H1852-W80 Shelf Library Collection Steel
Product Information
The Shelf Library Collection is made of steel and is designed to
provide a versatile storage solution for your space. The collection
includes 3 Rail options, 7 Shelf options, 11 Single Shelf option,
and 15 Hanger Shelf option. The parts included in the collection
are Rails, Screws, Shelves, Brackets, Bolts, Threaded Inserts, and
Hangers.
Rail Parts
- A Rail
- B Screw (x4 for 1084 rail and x5 for 1852 rail)
Shelf Parts
- A Shelf
- B Bracket (x2)
- C Bolt (x4)
- Threaded D Insert (x2)
- E Bolt (x1)
Single Shelf Parts
- A Shelf
- B Bracket (x2)
Hanger Shelf Parts
- A Shelf
- B Hanger (x1)
- C Bracket (x2)
- D Bolt (x4)
- Threaded E Insert (x2)
- F Bolt (x3)
Product Usage Instructions
Assembly Guide for Rails
- Place the first rail A on the desired position on the wall and
put the screw B into the wall through the top hole. Depending on
the wall type, pre-drilling and wall plug (not included) may be
required. Use the top hole as an anchor point and level the rail
straight. Then mark the screw hole with a pencil or a sharp tool on
the wall. The logo text should be on the bottom side. - Finish mounting the first rail by putting the screws B into the
marked position. Measure the distances for the second rail A, then
mount the second rail by repeating the same process. - To extend the system, repeat the same process for additional
rails.
Assembly Guide for Shelves
- Start by inserting bracket ends B into the holes on the shelf
A. - Place the shelf at a desired position in the rail and secure
the bracket B to the rail by fastening the bolts C to the threaded
hole in the rail. Note that the back side of the shelf should be
placed against the rail, not to the wall.
Assembly Guide for Single Shelves
- Start by inserting bracket ends B into the holes on the shelf
A. - Make sure that the brackets are placed on the correct side.
Place the complete shelf against the wall, level it straight, and
then mark screw holes with a pencil or a sharp tool on the
wall. - Put screws into the marked position on the wall, then hang the
bracket on. Depending on the wall type, pre-drilling and wall plug
(not included) may be required.
Assembly Guide for Hanger Shelves
- Screw the hanger bolts F into the hanger B through the shelf
A. - Insert bracket ends C into the holes on the shelf A.
- Place the shelf at a desired position in the rail and secure
the bracket C to the rail by fastening the bolts D to the threaded
hole in the rail. Note that the back side of the shelf should be
placed against the rail, not to the wall.
For detailed care and maintenance instructions for FRAMA
products, you can scan the QR code using your mobile device or
access the guide on your desktop at
framacph.com/pages/material-care-guide.
For any further assistance or inquiries, please contact FRAMA at
Fredericiagade 57, 1310 Copenhagen K or call +45 3140 6030. You can
also visit their website at framacph.com.
– ASSEMBLY GUIDE –
SHELF LIBRARY COLLECTION
Steel
INDEX
3 Rail 7 Shelf 11 Single shelf 15 Hanger shelf
RAIL
– PARTS –
A Rail
B Screw
x4 for 1084 rail x5 for 1852 rail
3
1. Place the first rail A on the desired position on the wall and put the screw B
into the wall through the top hole. Depends on the wall type, pre-drilling and wall plug (not included) maybe required.
Use the the top hole as an achor point and level the rail straight then mark the screw hole with a pencil or a sharp tool on the wall.
Anchor point
The logo text should be on the bottom side
4
2.
Finish mounting the first rail by putting the screws B into the marked position. Measure the distances for the second rail A , then mount the second rail by repeating the same process on page 4.
Inner distance between the rails
40 cm shelf = 38.4 cm
5
60 cm shelf = 58.4 cm
80 cm shelf = 78.4 cm
3. To extend the system, repeat the same process on page 4 and 5.
6
SHELF
– PARTS –
A Shelf x1
B Bracket x2
7
C Bolt x4
Threaded
D insert x2
Spacing
E bolt x1
Only A , B , C are required for this assembly.
1. Start by inserting bracket ends B into the holes on the shelf A .
Front
Back
8
2. Place the shelf at a desired position in the rail, secure the bracket B to the rail by
fastening the bolts C to the threaded hole in the rail.
9
3. Note that the back side of the shelf should be placed
against the rail not to the wall.
10
SINGLE SHELF
– PARTS –
A Shelf x1
B Bracket x2
11
1. Start by inserting bracket ends B into the holes on the shelf A .
Front
Back
12
2. Make sure that the brackets are placed correct side. Place the complete shelf against the wall, level it straight then mark screw holes
with a pencil or a sharp tool on the wall.
Front
13
3. Put screws into the marked position on the wall, then hang the bracket on. Depends on the wall type, pre-drilling and wall plug (not included) maybe
required.
14
HANGER SHELF
– PARTS –
A Shelf x1
B Hanger x1
C Bracket x2
D Bolt x4
Threaded
E insert x2
Hanger / Spacing
F bolt x3
15
Only A , B , C , D , F are required for this assembly.
1. Start by screwing the hanger bolts F into the hanger B though the shelf A .
16
2. Insert bracket ends C into the holes on the shelf A .
Front
Back
17
3. Place the shelf at a desired position in the rail, secure the bracket C to the rail by
fastening the bolts D to the threaded hole in the rail.
18
20
4. Note that the back side of the shelf should be placed
against the rail not to the wall.
19
– Care & Maintenance Guide –
In order to preserve your new FRAMA pieces for years to come, we’ve produced a guide on the materials we use and how to best care for them. Following these instructions will help to maintain the
appearance and quality of your items after repeated use and cleaning.
For material care and maintenance instructions, scan the QR code using your mobile device.
Access the guide on your desktop at framacph.com/pages/material-care-guide
FRAMA Fredericiagade 57, 1310 Copenhagen K +45 3140 6030 framacph.com
FRAMA Official Site | Lifestyle Objects for the Home
