BAL-915 1 Light White Rope Basket Pendant Light with Woven Shade
Product Information
This product is a light pendant from MonteauxTM Lighting, with
an item number of 1001721112 and model number of BAL-915. The light
pendant is designed for indoor use only and comes with a light
fixture (A), shade (B), and lock ring (C). The package also
includes a mounting unit (AA), mounting screws (BB), wire nuts
(CC), and screws (DD). The product comes with a Customer Service
Team that can be reached at 1-800-446-9092 for questions, problems,
or missing parts. The user manual includes safety information,
warranty details, and pre-installation instructions.
Product Usage Instructions
Before starting the installation, read all instructions
carefully. To avoid damaging the product, assemble it on a soft,
non-abrasive surface such as carpet or cardboard. Keep your receipt
and these instructions for proof of purchase.
Safety Information
Consult a qualified electrician if you have any electrical
questions. Inspect the wire insulation for any cuts, abrasions, or
exposed copper that may have resulted during shipping. If there is
a defect in the wire, do not attempt installation. Please call the
Customer Service Team at 1-800-446-9092. Before starting
installation of this fixture or removal of a previous fixture,
disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Pre-Installation
The pre-installation instructions include planning installation,
tools required, and hardware included. The user manual recommends
using a ladder, safety glasses, electrical tape, Phillips
screwdriver, flat blade screwdriver, pliers, and wire strippers for
installation. The hardware included in the package consists of a
mounting unit (AA), mounting screws (BB), wire nuts (CC), and
screws (DD).
Installation
- Attaching the mounting unit to the junction box: Attach the
mounting unit (AA) to the junction box (not included) with mounting
screws (BB). - Making the electrical connections:
- Connect the copper wire on the light fixture (A) to the
mounting unit (AA) by securing it with the pre-installed ground
screw. - Connect the black to black wire (power), the white to white
wire (neutral), and the copper wire to the ground wire with wire
nuts (CC) and secure with electrical tape (not included). - If the wires from the fixture are the same color, attach the
side with markings or letters to the black (positive) wire and the
other to the white (neutral) wire.
- Connect the copper wire on the light fixture (A) to the
Item # 1001721112 Model # BAL-915
USE AND CARE GUIDE
1 LIGHT PENDANT
Questions, problems, missing parts? Before returning to the store, call MonteauxTM Lighting Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
THANK YOU
We appreciate the trust and confidence you have placed in MonteauxTM Lighting through the purchase of this light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing MonteauxTM Lighting!
Table of Contents
Table of Contents……………………………………………………2 Safety Information…………………………………………………..2 Warranty ………………………………………………………………… 2 Pre-Installation …………………………………………………………3
Planning Installation………………………………………………………….3 Tools Required………………………………………………………………….3
Hardware Included…………………………………………………………….3 Package Contents……………………………………………………………..4 Installation ……………………………………………………………. 5 Operation ………………………………………………………………. 6 Care and Cleaning …………………………………………………. 6 Troubleshooting…………………………………………………….. 6
Safety Information
Consult a qualified electrician if you have any electrical questions.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-446-9092.
WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-446-9092.
MONTEAUX LIGHTINGTM
2
Please contact 1-800-446-9092 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Keep your receipt and these instructions for proof of purchase. For indoor use only
TOOLS REQUIRED
Ladder
Safety glasses
Electrical tape
Phillips screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA
BB
CC
DD
Part
Description
AA
Mounting unit
BB
Mounting screw
CC
Wire nut
DD
Screw
Quantity 1 2 3 2
MONTEAUX LIGHTINGTM
3
Please contact 1-800-446-9092 for further assistance.
PPrree–IInnssttaallllaattiioonn ((ccoonnttiinnuueedd))
PACKAGE CONTENTS
A B
C
Part
Description
A
Light fixture
B
Shade
C
Lock ring
Quantity 1 1 1
MONTEAUX LIGHTINGTM
4
Please contact 1-800-446-9092 for further assistance.
Installation
1 Attaching the mounting unit to the junction box Attach the mounting unit (AA) to the junction box (not included) with mounting screws (BB).
AA BB
2 Making the electrical connections
Connect the copper wire on the light fixture (A) to the mounting unit (AA) by securing it with the pre-installed ground screw.
Connect the black to black wire (power), the white to white wire (neutral), and the copper wire to the ground wire with wire nuts (CC) and secure with electrical tape (not included).
NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.
CC
AA
3 Securing the light fixture
Secure the light fixture (A) to mounting unit (AA) with the screws (DD).
AA DD
A
Adjustable lamp body height
4 Installing the light bulb
A
Insert the socket ring (C) into the shade (B), placing the tapered side first. Secure the shade (B) to the light fixture (A) using the socket ring (C).
Install one E26 60-watt bulb (not included).
B
C
5
MONTEAUX LIGHTINGTM Please contact 1-800-446-9092 for further assistance.
Operation
1 Turning the light on
Turn the light switch on to activate the fixture.
Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem The bulb will not light.
Possible Cause The bulb is burned out. The power is off. There is a faulty wire connection. The circuit breaker is off.
Solution Replace the light bulb. Ensure the power supply is On. Check the wiring. Ensure the circuit breaker is in the On position.
The fuse blows or circuit There are crossed wires or the breaker trips when the power wire is grounding out. light is turned on.
Check the wire connections. Contact a qualified electrician or call the Customer Service Team at 1-800-446-9092.
MONTEAUX LIGHTINGTM
6
Please contact 1-800-446-9092 for further assistance.
Questions, problems, missing parts? Before returning to the store, call Monteaux LightingTM Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
Retain this manual for future use.
