Direct Colors Dc-ccb-4oz Proclean Neutralizer User Guide

DC-CCB-4OZ ProClean Neutralizer

Product Information:

The ProClean NeutralizerTM is a cleaning solution designed for
concrete surfaces. It effectively removes residue and prepares the
surface for further treatment such as staining or sealing. The
solution comes in concentrate form and is available in two sizes: 1
gallon and 5 gallons.

Product Usage Instructions:

1. Calculate Solution Amount: Determine the size of your project
   in square feet. Keep in mind that 1 gallon of ProClean
   NeutralizerTM covers approximately 200 square feet.
2. Select Concentrate Size: Choose the appropriate concentrate
   size based on the amount of solution you need to make (1 or 5
   gallons).
3. Prepare Sprayer/Container: If using a sprayer, remove any
   filters. Pour the ProClean NeutralizerTM concentrate into the
   sprayer or a mixing container. Add the corresponding amount of
   water.
4. Mix Solution:
   • For 1 gallon: Mix 4 ounces of ProClean NeutralizerTM
     concentrate with 1 gallon of water.
   • For 5 gallons: Mix 1 quart of ProClean NeutralizerTM
     concentrate with 5 gallons of water.
5. Apply the ProClean NeutralizerTM Solution:
   • Wear spiked shoes to avoid leaving shoe prints on the
     floor.
   • Scrub the concrete surface using a scrub brush or a low-speed
     floor buffer with a brush attachment.
   • Remove the residue with a wet-dry vacuum (a cotton mop can be
     used, but it is less effective).
   • CAUTION: ProClean NeutralizerTM may be harmful if swallowed or
     ingested. Contact with skin can cause mild irritation. Avoid
     contact with eyes.
6. Rinse and Dry the Surface:
   • Rinse the surface thoroughly with plenty of water to wash away
     all residue.
   • Ensure that no residue remains on the surface as it can affect
     the adhesion of subsequent treatments.
   • Allow the surface to dry completely for at least 8 hours before
     applying a sealer.

Disclaimer: Direct Colors does not warranty or guarantee
results. Variations in concrete or improper application may lead to
unintended outcomes. It is recommended to test the product on an
inconspicuous or small area and allow it to fully cure before
proceeding with the entire project to ensure compatibility and
desired results.

Contact Information:

• Email: [email protected]
• Phone: (405) 275-6657

PROCLEAN NEUTRALIZERTM HOW-TO GUIDE
STEP 1: CALCULATE SOLUTION AMOUNT Determine project size in square feet. Remember, 1 gallon covers approximately 200 square
feet. STEP 2: SELECT CONCENTRATE SIZE
ProClean NeutralizerTM is available for making 1 or 5 gallons of solution.

STEP 4: PREPARE SPRAYER/CONTAINER Remove filters if using a sprayer. Pour concentrate into sprayer or mixing container. Add corresponding water amount.

STEP 3: MIX SOLUTION For 1 gallon: Mix 4 ounces of ProClean NeutralizerTM
concentrate with 1 gallon of water. For 5 gallons: Mix 1 quart of ProClean
NeutralizerTMconcentrate with 5 gallons of water.
REMOVE FILTER

STEP 5: APPLY THE PROCLEAN NEUTRALIZERTM SOLUTION
Wear spiked shoes to avoid leaving shoe prints on the floor.
Scrub the concrete surface using a scrub brush or a lowspeed floor buffer with a brush attachment.
Remove the residue with a wet-dry vacuum (a cotton mop can be used, but it is less effective).

CAUTION: ProClean NeutralizerTM may be harmful if swallowed or ingested. Contact with skin can cause mild irritation. Avoid contact with eyes.

STEP 6: RINSE AND DRY THE SURFACE
Rinse the surface thoroughly: Use plenty of water to wash away all residue from the surface. Ensure that no residue remains on the surface, as it is crucial for the success of the following steps.
Double-check for any remaining residue: IMPORTANT: Take extra care to remove all traces of residue from the surface. Applying a stain or sealer over any leftover residue will lead to poor adhesion, compromising the final result.
Let the surface dry completely: Wait for at least 8 hours before applying a sealer to ensure the surface is entirely dry. This waiting period is essential for the sealer to adhere correctly.
Disclaimer: Direct Colors does not warranty or guarantee results (outcomes). Concrete variations or improper application may cause unintended results. Test product on an inconspicuous or small area and allow to fully cure to ensure compatibility and desired result.

DirectColors.com

[email protected]

(405) 275-6657

References

• Direct Colors | Decorative Concrete Stains