Ryobi Rgl18 Dual Temperature Glue Gun Instruction Manual

RGL18 Dual Temperature Glue Gun

Product Information

The RGL18 glue gun is a high-quality and reliable tool designed
for applying hot glue adhesives. Safety, performance, and
dependability have been prioritized in its design. Please read the
instructions carefully before assembling, operating, and
maintaining the product. The glue gun should only be used for its
intended purpose and not for any other operations to avoid
hazardous situations.

Intended Use

The glue gun is specifically intended for applying hot glue
adhesives. It is not suitable for use by individuals with reduced
physical, sensory, or mental capabilities unless supervised or
instructed by a responsible person. Children should be supervised
to prevent them from playing with the appliance. If the product is
to be stored unused for a long period, it is recommended to remove
the batteries. The supply terminals should not be
short-circuited.

Glue Gun Safety Warnings

• This appliance is not intended for use by persons (including
  children) with reduced physical, sensory, or mental
  capabilities.
• If the product is to be stored unused for a long period, remove
  the batteries.
• Do not short-circuit the supply terminals.

Additional Battery Safety Warnings

To reduce the risk of fire, personal injury, and product damage
due to a short circuit, never immerse the tool, battery pack, or
charger in fluid. Corrosive or conductive fluids can cause a short
circuit. When transporting lithium batteries, follow local and
national provisions and regulations. Ensure batteries do not come
in contact with other batteries or conductive materials during
transport.

LED Indicator

Maintenance

Use only original accessories and spare parts. For component
replacements, contact an authorized service center. Avoid using
solvents when cleaning plastic parts, as they may cause damage. Do
not let brake fluids, gasoline, petroleum-based products, or
penetrating oils come in contact with plastic parts, as they can
weaken or destroy them.

Symbols on the Product

• Safety alert
• V (Volts)
• Direct current
• Regulatory Compliance Mark (RCM)

Symbols in this Manual

• Note
• Off
• Parts or accessories sold separately
• Nozzle
• Glue stick chamber
• LED on/off indicator
• Mode selector
• Trigger
• Handle
• Drip tray

Product Usage Instructions

1. Read the instructions in the manual carefully before starting
   to use the glue gun.
2. Assemble the glue gun according to the provided
   instructions.
3. Ensure that the batteries are inserted correctly if
   applicable.
4. Plug in the glue gun and wait for the LED indicator to turn
   red, indicating that it is warming up.
5. Once the LED indicator turns green, the glue gun is ready to
   use.
6. Select the desired mode using the mode selector if
   available.
7. Load a glue stick into the glue stick chamber.
8. Hold the glue gun by the handle and aim the nozzle at the
   desired surface.
9. Press and hold the trigger to dispense the hot glue adhesive.
   Release the trigger to stop dispensing.
10. Be cautious of the hot surface and avoid direct contact to
    prevent injury.
11. After use, unplug the glue gun and allow it to cool down before
    storing it.

RGL18

IMPORTANT! It is essential that you read the instructions in this manual before assembling, operating, and maintaining the product. Subject to technical modifications.

Safety, performance, and dependability have been given top priority in the design of your glue gun.

INTENDED USE
The glue gun is intended for applying hot glue adhesives. Do not use the product for any other purpose. Use of the product for operations different from intended could result in a hazardous situation.

GLUE GUN SAFETY WARNINGS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
If the product is to be stored unused for a long period, the batteries should be removed.
The supply terminals are not to be short-circuited.

ADDITIONAL BATTERY SAFETY WARNINGS
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national provisions and regulations.
Follow all special requirements on packaging and labelling when transporting batteries by a third party. Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further advice.

LED INDICATOR
Colour Red Green

Status Warming up Ready to use

MAINTENANCE
Use only original accessories and spare parts. Should components need to be replaced which have not been described, please contact an authorised service centre. All repairs should be performed by an authorised service centre.
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleumbased products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

2 Original Instructions

SYMBOLS ON THE PRODUCT

Safety alert

V

Volts

Direct current

Regulatory Compliance Mark (RCM). Product meets applicable regulatory requirements.

Please read the instructions carefully before starting the machine.

To reduce the risk of injury or damage, avoid contact with any hot surface.

Hot surface
Do not dispose of waste batteries, waste electrical and electronic equipment as unsorted municipal waste. Waste batteries and waste electrical and electronic equipment must be collected separately. Waste batteries, waste accumulators, and light sources have to be removed from the equipment. Check with your local authority or retailer for recycling advice and collection point. According to local regulations, retailers may have an obligation to take back waste batteries and waste electrical and electronic equipment free of charge. Your contribution to the reuse and recycling of waste batteries and waste electrical and electronic equipment helps to reduce the demand of raw materials. Waste batteries, in particular containing lithium, and waste electrical and electronic equipment contain valuable and recyclable materials, which can adversely impact the environment and the human health if not disposed of in an environmentally compatible manner. Delete personal data from waste equipment, if any.
SYMBOLS IN THIS MANUAL

Note

Off

Parts or accessories sold separately

Nozzle
Glue stick chamber LED on/off indicator Mode selector
Trigger Handle Drip tray
Battery port
Replaceable nozzle Glue stick Wrench Operator’s manual Battery pack Charger
Know your product 3

1

2

Ø 11-12 mm

4
1 2

1 1
2
4 Getting started

3
4

1

2

4

2 3

1
2 3 1

2
3
1

4 2

4

2

1

3

5

Operation 5

1
1
2

2 2
3
1 2

6 Maintenance

PRODUCT SPECIFICATIONS
Glue gun Model Voltage Nozzle hole Long Reach Nozzle Hole Glue stick diameter Approximate heat up time (minutes) High Temperature Mode Low Temperature Mode Weight – excluding battery pack

BATTERY

Compatible battery pack (not included)

RB18L13 RB18L15 RB18L15A RB18L15B RB18L20 RB18L20A

RB18L25 RB18L25A RB18L40 RB18L40A RB18L50 RB18L50A

RB18L60A RB18L90A RB1815C RB1820C RB1825C RB1840C

RGL18 18 V 3.0 mm 2.5 mm 11 – 12 mm 3 200 °C 130 °C 0.4 kg
RB1840X RB1850C RB1850X RB1860X

Imported by: Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount Waverley, VIC 3149 Melbourne, Australia
Techtronic Industries N.Z. Limited Unit C, 70 Business Parade South, Highbrook, Auckland 2013, New Zealand
RYOBI is a trade mark of Ryobi Limited, and is used under license.
20220524v1