regalo 4200 DS Baby Basics Infant Changing Pad Instruction Manual
OPTION 1: USING WITH VELCRO MOUNTING PADS
For installing, remove sticker backing from velcro pads. With adhesive side facing down, press changing pad firmly on flat surface to secure. To remove, lift changing pad from surface. Velcro mounting pads will stay in place.
OPTION 2: USING WITHOUT VELCRO MOUNTING PADS
Dethatch velcro mounting pad from rubber pads. This will reduce changing pad from sliding on a flat surface.
INSTALLATION & USE INSTRUCTIONS
Position changing pad on center of flat surface. Lay baby on its back onto the center of pad. Secure belt around baby’s midsection. To secure, pull loose straps outward. Use pad only with minimum surface dimensions of 16 x 31.
FIBER CONTENT
WATER RESISTANT
Cover – 100% polyester
Filling -100% polyurethane foam
CARE INSTRUCTIONS
DO NOT MACHINE WASH
Hand wash only. Drip Dry. Do not iron.
WARNING
- Read all instructions before assembly and use of changing pad.
- Failure to follow these instructions for the assembly of use of your Changing Pad could result in serious injury or death.
- Never leave child unattended when using your changing pad.
- Always use enclosed restraint system when using this pad.
- Do not use if any part is missing, worn or damaged.
- Recommended weight limit for use up to 30 lbs.
- Keep instructions for future use.
- Adult assembly required.
- Always secure this unit to the support surface by attaching the velcro pads together. See instructions.
FALL HAZARD
- Children have suffered serious injuries after falling from changing tables. Falls can happen quickly.
- STAY in arm’s reach of your child.
- Always use restraint system when using this product.
SUFFOCATION HAZARD
- Babies have suffocated while sleeping on changing pads.
Changing pads are not designed for safe sleeping. - NEVER allow baby to sleep on changing pad.
