60921 Floor Parcel Box

User’s Manual: Floor Parcel Box

Thank you for choosing to purchase this quality product. The
Floor Parcel Box is a convenient and secure way to receive packages
at your doorstep. Please read and follow the operating instructions
and safety information prior to initial operation.

Parts List

Assembly Instructions

Before assembling the Floor Parcel Box, please make sure to read
the instructions carefully and ensure that you have all the
necessary parts listed above.

1. Attach the support components (E) to component 7.
2. Attach components 9 and 10 to each other using plastic washers
   (I).
3. Attach component 10 to components 1 and 3 on either side using
   fixing screws (F) and plastic washers (I).
4. Connect components 8 and 9 with each other.
5. Attach the lock (D) to component 2 using fixing screws
   (B).
6. Attach the base plate (G) to the Floor Parcel Box using
   sheet-metal screws (A).
7. Attach the Floor Parcel Box to the floor using floor dowels
   (J).
8. Apply sealing tape (C) to the edges of the Floor Parcel Box for
   added protection against water and dust.

Once assembled, you can start using your Floor Parcel Box.
Simply place your packages inside, lock it with the provided lock,
and rest assured that your packages are safe and secure until you
retrieve them.

If you have any questions or concerns about your Floor Parcel
Box, please contact our customer service team at
[email protected] or by phone at +49 2403 55592-0. For more
information, please visit our website at
https://www.wiltec.de/contacts/.

User’s manual Floor Parcel Box
60921­60924
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further developments.

The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating manual, nor in the diagrams and illustrations shown. Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely. If you have found an error or wish to suggest an improvement, we look forward to hearing from you. Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH Königsbenden 12 52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service team before returning your goods.
Retourenabteilung WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler Germany
E-mail: [email protected] Tel: +49 2403 55592-0 Fax: +49 2403 55592-15

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 2 04 2022-1

Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to always take some basic safety precautions when using this product. Please read this operating manual carefully and make sure that you understand it. Keep these operation instructions in a safe place.
Parts list

Part

Name

Qty.

A

Sheet-metal screw

40

B

Fixing screw M4

12

C

Sealing tape

1

D

Lock

1

E

Support for component 7

2

F

Fixing screw for component 10

2

G

Base plate

1

I

Plastic washers for components 9 and 10

4

J

Floor dowel

4

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 3 04 2022-1

Assembly

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 4 04 2022-1

Assembly

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 5 04 2022-1

After assembling the components 8 and 7 as well as the components 9 and 10, component 10 is attached on either side to component 1 and 3 with the help of the fixing screw F and component I. Then, components 8 and 9 are connected with each other.

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 6 04 2022-1

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 7 04 2022-1

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 8 04 2022-1

Important Note:

Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH.

https://www.XPOtool.com The Tool Experts

Item 60921­60924

Page 9 04 2022-1

References

• WilTec - Ihr Online Händler für Haus, Garten, Werkstatt & Freizeit