311i Max Blue Pure Air Purifier
Product Information
- Product Name: Blue Pure 311i Max
- Model Number: 3332111100
- Product Type: Air purifier
- Intended Use: Indoor use only
Safety Information
The Blue Pure 311i Max air purifier is an electrical appliance
designed for indoor use only. To reduce the risk of fire, electric
shock, or injury, it is important to take necessary precautions
while using the product.
Regulatory Information
Changes or modifications to this unit not expressly approved by
the responsible party may void the user’s authority to operate the
equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, as per Part 15 of the FCC
Rules. It is designed to provide reasonable protection against
harmful interference in residential installations. However, there
is no guarantee that interference will not occur in a particular
installation.
If the equipment causes harmful interference to radio or
television reception, the user is encouraged to try the following
measures to correct it:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver. - Connect the equipment into an outlet on a different circuit
from the receiver. - Consult the dealer or an experienced radio/TV technician for
assistance.
This device also complies with Canadian ICES-003.
The device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). It should not cause interference
and must accept any interference, including interference that may
cause undesired operation.
RF Exposure Information: The equipment should be installed and
operated with a minimum distance of 20 centimeters between the
radiator and the user’s body.
Product Map
- A – User interface
- B – Air outlet
- C – Air quality indicator (AQI)
- D – Fan motor
- E – Silencer
- F – Particle & carbon filter
- G – Washable fabric pre-filter
Product Usage Instructions
- Getting started:
- Press the ON/Standby button (1) to turn on the air
purifier. - Adjust the mode and fan speed using the Fan Speed button
(2). - The air purifier has four fan speeds: Night mode (lowest and
most silent), Speed 1, Speed 2, and Speed 3 (highest).
User manual
Scan here to access additional product, registration, warranty information and FAQs.
Blue Pure
311i Max
Safety information
Product name Blue Pure 311i Max
Model number 3332111100
Blue Pure 311i Max air purifier is electrical appliance for indoor use only. Take the necessary precautions to reduce the risk of fire, electric shock or injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Supervise children to ensure that they do not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Always disconnect the appliance from the power supply before maintenance. Do not attempt to open or service the appliance yourself, this can void your warranty. Service must be done by the manufacturer, service agent or similarly qualified personnel using only original Blueair spare parts. Ensure that the power cable and the power plug are not at risk of getting damaged. To avoid hazard, a damaged power cable must always be replaced by the manufacturer, service agent or similarly qualified person. If the appliance is damaged or malfunctions, turn it off, disconnect it from the power supply and contact Blueair. The power plug must be firmly inserted in the power socket.
When disconnecting the unit from the power supply, do not pull on the power cord, pull on the power plug. Use the power cable provided with your Blueair air purifier to plug directly and firmly into an appropriate, electrical outlet. Do not use an extension cord or a power strip. Refer to the rating label on your appliance. Do not alter the power plug in any way. If the plug does not fit into the outlet, contact qualified personnel to install the proper outlet. Do not use the included power cord for anything else but the appliance. Do not allow objects to enter or block the air inlets and air outlets as this can cause electric shock or damage the appliance. Do not place any objects on top of or directly against the appliance. Do not sit on, stand, climb onto or hang from the appliance. Keep the appliance, including the power cable, at a safe distance from heated surfaces and open fire. Keep the appliance and power plug away from water and other liquids. Keep the appliance and power plug away from chemicals such as pesticides and deodorants. Place the air purifier on the floor or a stable surface to prevent tipping. Do not use the appliance outdoors or in wet environments such as bathrooms, laundry rooms or pool areas. Always turn off and disconnect the appliance from the power supply before moving the unit, changing filters, cleaning or carrying out maintenance procedures. Never clean with gasoline, chemical solvents, or corrosive materials as these agents may damage the air purifier.
Regulatory information
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC/ISED RF Exposure Information: This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
Product map
A User interface B Air outlet C Air quality indicator (AQI)
D Fan motor E Silencer F Particle & carbon filter
G Washable fabric pre-filter
A
B
C
Air quality status (PM 2.5)
D
The air purifier has a particle sensor to
measure the fine particles (PM2.5) level.
The LED indicator displays air quality
status in 5 colors from excellent (blue) to
E
very polluted (red).
F G
Getting started
1 ON/Standby button 2 Fan Speed button
Indicators 3 Auto mode 4 Night mode (lowest
speed setting) 5 Speed 1
6 Speed 2 7 Speed 3
8 Filter replacement 9 Wi-Fi
5
4
6
3
7
1 2 9
A
3
2
8 1
Two button control
Press the ON/Standby button to turn the air purifier. Adjust the mode and the fan speed using the Fan Speed button. This air purifier has a total of four fan speeds – Night mode being the lowest/most silent one, Speed three being the highest one.
Auto mode
Automatically adjusts the fan speed based on your PM2.5 indoor level to ensure optimal air quality. Recommended setting.
Night mode
Fan speeds 12-3
1 , 2 , 3 Lowest fan speed and
Fan speed levels which
fully dimmed lights.
you can manually set by
pressing the Fan Speed
button on the interface
or adjust via Blueair app.
How to use tips
Change brightness
Step 1
Press the Fan Speed button and On/ Standby button at the same time. Hold for three seconds.
Then, keep holding your finger on the On/Standby button and tap the Fan Speed button with the other finger to adjust brightness.
Step 2
If the brightness is on the lowest level, then it will increase by one level. If the brightness is on the highest level, then it will decrease by one level.
Enable/disable Wi-Fi/Bluetooth
Wi-Fi is on by default. Long press Fan Speed button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.
When the connection is enabled, the Wi-Fi LED will blink. After successfully connecting the appliance to the app, the Wi-Fi LED will stay solid. Wi-Fi LED off means the connection has been disabled.
5 seconds
Enable/disable Child lock
Long press On/Standby button for about 5 seconds (until all the LEDs of the interface light up and blink once). Then release.
When the Child lock is on the air purifier will continue to operate but the speed/mode button will be locked.
5 seconds
Filter reset
Extra long press Fan Speed button for about 15 seconds (until all the LEDs of the interface light up for the second time and blink once). Then release.
After replacing the filter, it is required to manually conduct filter reset on the appliance. If done correctly, the red filter replacement indicator will blink three times and then disappear.
15 seconds
Factory reset
Extra long press On/Stanby button for about 30 seconds (until all the LEDs of the interface light up for the second time and blink four times). Then release.
After factory reset, the air purifier restarts with default configuration will go into Standby mode.
30 seconds
Connect to the Blueair app
Connecting to the Blueair app allows you to control the air purifier remotely and monitor filter usage. The app offers additional functions to the air purifier.
Step 1 Download the Blueair app from the App store or Google play.
Step 2 Open the app. Create or sign into your Blueair account.
Step 3
Click on Connect Product and select Blue Pure Max. Follow the instructions to complete app pairing.
First time connection tips
Make sure to turn on your air purifier. Once the Wi-Fi indicator is blinking, it is ready to be paired with your app.
Bluetooth is required for first time pairing. Turn your phone’s bluetooth on and keep your phone within 3ft of the air purifier for initial pairing.
Make sure you are using a visible Wi-Fi network that is not hidden. VPN (Virtual Private Network) should be deactivated while using the Blueair App.
This air purifier can only connect to 2.4 GHz Wi-Fi. If you are using a dual-band Wi-Fi router, make sure to select 2.4GHz.
2.4 GHZ
Get the app
Keep your air purifier within 15 feet of your Wi-Fi router to maintain optimal connection.
15 feet
Maintenance information
Important! Turn the air purifier off and disconnect the air purifier from the power supply before maintenance.
Changing your filter
1 2
A
3
When your air purifier’s indicator light turns red, it’s time to change the main filter. This will occur some time between 6 and 9 months of operation, depending on usage and your air quality conditions.
Step 1
Turn off the air purifier and unplug it. Rotate the top counter-clockwise to unlock, then lift up to remove it.
Step 4
Place the silencer back on top of the filter. Pull up the the fabric pre-filter over the filter and the silencer. (Please ensure that the leather tag is on the upper side of the fabric pre-filter.)
Step 2 Remove the fabric pre-filter and the silencer.
Step 5 Twist the top back on and plug in the air purifier.
Step 3
Use the filter handles to pull out the old filter and replace with new. Make sure to remove plastic wrapping before inserting the new filter in the appliance.
Step 6
Important! Turn the air purifier back on and reset the filter indicator by pressing down the Fan Speed button for 15 seconds. (until all the LEDs of the interface light up for the second time and blink once). Then release.
Cleaning your washable pre-filter
Clean your pre-filter regularly when you see dust or dirt. Vacuum the exterior of the fabric with a soft brush attachment. If the pre-filter requires a deeper clean, wash according to the instructions on the pre-filter´s label. Hang to dry.
Step 1
Turn the air purifier off and unplug it. Rotate the top counter-clockwise to unlock and remove it.
Step 2
Remove the fabric pre-filter from the silencer and main filter.
Step 3
Wash according to instructions on the fabric pre-filter´s label.
Step 4
Pull the clean pre-filter back over the silencer and main filter.
Step 5
Please ensure that the leather tab of the pre-filter is on the upper part.
Step 6
Push the top cylinder down, rotate it clockwise to lock it.
Disposal and recycling
This air purifier should be recycled as electronic waste. If you have any questions regarding the disposal of this air purifier, please contact your local waste management for best way to recycle.
Troubleshooting
Issue
Potential Cause
Try this
There is a red circle on my air purifier’s panel.
It is time to change the main filter.
1. Change filter according to the instructions in this guide. 2. Reset the filter life timer: press down the fan speed button until the red light disappears (15 seconds).
My air purifier is making too much noise.
Air purifiers that are set on a high-speed level produce more noise because they function at faster rates.
The plastic sealing is still on the filter.
Set a lower fan speed. The air purifier should be quieter.
1. Remove the main filter according to the instructions in this guide. 2. Make sure that the plastic cover is removed from the filter.
If the main filter or pre-filter are clogged or dirty, the engine might not get sufficient airflow, which may result in increased noise levels.
Unplug your air purifier and vacuum the air purifier and its fabric pre-filter from the outside with a soft brush attachment. Clean the fabric pre-filter in the washing machine. Replace the main filter when your filter indicator turns red.
I cannot connect my air purifier.
The air purifier is too far from your phone and router during the set up.
1. Ensure that your phone, air purifier and Wi-Fi router are in the same room and in close distance during initial set up (follow the app for exact distance instructions). Once you have successfully paired your air purifier you can place it at your desired location. 2.Make sure that your air purifier is plugged in and powered on.
The Blueair App is not up to date.
Open your App Store in your phone and ensure you have the latest Blueair app version.
The router is not on or has no connection. The router is not using a standard connection.
Bluetooth is deactivated.
Ensure the following before trying to connect your product again: 1. Internet is currently running 2. You are using a 2.4Ghz network. 3. Deactivate VPN.
Ensure Bluetooth is enabled in your smartphone’s settings.
My air purifier has lost connection.
Temporary Wi-Fi disturbances. New Wi-Fi settings or router.
If your air purifier does not re-connect by itself after a few minutes: 1. Open the Blueair app. 2. Select your air purifier and go to Product Settings. 3. Delete the air purifier. 4. Go back to the home screen and select “Connect Product”. Follow the connection instructions on the product.
My indoor air quality is not improving. Indoor air quality is polluted. Air quality sensors are dusty and showing incorrect levels.
1.Disconnect the power cable from the wall outlet and wait approximately 30 seconds 2. Make sure that there are no objects or dust around the air quality sensors at the back of the air purifier. 3. Reconnect the power cable. 4. Press the power button If the air quality does not improve with the use of the air purifier and with ventilation, please contact us.
For more information and troubleshooting tips, please check the Support page on www.blueair.com
www.blueair.com
Blueair Inc. 125 S Clark, Suite 2000, Chicago, IL, 60603 USA Tel: +1 888 258 3247 [email protected]
Air Purifiers & Air Filters for Clean Air in the Home | Blueair
