V1 Tent Clamp
USER MANUAL
Tent Clamp
Product code: 75160/75161
The Tent Clamp is a load-bearing element in the entertainment
technology that is intended for professional use. It is designed to
be used only on keder track aluminum profiles and any other use is
considered non-intended and incorrect use. The purpose of this user
manual is to provide instructions for the correct and safe use of
this product.
Table of Contents
- 2. Safety
- 7. Disposal
- 8. Compliance
Safety
Warnings and Safety Instructions:
- Read and follow the instructions in this user manual before
installing, operating or servicing this product. - Non-observance of the instructions in this user manual may
result in serious injuries and damage of property.
Requirements for the User:
- Check the contents of the box after unpacking. If any parts are
missing or damaged, contact your Highlite International
dealer. - Store the user manual at an easily accessible location for
future reference as it is an integral part of the product.
Disposal
The Tent Clamp should be disposed of according to local
regulations and environmental laws.
Compliance
The manufacturer and its authorized service providers are not
liable for any injury, damage, direct or indirect loss,
consequential or economic loss or any other loss arising from the
use of, or inability to use or reliance on the information
contained in this document.
Installation and Usage Instructions
- Ensure that the Tent Clamp is being used only on keder track
aluminum profiles. Any other use is considered non-intended and
incorrect use. - Follow the instructions in this user manual for correct and
safe installation and usage of the product. - If any parts are missing or damaged, contact your Highlite
International dealer before using the product. - Store the user manual at an easily accessible location for
future reference as it is an integral part of the product. - Dispose of the Tent Clamp according to local regulations and
environmental laws.
USER MANUAL
ENGLISH
Tent Clamp
V1
Product code: 75160/75161
Highlite International B.V. Vestastraat 2 6468 EX Kerkrade the Netherlands
Tent Clamp
Preface
Thank you for purchasing this Showgear product.
The purpose of this user manual is to provide instructions for the correct and safe use of this product.
Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
This user manual contains information concerning:
Safety instructions Installation and operation of the device Intended and non-intended use of the device Maintenance procedures Troubleshooting Transport, storage and disposal of the device
Non-observance of the instructions in this user manual may result in serious injuries and damage of property.
©2022 Showgear. All rights reserved.
No part of this document may be copied, published or otherwise reproduced without the prior written consent of Highlite International.
Design and product specifications are subject to change without prior notice.
For the latest version of this document or other language versions, please visit our website www.highlite.com or contact us at [email protected].
Highlite International and its authorized service providers are not liable for any injury, damage, direct or indirect loss, consequential or economic loss or any other loss arising from the use of, or inability to use or reliance on the information contained in this document.
Product code: 75160/75161
1
Tent Clamp
Table of contents
1. Introduction……………………………………………………………………………………………………………………………………….3 Before Using the Product ………………………………………………………………………………………………………………….3 Intended Use …………………………………………………………………………………………………………………………………….3 Text Conventions ………………………………………………………………………………………………………………………………3 Symbols and Signal Words………………………………………………………………………………………………………………..3
2. Safety ………………………………………………………………………………………………………………………………………………..4 Warnings and Safety Instructions ……………………………………………………………………………………………………..4 Requirements for the User…………………………………………………………………………………………………………………4
3. Description of the Device …………………………………………………………………………………………………………………..5 Overview …………………………………………………………………………………………………………………………………………..5 Product Specifications ……………………………………………………………………………………………………………………..5 Dimensions ………………………………………………………………………………………………………………………………………..6
4. Installation …………………………………………………………………………………………………………………………………………6 Safety Instructions for Installation ……………………………………………………………………………………………………..6 Personal Protective Equipment ………………………………………………………………………………………………………..6 Mounting ………………………………………………………………………………………………………………………………………….. 7 Working Load Limit …………………………………………………………………………………………………………………..9
5. Inspection and Maintenance …………………………………………………………………………………………………………….9 Inspection …………………………………………………………………………………………………………………………………………9 Corrective Maintenance ………………………………………………………………………………………………………………..10 Basic Cleaning Instructions ……………………………………………………………………………………………………………..10
6. Deinstallation, Transportation and Storage ……………………………………………………………………………………….10 Instructions for Deinstallation…………………………………………………………………………………………………………..10 Instructions for Transportation …………………………………………………………………………………………………………10 Storage ……………………………………………………………………………………………………………………………………………10
7. Disposal …………………………………………………………………………………………………………………………………………..10
8. Compliance …………………………………………………………………………………………………………………………………….10
Product code: 75160/75161
2
Tent Clamp
1. Introduction
Before Using the Product
Important Read and follow the instructions in this user manual before installing, operating or servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes:
Showgear Tent Clamp User manual
Fig. 01
Intended Use
This device is intended for professional use as load-bearing element in the entertainment technology. It shall be used only on keder track aluminum profiles. Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Text Conventions
Throughout the user manual the following text conventions are used:
References:
0255: Notes:
References to chapters and parts of the device are in bold lettering, for example: “Refer to 2. Safety”, “turn the adjustment screw (02)” Defines a range of values Note: (in bold lettering) is followed by useful information or tips
Symbols and Signal Words
Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual.
DANGER
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
Attention
Indicates important information for the correct operation and use of the product.
Important Read and observe the instructions in this document.
Product code: 75160/75161
3
Tent Clamp
2. Safety
Important Read and follow the instructions in this user manual before installing, using or servicing this product.
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual.
Warnings and Safety Instructions
WARNING Incorrect installation can cause serious injuries and damage of property.
This product may be installed only by instructed or skilled persons.
Do not exceed the working load limit (WLL) as indicated on the device and in this user manual. When the device is used together with other accessories, make sure that the working load limit (WLL)
of each component is not exceeded.
Attention For professional use only This device shall be used only for the purposes it is designed for.
This device is intended for professional use as a load-bearing element in the entertainment technology. It shall be used on keder track aluminum profiles. Any incorrect use may lead to hazardous situations and result in injuries and material damage.
Do not use the device on aluminum profiles with parameters different from those indicated in this user manual.
Do not modify the device. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.
Use the device only in environments with an ambient temperature between -20 °C and 60 °C.
Attention Before every use, examine the device visually for any defects
Follow the inspection schedule established for the site. Check the device for damage, cracks and corrosion. If any fault is found, mark the device clearly
and remove it from service. Do not use the device if it is damaged.
Requirements for the User
DANGER This product may not be used by ordinary persons.
This product may be used only by instructed or skilled persons. Installation and maintenance may be carried out by instructed or skilled persons. Service shall be carried out only by skilled persons. Contact your Highlite International dealer for more information.
Product code: 75160/75161
4
Tent Clamp
Instructed persons have been instructed and trained by a skilled person, or are supervised by a skilled person, for specific tasks and work activities associated with the installation, service and maintenance of this product, so that they can identify risks and take precautions to avoid them.
Skilled persons have training or experience, which enables them to recognize risks and to avoid hazards associated with the installation, service and maintenance of this product.
Ordinary persons are all persons other than instructed persons and skilled persons. Ordinary persons include not only users of the product but also any other persons that may have access to the device or who may be in the vicinity of the device.
3. Description of the Device
The Tent Clamp is an adjustable clamp, suitable for use with keder track aluminum profiles (50100 mm). It is available in two colors: silver (75160) and black (75161).
Overview
Safety hole 5 x mounting threads (2 x M10, 2 x M12, 1 x M14) See 4.3.1. Working Load Limit on page 9 Handle nut Clamp arm Clamp arm
Product Specifications
Model:
Physical: Dimensions: Weight:
Mechanical: Keder track profile size: Thread: WLL:
Construction: Material: Color:
Thermal: Ambient temperature ta:
Tent Clamp
171 x 150 x 56 mm (LxWxH) 1,4 kg
50100 mm M10, M12, M14 30100 kg
Metal Silver (75160), Black (75161)
From -20 °C to 60 °C
Product code: 75160/75161
5
Fig. 02
Tent Clamp Dimensions
4. Installation
Safety Instructions for Installation
Fig. 03
WARNING Incorrect installation can cause serious injuries and damage of property.
Installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing.
Personal Protective Equipment
During installation and rigging wear personal protective equipment in compliance with the national and site-specific regulations.
Product code: 75160/75161
6
Tent Clamp
Mounting
CAUTION Restrict the access under the work area during installation/deinstallation.
Attention Do not use brute force when loosening or tightening the handle nut.
To mount the device, follow the steps below: Turn the handle nut (03) counterclockwise until both clamp arms (04/05) fit in the grooves of the keder track aluminum profile (Fig. 04). Turn the handle nut (03) clockwise until the device is mounted firmly in position (Fig. 05).
Fig. 04
Fig. 05
Secure the device with a secondary suspension, for example a safety cable, rope or a chain. Put the secondary suspension through the safety hole (01).
Product code: 75160/75161
7
Tent Clamp
Use a clamp or an eye bolt to attach the load to one of the 5 x mounting threads (02). See 4.3.1. Working Load Limit on page 9 for more information.
Product code: 75160/75161
8
Fig. 06
Tent Clamp
Working Load Limit
Attention Make sure that the load capacity of the supporting structure is sufficient before attaching a load to the device.
Follow all applicable European, national and local safety regulations concerning installation of equipment over persons.
The device shall be installed in a horizontal orientation.
The WLL (Working Load Limit) of the device depends on which of the 5 x mounting threads (02) the load is attached to. See Fig. 07.
Fig. 07
5. Inspection and Maintenance
Attention Inspection and maintenance may be carried out only by instructed or skilled persons. Service shall be carried out only by skilled persons.
Inspection
Attention Before every use, examine the device visually for any defects
Regular and periodic inspections shall be carried out throughout the period of service of the device. The frequency of the inspections depends on the inspection schedule established for the site where the device is installed. Check the device for damage, cracks and corrosion. If any fault is found, mark the device clearly
and remove it from service. Do not use the device if it is damaged.
Product code: 75160/75161
9
Tent Clamp
Corrective Maintenance
Do not modify the device. Refer repairs and servicing to skilled persons. Contact your Highlite International dealer for more
information.
Basic Cleaning Instructions
Use a damp cloth to clean the device. Do not use alcohol, solvents or abrasive agents.
6. Deinstallation, Transportation and Storage
Instructions for Deinstallation
WARNING Incorrect deinstallation can cause serious injuries and damage of property.
Restrict the access under the working area during deinstallation. Always observe the national and site-specific regulations during deinstallation of the device. Wear personal protective equipment in compliance with the national and site-specific regulations.
Instructions for Transportation
Make sure that appropriate measures are taken to prevent damage to the device during transportation.
Storage
Inspect the device for defects before storing. See 5.1. Inspection on page 9 for more information. Clean the device before storing. Follow the cleaning instructions in chapter 5.3. Basic Cleaning
Instructions on page 10. Store the device in a dry, ventilated environment to avoid corrosion.
7. Disposal
After the device is removed from service it can be disposed of as scrap.
8. Compliance
Check the respective product page on the website of Highlite International (www.highlite.com) for an available declaration of conformity.
Product code: 75160/75161
10
©2022 Showgear
Highlite International | Event technology for professionals | Highlite.com
