Ryobi Ry40702 40v Hp Brushless 18 Inch Rear Tine Tiller User Guide

RY40702 40V HP Brushless 18 Inch Rear Tine Tiller

Product Information:

The product is a RY40702 model, which is a gardening tool
designed for tilling soil. It is powered by two 40V batteries and
features a motor and tines for efficient tilling. The product comes
with a handle, wire assembly, bull bar, ballast tank, wheels, side
panels, depth bar, depth bar handle, start key, start button, and a
bail.

Product Usage Instructions:

1. Install the handle by following the instructions on page 7 of
   the user manual.
2. Connect the wire assembly as described on page 7.
3. Install the bull bar using the provided wrench. Refer to page 7
   for detailed instructions.
4. Attach the ballast tank according to the instructions on page
   7.
5. Install the wheels by aligning the hole in each wheel with the
   corresponding hole on the axle. See page 7 for more details.
6. Install the side panel by following the instructions on page
   8.
7. Adjust the side panels as needed. Refer to page 8 for
   guidance.
8. Install at least two 40V batteries on either the left side
   (PAIR A) or the right side (PAIR B). Detailed instructions can be
   found on page 8.
9. Install the depth bar by following the instructions provided on
   page 8.
10. Attach the depth bar handle as described on page 8.
11. To start the unit, insert the start key with the arrow facing a
    pair of charged battery packs. See page 8 for more
    information.
12. Press and hold the start button, then pull the bail toward the
    handle. Release the start button when the motor and tines start
    operating. Detailed steps can be found on pages 8-9.

For additional information, product registration, or assistance
with operating and maintaining the product, please visit www.ryobitools.com or call
1-800-525-2579.

1 Install the handle (see page 7). 2 Connect wire assembly (see page 7).

3

Install the bull bar using the wrench provided (see page 7).

RY40702 QUICK REFERENCE GUIDE

WARNING:
This Quick Reference Guide is not a substitute for reading the operator’s manual. To reduce the risk of injury or death, user must read and understand operator’s manual before using this product. All page references refer to the operator’s manual.

FIRST TIME ASSEMBLY

STARTING THE UNIT

4 Attach ballast tank (see page 7).

7 Adjust side panels (see page 8).

1 Install at least two 40V batteries on either the left side (PAIR A) or the right side (PAIR B) (see page 8).

5 Install the wheels. Align the hole in the wheel with the hole farthest from the end of the axle (see page 7).

8 Install the depth bar (see page 8).

2 Insert the start key with the arrow facing a pair of charged battery packs (see page 8).

6 Install the side panel (see page 8).

9 Install depth bar handle (see page 8).

3 Press and hold the start button. Pull the bail toward the handle and release the start button when the motor and tines starts (see page 8-9).

Make the most of your purchase! Go to www.ryobitools.com and register your new tool online. For questions about operating or maintaining your product please call, 1-800-525-2579.

998000882 5-27-22 (REV:03)

References

• RYOBI DAYS ARE BACK! - RYOBI Tools