searchlight 96382-1BK TRIBECA Table Lamp
96382-1/EU96382-1
HOW TO USE
SAFETY INFORMATION (Please retain for future reference)
- Before commencing assembly ensure the table lamp is unplugged from the mains socket.
- This is a Class 2 product and does NOT require an Earth connection – 220 240 Volts-50Hz..
- Take care to not twist the cable during assembly.
- This product must be installed in accordance with the national building and wiring regulations, if in doubt consult a qualified electrician.
- We do not recommend any modifications of the fitting as this may Invalidate the warranty and render the fitting unsafe .
- This fitting is suitable for installation in Indoor locations only .
- Do not mount the fitting in a damp atmosphere.
- Ensure sufficient access to the fitting to enable safe maintenance.
- The Luminaire should be positioned so that prolonged staring into the luminaire at the distance closer than 0.2m is not expected.
LAMP INFORMATION
- The LED lamps are not replaceable, when the lamps reach the end of their life the whole luminaire shall be replaced.
- The LED chip board and LED driver are removable, please refer the diagram. Once removed this fitting must be disposed.
- This fitting is not suitable for dimming.
AFTERCARE AND MAINTENANCE:
- Always disconnect power supply when servicing or cleaning.
- Clean only with a dry or slightly damp cloth.
- Do no use any abrasive cloths or cleaners as this may damage the product
APPROVED
Q.C 17/11/2020 ISSUE 1
