OAK X DINING TABLE
OAK X DINING TABLE
Product Information:
| Hardware Included: | DIN 912 BOLT M6x30 (4 pcs), WASHER M6 (4 pcs) |
| Tools Required: | L KEY (included in package), SCREW DRIVER (not included in package) |
| Parts to be Installed: | 1. TABLE TOP (1 pc), 2. LEGS (2 pcs), 3. STRETCHER (1 pc) |
Product Usage Instructions:
A. Installing Stretcher to the Legs:
– Attach the legs (2 pcs) to the stretcher (1 pc).
– Repeat the same step for the other leg.
– Do not tighten fully.
B. Installing Legs to Table Top:
– Place the table top (1 pc) on a flat surface.
– Attach the legs and stretcher assembly to the table top using
DIN 912 BOLT M6x30 (4 pcs) and WASHER M6 (4 pcs).
– Tighten fully.
C. Re-Tighten the Screw:
– Check all screws and bolts for tightness.
– Re-tighten any loose screws.
– Tighten fully.
D. Finish:
– The assembly of the OAK X Dining Table is now complete.
OAK X DINING TABLE ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION
HARDWARE ENCLOSED
DIN 912 BOLT M6x30 (4 pcs)
WASHER M6
(4 pcs)
1 / 3
TOOL
L KEY
SCREW DRIVER
(included in package) (not included in package)
1
IN YOUR PACKAGE :
ASSEMBLY INSTRUCTION HARDWARES (AS LISTED ABOVE)
PARTS TO BE INSTALLED 1. TABLE TOP 1 pc 2. LEGS 2 pcs 3. STRETCHER 1pc
2 3 2
NOTICE
SYMBOLS
X
ASSEMBLY INSTRUC TION
DIRECTION
NUMBER OF
PERSONS NEEDED
USE HAND
USE L KEY TO TIGHTEN
USE SCREW DRIVER TO TIGHTEN
X2
OAK X DINING TABLE ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION A INSTALLING STRETCHER TO THE LEGS
2 3 2
2 / 3
1 2
3 2
– DO THE SAME STEP FOR THE OTHER LEG – DO NOT TIGHTEN FULLY
B INSTALLING LEGS TO TABLE TOP
B
B
A
A
D
D
C
C
1
2
– USE DIN 912 BOLT M6x30 (4X) – USE WASHER M6 (4X) – TIGHTEN FULLY
3 / 3 OAK X DINING TABLE ASSEMBLY INSTRUCTIONS FOR DINING TABLE INSTALLATION C RE-TIGHTEN THE SCREW
– TIGHTEN FULLY
D FINISH
