497270 Curio Display Cabinet
Product Information: Curio Display Cabinet
The Curio Display Cabinet is a stylish and functional piece of
furniture designed to showcase your valuable items. It features
glass door panels that provide a clear view of the contents while
protecting them from dust and damage. The cabinet comes with all
the necessary hardware parts for easy assembly, including knobs,
screws, rubber washers, strike plates, foam pads, pivot hinges, set
screws, nylon pads, and nylon washers.
Product Usage Instructions
CAUTION: Two people are required to assemble
the Glass Door Panels to the cabinet. Use care when handling the
Glass Door Panels. To avoid bodily injury or harm, assemble Glass
Door Panels in an area without children or other potential hazards
present.
- Choose a suitable location for the curio display cabinet and
refer to the cabinet set-up instructions for guidance. Securely
fasten the wall safety strap to the cabinet and wall and install
glass shelves before proceeding with Glass Door Panel
assembly. - Unpack the Glass Door Panels and set them aside in a safe
location. - Attach a Nylon Washer and a Pivot Hinge to each Pivot Hinge Pin
Hole at the bottom left and right of the cabinet. Install the Pivot
Hinges with the Set Screws facing the inside of the cabinet. Refer
to Figure A for visual reference. - With the help of another person, attach the right Glass Door
Panel to the cabinet. - Adjust the Glass Door Panel as necessary to ensure it can open
and close without any interference. - Repeat steps 4 and 5 to install the left Glass Door Panel.
Ensure that the left and right Glass Door Panels do not touch each
other. Adjust them as necessary. - Assemble a Knob to both Glass Door Panels using Rubber Washers
and Screws. Refer to Figure C for visual reference. - Peel off the protective paper from the adhesive side of the
black Foam Pad and attach a pad at each corner of the Glass Door
Panels. The pads should be flush with the edges. See Figure D for
visual reference. - Slide a Strike Plate over the four Foam Pads, ensuring that the
side with the clear protective cover is facing the inside of the
cabinet.
Once you have completed these steps, your Curio Display Cabinet
with Glass Door Panels is ready to be used. Enjoy showcasing your
valuable items in a stylish and secure manner!
CURIO DISPLAY CABINET INSTRUCTIONS FOR GLASS DOOR ASSEMBLY
Pivot Hinge (Preinstalled)
Strike Plate
Top Left
Strike Plate
Pivot Hinge (Preinstalled)
Top Right
Hardware Parts List:
2 – Knobs 2 – Screws 4 – Rubber Washers 4 – Strike Plates 4 – Foam Pads (black) 2 – Pivot Hinges 4 – Set Screws 4 – Nylon Pads 2 – Nylon Washers (white)
CAUTION: Two people are required to assemble the Glass Door Panels to the cabinet. Use care when handling the Glass Door Panels. To avoid bodily injury or harm, assemble Glass Door Panels in an area without children or other potential hazards present.
Pivot Hinge
1. Choose a location for the curio display cabinet. Refer to your cabinet set-up instructions. Securely fasten the wall safety strap to the cabinet and wall and install glass shelves prior to Glass Door Panel assembly.
Figure A
Nylon Washer (white)
Pivot Hinge Pin Hole (2 top, 2 bottom)
2. Unpack the Glass Door Panels and set aside in a safe location.
3. Install a Nylon Washer (1) and Pivot Hinge (1) to the Pivot Hinge Pin Hole as shown at the bottom left and right of the cabinet. Install the Pivot Hinges with the Set Screws facing the inside of the cabinet. See Figure A.
Note: The Pivot Hinges on the top of the Glass Door Panels have been preinstalled at the factory.
4. With two people, attach the right Glass Door Panel to the cabinet.
· One person insert the preinstalled Pivot Hinge into the top Pivot Hinge Pin Hole and hold the Glass Door Panel in position. Make certain the preinstalled Pivot Hinge has Set Screws facing the inside of the cabinet. See Figure B.
· With the first person holding the Glass Door Panel in position, the second person will hold the Nylon Pads against both sides of the Glass Door Panel as they slide the bottom of the Glass Door Panel into the bottom Pivot Hinge. Install the bottom of the Glass Door Panel into the bottom Pivot Hinge similar to the preinstalled top Pivot Hinge. See Figure B.
· Tighten the bottom Pivot Hinge Set Screws so they are snug do not over tighten. Check the top Pivot Hinge Set Screws to ensure they are also snug.
Set Screw
Nylon Pads
Pivot Hinge
Figure B
Pivot Hinge (Preinstalled)
Top Left
Strike Plate
Rubber Washers
Screw
Knob
5. As necessary, adjust the Glass Door Panel so it can open and close without interference.
6. Repeat steps 4 and 5 to install the left Glass Door Panel. Make certain the left and right Glass Door Panels do not touch. Adjust the Glass Door Panels as necessary.
7. Assemble a Knob (1) to both Glass Door Panels using Rubber Washers (2) and Screw (1) as shown in Figure C.
8. Remove the protective paper from the adhesive side of the black Foam Pad and attach a Foam Pad at the corners flush to the edge of the Glass Door Panels. See Figure D.
9. Slide a Strike Plate over the four Foam Pads. Attach so the side with clear protective cover is facing the inside of the cabinet.
· If the door does not catch firmly, remove the clear protective cover.
Glass Door Figure C
Glass Door
Strike Plate Foam Pad
Figure D
497270 12/2021
