B02-F-A60 WiFi Smart LED Bulb
Product Information: SONOFF LED Smart Bulb
The SONOFF LED Smart Bulb is a LED bulb that allows users to
remotely control and adjust the brightness and color through a
smartphone app. It works under 220-240V AC only and has a rated
power of 7W. The bulb has a lamp screw base of E27 and comes in two
models – B02-F-A60 and B02-F-ST64, with different dimensions and
weight. It supports IEEE 802.11 b/g/n 2.4GHz Wi-Fi and is
compatible with Android and iOS operating systems. The bulb has a
CRI of 80 and a life expectancy of up to 15000 hours.
Features:
- Remote Control
- Single/Countdown Timing
- Voice Control
- Share Control
- Smart Scene
- Sync Status
- Stepless Dimming
- Scene Mode
- Camera Feature
- Group Control
- Factory Reset
Product Usage Instructions:
- Install the device: To avoid electric shock,
turn off the power before installing the device. The device works
under 220-240V AC only. - Download APP: Download the eWeLink app to your
AndroidTM or iOS device. - Power on: After powering on, the device will
enter quick pairing mode (Touch) during the first use. The device
enters the breathing mode. The device will exit the quick pairing
mode (Touch) if not paired within 3mins. If you want to enter this
mode, please press the manual switch three times repeatedly at an
interval of every 1s (Off-ON-Off-ON-Off-ON). The breathing mode
indicates the light enters quick pairing mode. - Add the device: To add the device, tap + and
select Quick Pairing, then operate following the prompt on the app.
WIFI devices can be added in this mode (make sure the device is in
pairing mode). GSM devices and devices with QR code can be added in
this mode. Add device in this mode if your device supports this
feature. - Compatible Pairing Mode: If you fail to enter
Quick Pairing Mode (Touch), press the light switch 5 times
repeatedly at an interval of every 1s
(Off-ON-Off-ON-Off-ON-Off-ON-Off-ON) when the light is on. The
quick flash indicates the device enters the compatible pairing
mode. Tap + and select Compatible Pairing Mode on APP. Select Wi-Fi
SSID with ITEAD-****** and enter the password 12345678, and then go
back to eWeLink APP and tap Next. Be patient until pairing
completes. - Usage: Power on the bulb, it will enter quick
pairing mode (The bulb change from bright to dim and cycle the
mode), after 10s, if power off, it will go solid and keep warm
light at the highest brightness. - Factory Reset: Press the light switch 3 times
repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON) when
the light is on. The breathing mode indicates the device enters the
quick pairing mode (Touch). Please reset the device to factory
defaults if you want to use other Wi-Fi networks, then reconnect
the network.
Common Problems:
If your device stays offline, please check if the Wi-Fi signal
is weak or the device is too far away from the router. Also, check
if the device has been added to the app and if the network
connection is normal.
SONOFF TECHNOLOGIES CO., LTD.
Operating Instruction
1. Install the device
English
OFF
To avoid electric shock, please turn off the power before installing the device. The device works under 220-240V AC only. 2. Download APP
eWeLink
3. Power on
eWeLink
AndroidTM & iOS
After powering on, the device will enter the quick pairing mode (Touch) during the first use. The device enters the “breathing mode”.
The device will exit the quick pairing mode (Touch) if not paired within 3mins. If you want to enter this mode, please press the manual switch three times repeatedly at an interval of every 1s (Off-ON-Off-ON-Off-ON). The “breathing mode” indicates the light enters quick pairing mode.
1S
1S
1S
1S
1S
5
SONOFF TECHNOLOGIES CO., LTD. 4.Add the device
English
AddDevice
QuickPairing
WIFIdevicescanbeaddedinthismo de(makesurethedeviceisinpairing mode).
Scan QR code
GSM devices and devices with QR co de can be added in this mode.
Sound Pairing Add device in this mode if your devic e support this feature.
Tap “+” and select ” Quick Pairing “, then operate following the prompt on the app.
Compatible Pairing Mode
If you fail to enter Quick Pairing Mode (Touch), please try “Compatible Pairing Mode ” to pair. 1. Press the light switch 5 times repeatedly at an interval of every 1s (Off-ON-Off-ON-
Off-ON-Off-ON-Off-ON) when the light is on. The “quick flash” indicates the device enters the compatible pairing mode. 2. Tap “+” and select ” Compatible Pairing Mode ” on APP. Select Wi-Fi SSID with ITEAD-****** and enter the password 12345678, and then go back to eWeLink APP and tap “Next”. Be patient until pairing completes.
Usage of being an ordinary bulb
Power on the bulb, it will enter quick pairing mode (The bulb change from bright to dim and cycle the mode), after 10s, if power off, it will go solid and keep warm light at the highest brightness.
6
SONOFF TECHNOLOGIES CO., LTD.
English
Specifications
Model Input Luminous Flux Color temperature Rated power Lamp base CRI Life Expectancy Wi-Fi Operating systems Dimension Weight
B02-F-A60/B02-F-ST64 220-240V AC 50Hz B02-F-A60: 806Lm / B02-F-ST64: 700Lm B02-F-A60: 2200K-6500K / B02-F-ST64: 1800K-5000K 7W E27 Ra80 15000h IEEE 802.11 b/g/n 2.4GHz Android & iOS B02-F-A60: 60x104mm / B02-F-ST64: 64x138mm B02-F-A60: 35g / B02-F-ST64: 50g
Product Introduction
Lampshade
E27 lamp screw base
B02-F-A60
B02-F-ST64
7
SONOFF TECHNOLOGIES CO., LTD.
English
Features
SONOFF LED is a LED smart bulb that allows users to adjust the brightness and color, and remotely turn on/off the connected devices via your smartphone, schedule it on/off and share it to your family to control together.
Remote Control Single/Countdown Timing
Voice Control
Share Control
Smart scene
Sync Status
Stepless dimming
Scene Mode
Camera Feature
Group control
Factory Reset
Press the light switch 3 times repeatedly at an interval of every 1s (Off-ON-Off-ONOff-ON) when the light is on. The “breathing mode” indicates the device enters the quick pairing mode (Touch).
1S
1S
1S
1S
1S
Please reset the device to factory defaults if you want to use other Wi-Fi networks, then reconnect the network.
Common Problems
Why my device stays “Offline”?
Maybe you have entered a wrong Wi-Fi password. Maybe there’s too much distance between the switch your router or the environment
causes interference, consider getting close to the router. If failed, please add it again. The 5G Wi-Fi network is not supported and only supports the 2.4GHz wireless network. Maybe the MAC address filtering is open. Please turn it off.
If none of the above methods solved the problem, you can open the mobile datanetwork on your phone to create a Wi-Fi hotspot, then add the device again.
8
