Top Age14+ Radio Control Micro Planes Instructions

AGE14+ Radio Control Micro Planes

Product Information

The product is an aircraft with a battery-powered system. It
includes a charger, landing gear, a transmitter, and digital trims
for adjusting the centered position of the aileron, rudder, and
elevator.

Charging Instructions:

1. Unplug the battery from the aircraft.
2. Carefully insert the charger into the computer’s USB port or
   USB adapter (5V output).
3. Connect the battery to the charger.
4. The charging process takes about 3 hours. Do not charge the
   battery for more than 4 hours for safety reasons.
5. During charging, the red LED indicator will be on. When
   charging is complete, the LED indicator changes to green.

Landing Gear Assembly:

1. Snap the steer wire of the landing gear onto the slots of the
   main wing as shown.
2. Insert the tail landing gear into the plastic mounting hole of
   the tail part of the fuselage.

Transmitter Power On:

1. Open the battery cover of the transmitter.
2. Insert the male connector of the battery into the female
   connector of ESC.
3. Put the battery into the battery case and lock the battery
   cover using the plastic button.

Usage Instructions:

Before operating the aircraft, it is essential to read and
follow all instructions in the manual. Additionally, digital trims
can be used to adjust the centered position of the aileron, rudder,
or elevator. Each time a trimmer is moved, the servo output will
change by one angle. If the trimmer is held, the output will scroll
in that direction until the trimmer is released or the output
reaches its end. A short beep sound indicates that the trimmer is
centered.

Assembly Process for P-39’s Landing Gear:

1. Insert the front landing gear into the slot of the front
   fuselage.
2. Fix it with the screw from the accessory bag.

1.Unplug the battery from the aircraft. 2. Carefully insert the charger into the computer’s USB port or USB adapter (5V output). 3. Connect the battery to the charger. 4.The charging process takes about 3 hours. For safety reasons, do not charge the battery for more than 4 hours.When charging, the red LED indicator is normally on. When charging is complete, the LED indicator changes to green.

4.Snap the steer wire of landing gear onto the slots of the main wing as shown.
Insert the tail landing gear to the plastic mounting hole of the tail part of the fuselage.

5. Power on the transmitter First.Open the battery cover and insert the male connector of the battery into the female connector of ESC, then put the battery into the battery case and lock the battery cover by plastic button.
6. The setting is completed. Before startingto operate the aircraft, be sure to read and follow all instructions in this manual.
Assembly Process for P-39’s Landing gear
1As show please insert the front landing gear to the slot of the front fuselage, and fix it with the screw from the accessory bag.

8

9

10

Digital trims allow vou to adiust the centered position of aileron, rudder or elevator. Each time when a trimmer is moved, the servo output will change one angle. lf the trimmer is held, the output will scrol in that direction unti the trimmer is released or the outout reaches its end. When you hear a short beep sound. it means the trimmer is centered.
11

13

14

15

16