Aquasana Aq-mf-1-r Under Sink Water Filter Owner's Manual (+ PDF)

AQ-MF-1-R
Under Sink Water Filter
Claryum®
Direct Connect
REPLACEMENT
Owner’s Manual
For use with AQ-MF-1

Contents hide

1 INSTALLATION STEPS

2 Documents / Resources

2.1 References

3 Related Posts

INSTALLATION STEPS

Turn off COLD water supply under the sink.
Remove the old filter from the system head. Rotate the filter to the left until it unlocks, pull down and discard.?
To attach new filter to the system, align all connection points, push in, and turn filter to the right until it locks.
NOTE: Do not use tools to tighten. Hand tighten only.
Once filter is locked into place, turn on the COLD water supply to pressurize the system. Check for leaks.
Turn on kitchen faucet to COLD water and run water through the system at least for at least 15 minutes. Once the system is flushed, turn off kitchen faucet.

NOTE: Do not drink flushed water.Scan to view the Claryum® Direct Connect replacement video.
https://qr1.be/O789

water for life®

Protect your investment and save money with our Water for Life® program.


Extended Warranty	Discounted Replacements	Free Shipping	No Contract

CONTACT US TO LEARN MORE 866-662-6885
[email protected]System certified by IAPMO R&T against NSF/ANSI Standards 42, 53, and 401 for the reduction of the claims specified on the Performance Data Sheet and at www.IAPMO.org.For the full list of contaminants filtered, scan to view the Performance Data Sheet on Aquasana.com.
https://qr1.be/HB4Q
The recommended replacement frequency for the AO-MF-1-R is every 6 months or every 784 gallons of use. Use only certified, genuine Aquasana replacement filters for continued contaminant removal and system performance.
Do not use with water that ismicrobiologically unsafe or of unknown quality without adequate disinfection before or after the system.