MLSH11 Fan Remote Controller
Product Information
- Model: MLSH11
- IC: 26807-MLSH11
- FCC ID: 2AYGE-MLSH11
- Manufacturer: MeLaSen Electronics Ltd.
- Address: No.29 Industrial Road, Xiaolan
Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R.
China
Product Usage Instructions
- Ensure that the product is placed on a stable and level surface
before use. - Connect the power cable to the appropriate power source and the
product. - Turn on the product using the power button located on the front
panel. - Use the control panel or remote control to navigate and select
desired settings. - If applicable, refer to the user manual for specific
instructions on advanced features and functions. - To turn off the product, press the power button again or use
the designated power-off option. - When not in use, unplug the power cable from the power source
and store the product in a safe place.
Please note that this is just a brief overview of the product
usage instructions. For detailed instructions and safety
information, refer to the complete user manual provided with the
product.
Model: MLSH11 IC:26807-MLSH11 FCC ID: 2AYGE-MLSH11 Manufacturer: MeLaSen Electronics Ltd. Address:No.29 Industrial Road, Xiaolan Industrial Estate, Xiaolan Town, Zhongshan, 528415 Guangdong, P.R. China
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitationestautorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d’encompromettre le fonctionnement.
