Lifestraw Peak Series Gravity Purifier User Manual

Peak Series Gravity Purifier

Product Information: Gravity Purifier

The Gravity Purifier is a water filtration system designed to
provide safe drinking water by removing impurities. It consists of
a membrane ultrafilter cartridge and a dirty water gravity bag.

Long Term Storage Instructions:

1. Backwash the membrane ultrafilter according to the backwashing
   instructions provided.
2. Rinse the dirty water gravity bag, basket, cap, and hose with
   safe water.
3. Fill the dirty water bag with safe water until the max line and
   add 1/2 teaspoon of household bleach. Close the cap and shake the
   bag a few times to mix well.
4. Connect the hose to the filter, hang the gravity system, and
   twist to allow the flow of water through the filter until the
   gravity bag is empty.
5. Disconnect the filter and keep it vertical for a few moments
   until no water runs out. Do not shake the filter.
6. Twist to close the membrane ultrafilter cartridge, keep the
   hose attached to the filter, and roll it around.
7. Allow the dirty water gravity bag to dry naturally by leaving
   the cap removed.
8. Store the Gravity Purifier in a cool, clean place.

Note: After long-term storage, filter one batch
of water and discard it to rinse the system. Your system is ready
to be used again.

If you have additional questions about storage and maintenance
for your LifeStraw Peak Solo Water Filter, please contact us at
[email protected].

G RAV I T Y P U R I F I E R
LONG TERM STORAGE
1. Backwash membrane ultrafilter according to backwashing instructions.
2. Rinse the dirty water gravity bag, basket, cap, and hose with safe water.
3. Fill the dirty water bag with safe water until max line and add 1/2 teaspoon of household bleach. Close the cap and shake the bag a few times to mix well.
4. Connect the hose to the filter, hang the gravity system, and twist to allow the flow of water through the filter until the gravity bag is empty.
5. Disconnect the filter and keep vertical a few moments until no water runs out. Do not shake the filter.
6. Twist to close the membrane ultrafilter cartridge, keep the hose attached to the filter and roll it around.
7. Allow the dirty water gravity bag to dry naturally, by leaving the cap removed.
8. Store in a cool, clean place.
Note: After long time storage, filter one batch of water and discard it to rinse the system. Your system is ready to be use again.
If you have additional questions about storage and maintenance for your LifeStraw Peak Solo Water Filter, please contact us at [email protected]