Quick start guide
V500PRO
Backlit Mechanical Gaming Keyboard
Overview
A Num lock indicatorB Caps lock indicatorC Scroll lock indicator
| Fn+F1 = Ripple mode Fn+F2 = Static mode Fn+F3 = Reactive mode Fn+F4 = Breathing mode Fn+F5 = Starlight mode Fn+F6 = Roulette mode Fn+F7 = Curve mode Fn+F8 = Aurora mode Fn+F9 = Firework mode | Fn+F10 = Raindrop mode Fn+F11 = FPS gaming mode Fn+F1 2 = MOBA gaming mode Fn+Win =Win Lock Fn+→ = Frequency+ Fn+←= Frequency- Fn+↑ =Brightness+ Fn+↓ = Brightness- Fn = Light up Fn and combination keys |
Troubleshooting
I always press the Windows key while gaming.
Press Fn and Windows key simultaneously to lock the Windows key and prevent accidental activations.
System Requirements
Windows ®XP / Vista / 7 / 8 / 10 or later, USB port
Package contents
Warranty
The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
ISEDC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions suivantes:
(1) (‘appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de (‘appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
It is forbidden to reproduce any part of this quick start guide without the permission of Shenzhen Rapoo Technology Co., Ltd.
We, the manufacturer Declare that the product Complies with the following norms of: The product is in compliance with the essential requirements of The EMC Directive 2014/30/EU, and the ROHS directives 2011/65/EU. |
Declaration of Conformity
Made in China
