SC1001-0715-0 Inversion Table Storage Caddy
Product Information: Inversion Table Storage Caddy
The Inversion Table Storage Caddy is a handy accessory that
allows users to keep personal items such as water bottles, keys,
phones, or eyeglasses within reach while using the Teeter Inversion
Table. It can be easily assembled and installed on the left or
right rear side of the A-frame.
The Storage Caddy is designed specifically for use with Teeter
Inversion Tables and is a registered trademark of Teeter. Please
note that specifications are subject to change without notice.
Product Usage Instructions
1. Begin by assembling the Storage Caddy by attaching the hook
to the notch as shown in Figure 1 of the user manual.
2. Once assembled, the Storage Caddy can be installed on the
LEFT or RIGHT rear side of the A-frame of your Teeter Inversion
Table.
3. To install on the LEFT side, align the hook with the hole on
the left rear side of the A-frame and push it in until it clicks
into place.
4. To install on the RIGHT side, align the hook with the hole on
the right rear side of the A-frame and push it in until it clicks
into place as shown in Figure 2 of the user manual.
5. Once installed, you can use the Storage Caddy to keep your
personal items within reach while using your Teeter Inversion
Table.
6. Always ensure that your personal items are securely placed in
the Storage Caddy to prevent them from falling during inversion
therapy.
7. When not in use, remove the Storage Caddy from your Teeter
Inversion Table and store it in a safe place.
Note: Always read and follow the instructions provided with your
Teeter Inversion Table before use.
Assembly & User Instructions
Inversion Table Storage Caddy
! WARNING
· DO NOT place heavy objects or rest your body weight on product. · DO NOT insert uncovered cups of hot liquid if the liquid spills, you could be burned.
With the Storage Caddy, you can keep personal items like your water bottle, keys, phone or eyeglasses within reach while using your Teeter Inversion Table!
FIGURE 1
HOOK
How to Assemble
· On the LEFT outside of the inversion table A-frame, with the logo on the Storage Caddy facing outwards, seat the hook notch over the bolt that joins the Spreader Arm and FRONT A-frame leg (Figure 1).
· Gently press down so that the entire Storage Caddy hook is resting on the Spreader Arm (Figure 2).
· Check that the Storage Caddy is stable and installed on the outside of the A-frame so that it does not interfere with the operation of the inversion table.
· Before folding the inversion table for storage, remove the Storage Caddy to allow the Spreader Arms to fold up.
Teeter and Teeter logo are registered trademarks of Teeter. Specifications subject to change without notice. EN
© COPYRIGHT 2015 Teeter. International Law Prohibits Any Copying. SC1001 0715-0
NOTCH
Alternatively, the Storage Caddy can be installed on the RIGHT, REAR side of the A-frame.
FIGURE 2
