78190E Clean Safety Cross Bar
Product Information
The product is manufactured by Etac AB and is designed to
provide assistance with cleaning tasks. It is equipped with
assembly instructions and can be used for various cleaning
purposes.
Product Usage Instructions
- Before using the product, ensure that all parts are clean and
free from any dirt or debris. - Refer to the provided assembly instructions for proper setup
and configuration of the product. - Follow the recommended cleaning technique for the specific task
at hand. - For general cleaning, wet a cloth or sponge with water or a
suitable cleaning solution and apply it to the surface to be
cleaned. - Gently scrub the surface using the product, applying moderate
pressure as needed. - Rinse the cloth or sponge regularly and continue cleaning until
the desired result is achieved. - For stubborn stains, apply a stronger cleaning solution or use
the appropriate cleaning tool recommended for the surface. - After cleaning, rinse the product thoroughly and remove any
excess water or cleaning solution. - Store the product in a dry and clean place when not in
use.
For detailed information on specific cleaning tasks or
troubleshooting, refer to the full user manual provided with the
product.
Clean
Tvärslå Safety bar Sicherheitsbügel Item no 8020 9246
1
Monteringsanvisning / Assembly instructions / Montageanweisung 3
4a 2
4b
78190E
04-04-14 Etac AB, Box 203, SE-334 24 Anderstorp Tel. +46/371-58 73 00, Fax. +46/371-58 73 90
www.etac.se
Välkommen till Etac
