4modernhome T129-wh Standard White Porcelain Table Lamp Set Instructions

T129-WH Standard White Porcelain Table Lamp
Set Instructions

Assembly & Installation Instructions

Dear Customer:
Thank you for your business!
If you have any question or problem, please send us an email to [email protected] or call us at 870-949-8466. We will rything possible to make you complet atisfied with your purchase. Produc ws help future customers to make th?Th purchase decision. You are encofird to share your experience by leaving ao,slcort product review on the platform where you bought this product.
Thank you!
Zgear Team
Warning: If any special control devices are used with this fixture, follow the instructions carefully to assure full compliance with N.E.C. requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer and birth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: It is highly recommended to get an electrician to install this light. Please make sure to turn the electricity off at the main circuit breaker before beginning installation. All glass is fragile. Use care when handling glass component(s) and/or lamp(s)

1. Unpack all parts from cartons carefully.
2. Carefully pull-out excess power cord from the lamp base while assembling to prevent the cord from becoming twisted.
3. Tighten the lamp socket(B)into the body(A)until tight.
4. Place the harp(D)onto the saddle(C).
5. Place the shade(E)onto the harp(D).
6. Tighten the finial(F .nto the harp(D)until tight.

WIRE CONNECTION DIAGRAM

Wires meeting safety standards are required to connect the electical circuit
CAUTION: Risk of fire
Please read all instructions carefully. Before you proceed to install,make sure that the power supply is turned off and remains off until installation is completed.

PARTS INCLUDED

STEPS TO ASSEMBLE THE LAMPSHADE

1. Take out the lampshade and 2 wrought iron frames
   
2. Unfold the fabric lampshade
   
3. Fix the two frames with velcro along the edge of the lampshade
   
4. Mount the harp and install the bulb (Not included)
   
5. Tighten the finial to secure the lampshade

MADE IN CHINA