2L Foam Portable Fire Extinguisher
Product Information: Portable Fire Extinguisher, 2 L Foam
The Portable Fire Extinguisher, 2 L Foam is a high-quality
product suitable for use in putting out fires. It is certified
according to the directive for pressure equipment PED 2014/68/EU.
The product is approved/certified by Bureau on fire involving
electrical voltages. It has a fire rating of AB F 13 55 25 and a
nominal charge of ~3.9 Kg (with bracket). The extinguishing agent
used is foam, and the propellant temperature range is set between
20 and 26 bar. The product comes with a safety device and safety
pin for safe and easy usage. The cylinder material is made of alloy
steel and has been sandblasted and powder painted red Ral 3000
colour with plastic coating for external/internal treatment. The
product comes with a packaging standard of minimum 8 pieces, with a
maximum of 256 pieces for pallet (32 boxes with 8 pieces for each
one).
Product Usage Instructions
Using the Portable Fire Extinguisher, 2 L Foam is easy. Follow
the instructions below:
- Remove the safety pin from the extinguisher.
- Aim the nozzle at the base of the fire.
- Squeeze the lever slowly to release the foam extinguishing
agent. - Sweep the nozzle from side to side until the fire is completely
out. - After use, dispose of the product according to the transport
disposal guidelines mentioned in the user manual.
Note: The product image in the user manual is for illustrative
purposes only. The actual product purchased may have some
differences. For any spare parts or components, refer to the
components and spare parts list table in the user manual.
Reproduction of any content from the user manual is prohibited.
Use and Maintenance Technical Manual
Biogenesis S.r.l. www.bio-genesis.it
Portable Fire Extinguisher, 2 L Foam
REPRODUCTION IS PROHIBITED
· CYLINDER In high-strength alloy steel, deep drawing, external powder painting Red Ral 3000.
· EXTINGUISHING AGENT Water-based foam.
· PROPELLANT Dehumidified air or nitrogen (N2).
· VALVE M. 30×1.5, brass body, levers with red painting Ral 3000.
· USE A B F fire rating (solid materials, flammable liquids, cooking oils).
Note: image is for illustrative purpose only, the product purchased can has some difference
2 L foam fire extinguisher, temperature range from 0°C to +60°C, manufactured in accordance to UNI EN 3-7,
(D.M. 7.1.2005), certified according to the directive for pressure equipment PED 2014/68/EU.
Quality Product Suitable for use
certification guaranteed by Bureau on fire involving electrical voltages
uVpertiota1s.0It0a0liaV.,
at
a
minimum
distance
of
1
meter.
APPROVED/CERTIFIED FIRE EXTINGUISHER:
For MED 2014/90/UE version:
cod. 27021
FIRE RATING :
AB F
13 55 25
Portable Fire Extinguisher, 2 L Foam
TECHNICAL SPECIFICATIONS
FIRE RATING
EXTINGUISHING AGENT
PROPELLANT TEMPERATURE RANGE NOMINAL CHARGE FULL WEIGHT
DIMENSIONS
DISCHARGE TIME VALVE TIGHTENING TORQUE CYLINDER PRESSURE TEST CYLINDER VOLUME SAFETY DEVICE CYLINDER MATERIAL
EXTERNAL /INTERNAL TREATMENT
13 A 55 B 25 F Foam EWAB15 (2 % SC-6 + 10 % Inilam AX + 88 % water) Dehumidified air or Nitrogen (N2), 15 bar at 20°C
0°C / +60°C 2 Liters
~ 3,9 Kg (with bracket) Height (base – valve) 370 +/- 5 mm Diameter (cylinder) 110 +/- 2 mm
~ 10,5 seconds Minimum 45 Nm, Maximum 68 Nm
PT 27 bar 2,4 L.
Set between 20 and 26 bar Alloy steel
Sandblast and powder painting, Red Ral 3000 colour / Plastic coating
PACKAGING
(Note: the packaging quantities and measurements are indicative and can be subject at changes)
STANDARD
Note: minimum 8 pieces Maximum nr. 256 pieces for pallet (32 boxes with 8 pieces for each one)
Pallet dimensions 100×120 cm
ON REQUEST: SINGLE PACKAGING – maximum 192 pieces on pallet 100×120
REPRODUCTION IS PROHIBITED
TRANSPORT DISPOSAL
Land transport : Exemption for the purposes of ADR disposal 594
Ship Transport : IMDG Code – UN 1044 class 2.2 Fire Extinguishers
Portable Fire Extinguisher, 2 L Foam
COMPONENTS AND SPARE PARTS LIST
2 1
1.8
1.7 1.9
1.5 1.4
1.1
1.2
5
1.3
1.6
3
4
7
6
REPRODUCTION IS PROHIBITED
Table 1
NUM. 1
1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8
DESCRIPTION
Valve M. 30×1.5 O-ring valve Valve stem
Internal spring of the valve Tamper seal (red)
Test valve for pressure gauge Dip tube holder Safety device Safety pin
NUM. 1.9 2
3 4 5 6 7
DESCRIPTION
Dispensing horn Safety pin seal (green)
PVC dip tube Cylinder
Pressure gauge Bracket Label
Foam refill (1 L. bottle, ready to use)
The spare part at number 1 includes already all others components indicated from 1.1 to 1.9 “n.a.” mean that the component is not available as single spare part
