Go Team Portable Heavy Duty Aluminum Roll Top Table User Manual
Assembly Instructions
Go Team! Portable Heavy Duty Aluminum Roll-Top Table
Large: (L x W x H): 47” x 28” x 28” inches
X-Large: (L x W x H): 55.5” x 28” x 28” inches
Step 1:
Remove the table frame and tabletop from the dual divided carry bag.
Step 2:
Set the table frame upright as shown. Unwrap the Velcro closure strap and unfold the table frame.
Step 3:
Lock the table frame into place by lifting the side support at the center. Slightly pull outward and up to lock the joint into the side frame. The frame is locked when the middle is fixed onto the metal locking pin in figure 3B Do this on both sides.
Figure 3A
Figure 3B
Step 4:
Unroll the slat tabletop as shown with the slats placed inside the table frame side rails
Step 5:
Attach the slats to the frame by pulling the ring pin and inserting into the frame. Do this on all corners.
Step 6:
The table is now ready for use. To disassemble, follow the same steps in reverse order.
