OX02C1S Global Shutter Sensor
Product Information
Product Name: OX02C1S
The OX02C1S is a 2.5-megapixel Global Shutter Sensor designed
for Automotive In-Cabin Driver and Occupant Monitoring Systems. It
is equipped with advanced features and functions to provide
accurate monitoring and detection capabilities.
Sample units of the OX02C1S GS sensor are currently available
for evaluation, and it is expected to be in mass production by
2024. To learn more about the product, visit the official website
at www.ovt.com.
Ordering Information
To place an order for the OX02C1S sensor, please refer to the
provided ordering information.
Applications
- Occupant Monitor System
- In-Cabin Monitor System
Technical Specifications
The OX02C1S sensor offers the following technical
specifications:
- Row select FIFO MIPI/DVP
- Functional Block Diagram: image sensor core, image array,
temperature sensor, column ADCs, BLC, DigGain, analog gain control,
image signal processing, white balance gain, automatic
exposure/gain control, DPC (OTP+Dyn), window output interface, MIPI
DVP, security IP, PLL1, PLL2, timing generator and system control,
OTP (sensor), voltage monitor, OTP (crypto), SCCB interface, XCLK,
FSIN, XSHUTDN, TM GPIO[1:0], VSYNC INTR, VMERRB, 2.8V, 1.8V, 1.2V,
SID, SCL, SDA - Version: 1.1, June 2023
Contact Information
For any queries or support related to the OX02C1S sensor, please
contact OmniVision Technologies, Inc. at the following address:
4275 Burton Drive
Santa Clara, CA 95054
USA
Tel: +1 408 567 3000
Fax: +1 408 567 3001
Website: www.ovt.com
Trademark Information
OMNIVISION, the OMNIVISION logo, PureCel, OmniPixel, Nyxel, and
a-CSP are registered trademarks of OmniVision Technologies, Inc.
All other trademarks mentioned in this document are the property of
their respective owners.
Product Usage Instructions
To use the OX02C1S sensor effectively, please follow the
instructions below:
- Ensure that you have received the necessary components and
accessories along with the sensor. - Refer to the provided technical specifications for
compatibility and system requirements. - Install the sensor securely in the desired location within the
Automotive In-Cabin Driver and Occupant Monitoring System. - Connect the sensor to the appropriate interfaces using the
provided cables or connectors. - Power on the system and configure the settings as per your
requirements. - Refer to the user manual or documentation for detailed
instructions on integrating and utilizing the sensor within your
specific application. - If you encounter any issues or require further assistance,
please contact OmniVision Technologies, Inc. for support.
OX02C1S
2.5-megapixel product brief
OX02C1S Global Shutter Sensor for Automotive In-Cabin Driver and Occupant Monitoring Systems
The OX02C1S is a 2.5-megapixel (MP) RGB-IR BSI global shutter (GS) sensor for in-cabin driver and occupant monitoring systems (DMS and OMS). With a pixel size of just 2.2 microns (µm), it features Nyxel® near-infrared (NIR) technology with industry-leading NIR quantum efficiency (QE) at 36%. It also has a significant increase in modulation transfer function (MTF) over the previous 3.0 µm FSI GS pixel design. It offers extremely low power consumption for the highest-performance capabilities.
The OX02C1S GS sensor utilizes OmniPixel®4-GS technology for simultaneous image detection in all pixels to accurately reproduce rapid motion without any deformation. It features integrated ASIL-B and cybersecurity that meet the latest industry standards. It is available in an OMNIVISION stacked a-CSPTM package or a reconstructed wafer option. The OX02C1S sensor comes in a 1/3.52-inch optical format.
Samples of the OX02C1S GS sensor are available now and will be in mass production in 2024.
Find out more at www.ovt.com.
OX02C1S
Ordering Information
· OX02C1S-E56Y-001A-Z (RGB-Ir, lead-free) 56-pin a-CSPTM, rev 1A, packed in tray without protective film version
Applications
· automotive – autonomous driving – driver monitor system
– occupant monitor system – in-cabin monitor system
Technical Specifications
· active array size: 1920 x 1280
· maximum image transfer rate: – 1920 x 1280: 90 fps
· power supply: – analog: 2.8V – digital: 1.2V – I/O pads: 1.8V
· output formats: linear output
· temperature range: – operating: -40°C to +105°C sensor ambient temperature and -40°C to +125°C junction temperature
· lens size: 1/3.52″
· lens chief ray angle: 19.52°
· scan mode: progressive
· pixel size: 2.2 µm x 2.2 µm
· image area: 4259.2 µm x 2851.2 µm
Product Features
· support for image size: 1920 x 1280 and any cropped size
· high speed serial data transfer with MIPI CSI-2 (4/2-lane D-PHY)
· data format: RAW RGB-Ir
· parallel 10-bit DVP output
· 2.2 µm x 2.2 µm pixel with PureCel®Plus-S, Global Shutter, and Nyxel® technologies
· image sensor processor functions: – defective pixel cancellation – automatic black level correction, etc.
· dedicated safety features for supporting ASIL-B applications
· SCCB for register programming
· external frame synchronization capability
· embedded temperature sensor
· embedded supply voltage monitor
· one time programmable (OTP) memory
row select FIFO MIPI/DVP
Functional Block Diagram
image sensor core
image array
temp sensor
temp sensor
column ADCs
BLC, DigGain
analog gain control
OX02C1S
image signal processing
white balance gain, automatic exposure/
gain control, DPC (OTP+Dyn), window
output interface
MIPI DVP
security IP
PLL1 PLL2
timing generator and system control
OTP (sensor)
voltage monitor
OTP (crypto)
SCCB interface
XCLK FSIN XSHUTDN
TM GPIO[1:0]
VSYNC INTR
VMERRB 2.8V 1.8V 1.2V SID SCL SDA
Version 1.1, June 2023
4275 Burton Drive Santa Clara, CA 95054 USA
Tel: + 1 408 567 3000 Fax: + 1 408 567 3001 www.ovt.com
OMNIVISION reserves the right to make changes to their products or to discontinue any product or service without further notice. OMNIVISION, the OMNIVISION logo, PureCel, OmniPixel, and Nyxel are registered trademarks of OmniVision Technologies, Inc. a-CSP is a trademark of OmniVision Technologies, Inc. All other trademarks are the property of their respective owners.
