosing an Ideal Location

Select a location that is not near strong lighting sources such
as street lights, as this may cause the light to turn off
automatically due to the built-in sensor that controls the light’s
working. Choose an outdoor location with full, direct sunshine
where the solar panel can receive at least 6 hours of sunshine time
each day. Shady locations will influence the batteries to charge
enough energy and shorten the working time of lighting in the
night.

The Solar String Light is ideal for night lighting of gardens,
lawns, and other outdoor spaces. You can also use it indoors by
putting it outside during the day to charge and bringing it inside
at night for illumination.

Attention for First Time Use

Before using the Solar String Light for the first time, there
are a few precautions to keep in mind:

The light is designed to work when the environment turns dark.
If there are strong light sources nearby, the LED light may be very
dim or not work at all.
Although the battery has been charged by the manufacturer, the
electric level may have dropped during shipping. Charge it for a
full day to realize maximum performance.
The surface of the solar panel must be kept clean. If it is
dusty, it will influence the efficiency of charging.

Turning on the Light

There is a red button (Power switch) in the battery box. Press
the Power switch (ON/OFF), and the automatic system will start to
work. When the environment turns dark, the Solar String Light will
light up automatically. During the day, the light will turn off and
store energy from the solar panel automatically.

If you press the button again, the current will break off to
keep energy. If the light cannot turn on automatically at night
after 6 hours of charging during the day, check the following:

Make sure the power switch is in the ON position (according to
the model).
Make sure the male/female connectors are connected correctly.
If you cannot turn on the whole light, it may be caused by false
connection for the connectors. Disconnect them and change another
direction to connect them again.
Ensure that the light is in a sunny location and not in a shady
area. The solar panel should face the sun.

View Fullscreen

SOLAR STRING LIGHT
USER’S MANUAL
HOW SOLAR LIGHT WORKS
During the day, the solar panel converts solar power into the rechargeable battery. At night, the light tums on automatically by stored energy. How long the light last to illuminate depends on your geographical location, weather conditions and seasonal light availability.
CHOOSING AN IDEAL LOCATION

The selected location should not be near strong lighting sources, such as street lights, which may cause light to turn off automatically because there is a sensor inside to feel brightness and control the light working. Solar light is ideal for night lighting of garden, lawn…… You can also use it like this way to put the solar light outdoor at day and take back indoor for illuminating.
ATTENTION FOR FIRST TIME USE

PRECAUTIONS
(1)To note that the light is designed to work when ambience turns to dark. If there are strong light sources nearby,the LED light may be very dim or not work at all; (2)Although the battery has been charged by the manufacturer, the electric level will have been probably dropped when you receive it. Please charge it for a full day to realize maximum performance. (3)Surface of the solar panel must keep clean. If it is dusty, it will influences efficiency of charging.

Choose an outdoor location with full ,direct sunshine where the solar panel can receive at least 6 hours of sunshine time each day. Shady locations will influence the batteries to charge enough energy and shorten the working time of lighting in night.

There is a red button(Power switch) in the battery box. Please press the Power switch(ON/OFF), then the automatic system will start to work. When environment turns to dark, solar light will light automatic. In day, solar light will turn off and store energy from solar panel automatic. If you press the button again, then current will break off to keep energy. If light can not turn on automatically in light after 6 hours of charging at day, please check follow things:
1)To make sure the power switch is in the”ON position. (According to the model). 2) .Please make sure the male/female connectors are
connected correctly. If you can not turn on the whole
light, it is caused by the false connection for the
connectors, please disconnect them and change
another direction to connect them again. 3)To be sure that light is in a sunny location and not in a shady area. The solar panel faces to the sun,