V8 Animal Cordless Stick Vacuum Cleaner – 220-240 V AC
Product Information:
The Dyson V8 is a cordless vacuum cleaner that comes with a bin,
wand, and cleaner head. It includes various tools and accessories
to provide versatile cleaning options. The vacuum cleaner is
equipped with a motorized brush bar, suction control slider, and a
range of attachments for different cleaning needs.
Contents in the box:
- Main body with handle and bin attached
- Brush bar located inside the cleaner head
- Suction control slider located on the front
- Rectangular dock for wall mounting
- Charger with plug and cable
- Soft fluffy brush bar housed within the cleaner head
- Narrow connector end for bin attachment
- Wider end for cleaner head or tool attachment
- Additional tools may be purchased separately
Product Usage Instructions:
To start cleaning, pull the trigger on the vacuum cleaner.
Connecting the Wand:
Follow the diagram below to connect the wand onto the main
body:
Caring for your Floors:
- Charging your machine: Use the charger to charge the vacuum
with or without the dock. - Emptying your bin: Remove the bin from the main body and empty
its contents. - Cleaning your bin: Wash the bin to keep it clean and free from
debris. - Clearing blockages: If there are any blockages, follow the
instructions to clear them. - Washing filter A: Clean filter A using the recommended
method. - Washing filter B: Clean filter B using the recommended
method.
Cleaning Tools:
- Clearing obstructions from your MotorbarTM cleaner head
- Clearing blockages from your Hair screw tool
- Washing your FluffyTM cleaner head brush bar
- Cleaning your tools
Looking after your machine:
Follow the recommended instructions to maintain and care for
your Dyson V8 vacuum cleaner.
Note: For detailed instructions on using specific tools and
attachments, please refer to the user manual.
SV12 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01
User manual
Dyson V8 logo
The Dyson machine with the bin, wand and cleaner head.
Contents In the box Getting started Caring for your floors Charging your machine Emptying your bin Cleaning your bin Clearing blockages Washing filter A
Washing filter B Clearing obstructions from your MotorbarTMcleaner head Clearing blockages from your Hair screw tool Washing your FluffyTMcleaner head brush bar Cleaning your tools Looking after your machine
In the box
Your machine will come with one or more of these cleaner heads not all will be included.
A brush bar located inside the cleaner head and a suction control slider located on the front.
Main body showing the handle and bin attached.
A soft fluffy brush bar housed within the cleaner head. There is an electrical connecter end that can attach to the end of the wand or directly to the machine.
Vacuum cleaner
A rectangular dock that needs to be fixed to a wall with screws.
MotorbarTMcleaner head
De-tangling vanes
automatically clear
wrapped hair from the
The charger is a one
brush bar as you clean.
piece unit with the plug,
connector end and cable.
FluffyTMcleaner head Soft woven nylon removes large debris, while anti-static carbon fiber filaments extract fine dust from hard floors.
The narrow connector end at the top, this connects to the bin and the wider end at the bottom that connects to the cleaner head or tool.
Wall dock The Dyson cordless vacuum drops into the wall-mounted charging dock, ready for your next clean.
Charger Charges your vacuum with or without a dock.
Wand
Some tools may not be included.
You can buy additional tools at www.dyson.com.
This tool has a combination of brush head and crevice tool together in one unit. The brush head slides down the crevice tool when needed.
A long tool with an angled end.
A small cleaner head with an angled body housing the motor and an electrical connector to attach to the wand or directly to the machine.
Combination tool Two tools in one wide nozzle and brush, for quick switching between cleaning and dusting tasks around your home or car.
Crevice tool Engineered for precise cleaning around tricky edges and into hard-toreach narrow spaces.
A flexible hose engineered from tough wire and durable plastic.
Hair screw tool De-tangling conical brush bar spirals hair off and into the bin. Motor-driven cleaning for smaller spaces.
A wide,
triangular
shaped Fabric and nozzle. mattress tool
Extension hose Adds up to 24 in of
Removes dust, dirt
flexible reach to any tool
and allergens from
attachment, to clean up
mattresses and
high or down low in your
upholstery.
home or car.
A small cleaner head
with a body housing the
motor and an electrical
connector to attach to Pliable bristles and
the wand or directly to felt bumper strip on
the machine.
a narrow, tapered tool.
Mini motorized tool Motorized brush bar, concentrated in a smaller head to remove stubborn dirt from mattresses, upholstery and stairs.
Soft dusting brush Enclosed in a skirt of soft nylon bristles for gentle, vacuumassisted dusting of delicate objects and surfaces.
A short nozzle with stiff bristles on the underside.
Stubborn dirt brush Stiff nylon bristles dislodge ground-in dirt from coarse carpets, high traffic areas and car interiors.
Getting started
Pull trigger to start cleaning
Two power modes Toggle between Powerful mode for longer suction and MAX mode, for stronger suction. Just hold down the trigger and slide the control back and forth.
click
Diagram showing the connection of the wand onto the main body, with the wand release button aligned with the top of the main body.
The power mode button is located on the top of the machine between the bin and filter. Slide to the left for powerful cleaning and to the right for max mode.
Switch accessories quickly The quick-release tools click into place, and release in moments by simply depressing the release switch.
click
A brush bar located inside the cleaner head and a suction control slider located on the front. MotorbarTMcleaner head De-tangling vanes automatically clear wrapped hair from the brush bar as you clean.
Clean awkward spaces Remove the wand and connect your chosen tool directly to the inlet pipe to use the vacuum as a handheld.
Pointers to demonstrate that the tools can be connected directly to the main body or to the end of the wand.
Caring for your floors
Check that the underside of the cleaner head or tool is clean and free from any objects that may cause damage.
Before vacuuming your flooring, rugs, and carpets, check the manufacturer’s recommended cleaning instructions.
The brush bar on your machine can damage certain flooring. Some rug materials may fuzz if a rotating brush bar is used when vacuuming. If this happens, we recommend vacuuming without the motorized floor tool and consulting with your flooring manufacturer.
Charging your machine
Insert the charging cable into the charging point at the back of the vacuum, at the bottom of the handle. Plug the cable into a wall socket to begin charging.
Fully charge your machine before your first use. Connect to charger either directly or in the dock.
A full charge will take approximately 4.5 hours. While your battery is charging, the LEDs will flash with the current level of charge. These lights will turn off once your machine is fully charged.
The charger connected from the power supply using the wall dock.
click
Battery LEDs During use, high charge. During use, medium charge. During use, low charge. Empty.
Charging LEDs Charging, low charge. Charging, medium charge. Charging, nearly full. Fully charged. Battery fault. Charger fault.
All LEDs lit with a solid blue light. Two LEDs lit with a solid blue light.
One LED lit with a solid blue light.
One blue LED flashing.
One flashing blue light on the side of the battery.
Two flashing blue lights on the side of the battery.
Three flashing blue lights on the side of the battery.
No lights illuminated on the side of the battery.
One flashing red LED.
One light flashing alternately red and blue.
The LED lights are located on the side of the battery unit.
44..5 hrs
Emptying your bin
Empty as soon as the dirt reaches the MAX level don’t overfill. Using your machine when the dirt is above the MAX line may affect the performance and require more frequent filter washing.
The MAX mark on the bin of the machine, showing that the dirt should not be filled over the Max mark when the machine is at the angle of normal use.
Release the dirt Remove the wand from your machine. Hold your machine over the bin and pull the bin release catch upwards. The cyclone will slide up and the bin base will open.
Minimize dust contact Cover your bin tightly in a dustproof bag while you empty. Remove the bin carefully, seal the bag tightly and dispose.
Close the bin Push down on the cyclone until it slides into position. Push the bin base upwards until it closes securely.
The bin release catch is located on the top of the cyclone where it joins the main body of your machine.
cclilcikk
Cleaning your bin
Empty your bin as soon as the dirt reaches the MAX mark. You may need to clean the filter more often if you use your machine with a full bin.
Empty your bin Remove the wand from your machine. Hold your machine over a bin and pull the bin release catch upwards. The cyclone will slide up and the bin base will open.
Remove the cyclone Pull the bin release catch upwards. The cyclone will slide up and the bin base will open. Locate the cyclone release button behind the cyclone and push to remove the cyclone from your machine.
Remove the bin Pull back on the red catch located on the base, slide the bin down and pull it off your machine.
Clean the bin Wipe your bin with a damp, lint-free cloth. Don’t put the bin in a dishwasher or use detergents, polishes or air fresheners. Make sure the bin is completely dry before replacing.
Replace the bin Align the tabs on the bin with the grooves on the main body and slide it upwards until it clicks into place.
Replace the cyclone Slide the cyclone into the grooves of the main body and push down until it is in position. Push the bin base up until it clicks firmly shut.
1
The cyclone release
button is located on
the main body and is
visible once the bin
release button has
2
been activated. The button to remove the
bin is located on the
bottom of the handle.
1
2 1
3
Clearing blockages
Your machine is fitted with an automatic cut-out. If any part of it is blocked, your machine’s motor will pulse and won’t function until the blockage has been cleared.
Disconnect your machine from the charger before looking for blockages. Be careful not to touch the trigger and be aware of sharp objects. Leave your machine to cool down before looking for blockages. Don’t use your machine when looking for blockages as this could cause injury.
With the wand removed from the machine, check for blockages at both ends of the wand.
Washing filter A
Remove your filter Lift the filter out of the top of the cyclone. Tap to remove excess dust and debris.
The filter has a top with five arms that fit onto the cyclone body.
Wash your filter Hold the open end of the filter under a running tap, until the water runs clear.
Turn the filter upside down and tap it to remove excess water.
Run water over the outside of the filter until the water runs clear.
Squeeze and twist with both hands to make sure the excess water is removed.
Dry your filter Leave your filter to dry for at least 24 hours in a well-ventilated, warm place.
Do not dry your filter in a tumble-dryer or near a naked flame.
Important: your filter must be completely dry before you put it back into the machine. Your machine could be damaged if used with a damp filter.
Reassemble your machine Align the arrow on the top of the filter with the bin release button.
Push down to fit securely in place.
The filter will only fit correctly if the arms are aligned and the arrow on the top is pointing towards the main body of the machine.
Washing filter B
Twist off your filter Twist your filter counter-clockwise and pull it away from your machine.
Wash your filter Wash the inside of the filter under cold, running water, rotating the filter to make sure all the inside is clean. Repeat until the water runs clear. Shake out the water Empty the filter and shake firmly to remove excess water. Keep shaking it until there’s no water coming from the filter.
Dry your filter Place your filter, with the open end facing up, to dry. Leave your filter to dry for at least 24 hours in a well-ventilated, warm place. Do not dry your filter in a tumble-dryer or near a naked flame. Important: your filter must be completely dry before you put it back into the machine. Your machine could be damaged if used with a damp filter.
Reassemble your machine Place your filter on your machine, aligned in the open position. Twist clockwise until it clicks securely into position.
The filter is placed under the tap with the water flowing into the open end of the filter.
Clearing obstructions from your MotorbarTMcleaner head
Your MotorbarTMcleaner head doesn’t have a washable brush bar. To maintain optimum performance, check your brush bar regularly and clear any obstructions. Make sure your machine is disconnected from the charger and take care not to touch the trigger.
Remove your brush bar Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Press the cleaner head release button on the end of the wand. Place the cleaner head upside down. Use a coin to unlock the end cap. Twist the end cap and remove it from your brush bar. Don’t wash the end cap. Slide your brush bar out of the cleaner head.
Look for obstructions Clear any debris from your brush bar. Check inside the cleaner head and remove any debris or blockages. Your MotorbarTMcleaner head and brush bar aren’t washable. Wipe over with a damp lint-free cloth.
Replace your brush bar Push the end cap back on to your brush bar and slide it back into the cleaner head. Turn the end cap clockwise into the locked position. Your cleaner head isn’t washable and should only be wiped over with a damp lint-free cloth.
The removal of the brush bars showing the lock in a horizontal position and the unlock symbol in the 6 o’clock position and the lock symbol in the 12 o’clock position.
The brush bar reinserted into the cleaner head and the end cap rotated to the locked position.
Clearing blockages from your Hair screw tool
Your Hair screw tool doesn’t have a washable brush bar. To maintain optimum performance, check your brush bar regularly and clear any obstructions.
Make sure your machine is disconnected from the charger and take care not to touch the trigger.
Remove the cover and brush bar Remove the Hair screw tool from the wand or machine. Push the base plate open. Press the red lever down to release the cleaner head cover. Pull the cleaner head cover off the main body of the tool.
Look for obstructions Pull your brush bar firmly to remove it from the main body. Check and remove any obstructions from all three parts of your Hair screw tool. Your Hair screw tool isn’t washable. Wipe over with a damp lint-free cloth. Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners.
The location of the lever to release the brush bar is located at the back of the Hair screw tool.
Reassemble Hair screw tool Put your brush bar back into position and press firmly until it clicks back into position.
Check the red locking lever is in the unlocked position. Align the cleaner head cover with the guide on the main body. Push it down until it clicks into position.
Push the red locking lever up until it clicks into position and push the base plate back into place.
Slide the housing back on to the brush bar and push the lever on the back of the Hair screw tool upwards to lock.
Washing your FluffyTM cleaner head brush bar
Your FluffyTMcleaner head has a washable brush bar. To maintain optimum performance, check and wash your brush bar regularly.
Make sure your machine is disconnected from the charger and take care not to touch the trigger.
Remove your brush bar Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners.
Press the cleaner head release button on the end of the wand. Place the cleaner head upside down.
Push the end cap up fully and pull the brush bar out of the cleaner head.
Remove the end cap from the brush bar. Don’t wash the end cap.
1
The end cap
is located at
the side of the
cleaner head.
2
Push this
upwards to
unlock the brush
bar. Don’t wash
the end cap.
Wash and dry your brush bar Hold your brush bar under running water and gently rub to remove any lint or dirt. Remove as much excess water as possible, run your hand down the length of the brush bar to squeeze out the water. Stand your brush bar upright, with the closed end at the top. Leave to dry completely for at least 24 hours.
Replace your brush bar Before replacing, check that your brush bar is completely dry. Reattach the end cap to your brush bar. Slide your brush bar into the cleaner head. Push the end cap back down to the closed position.
The two ends of the main brush bar showing the closed in end being the correct one to have facing upwards when leaving the brush bar to dry.
The end cap
3
should be
attached to the
cleaner head
at an angle less
than 90°, any
angle greater
than this will not 2
allow the end
cap to close.
The brush bar has an open end and a closed end. Stand upright, with the closed end facing upwards, to dry.
1
The brush bar reinserted into the cleaner head and the end cap rotated to the locked position.
Cleaning your tools
Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. Wipe with a damp, lint-free cloth, without touching the connector end. Make sure your tools are completely dry before using.
Combination tool
Crevice tool
Hair screw tool
Mini motorized tool
Soft dusting brush
Stubborn dirt brush
Fabric and mattress tool
Extension hose
Looking after your machine
To always get the best performance from your machine, it’s important to clean it regularly and check for blockages.
Look after your machine If your machine is dusty, wipe with a damp lint-free cloth. Check for blockages in the cleaner head, tools and main body of your machine. Wash your filter regularly and leave to dry completely. Don’t use detergents or polishes to clean your machine.
Look after your battery To get the best performance and life from your battery, use Powerful suction mode. Your machine won’t operate or charge if the ambient temperature is below 5°C (41°F). This is designed to protect both the motor and battery.
Your serial numbers You can register your machine using the serial number found on the bottom of your machine. You can find your serial numbers on your machine, battery and charger. Use your serial number to register.
Dyson vacuum cleaners, hair dryers and stylers, fans, humidifiers, hand dryers and lighting | Dyson
