Hermanmiller Fe1l Cyclade Occasional Table Instruction Manual

FE1L Cyclade Occasional Table

HermanMiller Cyclade Occasional Table

Product Information:

The HermanMiller Cyclade Occasional Table is a versatile piece
of furniture that can be used in various settings. It comes in
different sizes, including FE1L, FE1M, and FE1T, and is available
with either a Wood (W) or Stone (S) top. The table also has an
optional Cyclade Bowl for added functionality.

Parts Included:

  • A Cyclade Table Top – QTY 1 (only one top per package)
  • B Cyclade Leg – QTY 3/4
  • Cyclade Bowl (Optional)

Product Usage Instructions:

  1. Step 1: Place the table top on a clean protective surface top
    down.
  • WARNING: Exercise caution when lifting as the
    table may be heavy.
  • Step 2: Align a leg over the assembly hub and lower it until
    the internal threaded stud is inserted in the center hole of the
    attachment hub. Screw the leg into the attachment hub until it
    cannot be tightened anymore and the leg is tight against the
    surface of the top.
    • WARNING: Failure to fully tighten legs could
      result in table failure, legs breaking, or other damage.
  • Step 3: Repeat step 2 until all legs are attached and
    tight.
  • Step 4: Place the table right side up in the desired
    location.
  • Step 5 (Optional): Lower the Cyclade bowl gently into the
    opening in your table.
    • Note: Install Cyclade Glass Bowl (if
      applicable) into the center of the low height table.

    HermanMiller
    Cyclade Occasional Table Installation Instructions (FE1L, FE1M, FE1T, Wood (W) or Stone (S) top)

    Parts Included

    How to assemble your occasional table

    A Cyclade Table Top QTY 1 (only one top per package)

    B Cyclade Leg QTY 3/4

    Cyclade Bowl (Optional)

    WARNING
    Heavy! Excercise caution when lifting
    Step 1 1.1 Place the table top on a clean protective surface top down.

    WARNING
    Failure to fully tighten legs could result in table failure, legs breaking or other damage.
    Step 2 2.1 Align leg over assembly hub and lower until internal threaded stud is inserted in center hole of attachment hub. 2.2 Screw the leg into the attachment hub until it cannot be tightened anymore and leg tight against the surface of the top.

    HermanMiller Cyclade table

    1

    1BVMDF rev A

    Installation Instructions

    Step 3 3.1 Repeat steps 2 and 3 until all legs are attached and tight.

    Step 4 4.1 Place table right side up in desired location.

    Cyclade Low Table

    Step 5 (Optional) 5.1 Lower the Cyclade bowl gently into the opening in your table.
    Note: Install Cyclade Glass Bowl (if applicable) into center of the low height table.

    Cyclade Mid Table

    Cyclade Tall Table

    HermanMiller Cyclade table

    For more information about our products and services please visit us at hermanmiller.com or call (800) 851 1196. ©2023 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A. Part No. 1BVMDF ­ A

    2

    1BVMDF rev A

    Installation Instructions

    References

  • Documents / Resouces

    Download manual
    Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


    Related Manuals