43191109 Decorative Rattan Look Planter
Product Information: 43191109 Decorative Rattan Look
Planter
The 43191109 Decorative Rattan Look Planter is a stylish and
durable planter that is perfect for both indoor and outdoor use.
The planter has a rattan look that adds a touch of elegance to any
space. It is made from high-quality materials that are
weather-resistant, ensuring that it will last for many years.
Part List:
- Ax8
- Bx2
- Cx1
Hardware List:
- 4x A screws
- 2x B screws
Product Usage Instructions:
Follow the steps below to assemble the 43191109 Decorative
Rattan Look Planter:
Step 1:
Attach part C to the base of the planter using 4x A screws.
Step 2:
Attach the side panels to the base using 2x A screws for each
panel. Do not fully tighten the screws during assembly.
Step 3:
Insert the remaining panels into the slots on the side
panels.
Step 4:
Attach the top panel to the side panels using 2x B screws on
each side. Fully tighten all screws after the final assembly
steps.
Your 43191109 Decorative Rattan Look Planter is now ready to
use. Place your favorite plants inside and enjoy!
Assembly Instructions
43191109 Decorative Rattan Look Planter
CARE INSTRUCTIONS: WIPE CLEAN WITH A SOFT DAMP CLOTH. DO NOT USE ABRASIVE MATERIALS AND SOLVENTS. CHECK AND TIGHTEN ALL PARTS REGULARLY. KEEP AWAY FROM DIRECT SUNLIGHT. FOR USE WITH POTS AND SAUCERS. FOR DOMESTIC USE ONLY. WARNING: DO NOT STAND, SIT OR LEAN ON THE PRODUCT. USE ONLY ON A FLAT SURFACE. DO NOT USE UNTIL ALL SCREWS, BOLTS AND KNOBS ARE FIRMLY SECURED. THIS PRODUCT CONTAINS SMALL PARTS AND SHARP POINTS, KEEP AWAY FROM CHILDREN AND BABIES. ADULT ASSEMBLY REQUIRED. FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY. ALTHOUGH THIS ITEM IS DESIGNED FOR OUTDOOR USE, OVER TIME THE WOOD SURFACE MAY DETERIORATE. TO PROLONG THE LIFE OF THIS ITEM, KEEP DRY AND PROTECT FROM WET WEATHER. PRODUCT HAS OPEN SECTIONS ON THE BASE. ENSURE SURFACE BELOW IS SUITABLE OR PLACE A MAT OR TRAY UNDERNEATH. MAXIMUM SAFE LOAD: 10kg
PART LIST
HARDWARE LIST Ax8
Bx2
1 2
3 2
1
STEP 1
Cx1 STEP 2
4
Do not tighten the screws
fully during assembly.
Fully tighten screws after
the final assembly steps
3
2
A
2
1
2
A
A
1
Ax4
A STEP 3
STEP 4
B
4 B
B
A
1
A
Bx2
A
Ax4
A
