Hard Head Storage Shelving Unit
OPERATING INSTRUCTIONS
Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
SAFETY INSTRUCTIONS
- Place the shelf unit on a level surface. Otherwise, this will compromise safety or the maximum supporting capacity.
- The maximum spot load is 265 kg per shelf.
- The weight must be evenly distributed on the shelves.
- Make sure not to exceed the maximum load per shelf, or for the whole unit.
- Put heavy objects on the bottom shelves and lighter objects on the top shelves.
- Do not exceed the maximum weight.
- These instructions should be enclosed with the product if it is sold or passed on.
- Do not climb, or stand on the shelves.
- Do not lean or place ladders on the shelves.
- Use a step ladder to reach the top shelf.
- Do not expose the product to rain or moisture.
- The product is only intended to be loaded by hand.
- Do not put the shelf unit in a room that is very humid because this can damage the shelves.
- Anchor the unit with a suitable wall bracket.
- Only use plugs and screws suitable for the type of wall and weight of the shelves. Plugs, screws and tools for wall mounting sold separately.
NOTE:
Make sure not to drill into water pipes or electric cables.
SYMBOLS
Read the instructions.
TECHNICAL DATA
- Size W90 x H180 x D45 cm
- Weight 22 kg
- Max weight per shelf 265 kg
DESCRIPTION
- Matches HardHead’s flexible garage furniture, e.g. art. no. 006417.
- Can be combined with Jula’s corner unit 017285 Robust.
ASSEMBLY
- At least two persons are needed for assembly.
- Always wear suitable clothing: safety gloves and safety shoes are recommended.
- Remove all the packaging material and check that all the parts are included.
- Check the shelf unit for transport damage before assembling.
- Assemble the shelf unit on a clean and level surface (e.g. carpet) to avoid damage.
- Use a rubber mallet (H) to avoid damaging the material
NOTE:
Tools (G) and (H) are sold separately.
ONE SECTION
TWO SECTIONS
