Philips Hue 802900 LED Smart Retrofit
Specification
- BRAND: Philips Hue
- COLOR: White Ambiance
- MATERIAL: Metal
- STYLE: 6-inch Old Version
- LIGHT FIXTURE FORM: Recessed
- INDOOR/OUTDOOR USAGE: Indoor
- POWER SOURCE: Electric
- PRODUCT DIMENSIONS: 7.3″L x 7.3″W x 2.8″H
- SPECIAL FEATURE: 6-inch Old Version
- CONTROL METHOD: Voice
- LIGHT SOURCE TYPE: LED
- VOLTAGE: 120 Volts
- LIGHT COLOR: Hue White
Introduction
With four pre-programmed smart light recipes that were created just for your everyday tasks, brighten your day. While the warmer pictures assist comfortable reading or help relax a busy mind, the two cool-toned scenes aid in helping you get going in the morning or maintain your attention. You can instantly take full control of your smart lights with the Philips Hue White Ambiance 4″ Retrofit Recessed Downlight by using just your voice. The Philips Hue App’s Bluetooth Control feature also allows for control. Setup for your smart lighting is simple and painless.
To connect immediately to your new bulb, just screw in the Hue Bluetooth downlight and download the Hue Bluetooth app. Fixture total lumen output: 700 lm. Undercut: Tab cut. With the Hue Bluetooth app, you can easily manage up to 10 smart LED bulbs in one room to create the perfect ambiance. Simply purchase the Philips Hue Hub to enjoy the complete Hue experience and to benefit from smart lighting features like away-from-home management (Model 458471) To locate this item on the internet, type in “Philips Hue Hub” or “B016H0QZ7I.” Additionally, hubs can be found in some Hue Starter Kits.
INSTALLATION OPTIONS
- Use the Bluetooth app to connect directly to your new downlight.
- Connect to your Philips Hue Hub.
- Connect directly to an Echo device just say “Alexa discover devices”.
HOW TO INSTALL
Open the light’s junction box, usually a plate will pop up. Run your cable into the box and clamp it. Connect it black to black, white to white and ground to ground. Fold the wires into the box and replace the cover. Now mount your lights. Pull the clips in and slip the can’s box into the hole and push the can body up. With your thumb or screwdriver, pull the each clip up and outwards until it clamps the fixture. Add the trim
HOW TO REPLACE OLD RECESSED LIGHTS
- Cut the power. By tripping the circuit breaker at the electric service panel, turn off the power.
- Check the fixture’s power by opening it.
- Take the fixture out.
- Eliminate the Fixture Hole.
- Take away the old box.
- Connect the Fixture Wires, then the Circuit Cable.
- Place the Recessed Fixture in place.
HOW TO CONNECT VIA BLUETOOTH
The addition (+) icon is located in the top right corner of the screen under Settings > Lights. Your lights will be immediately located by the Hue Bluetooth app. The lights will eventually show up on the Home tab.
FAQs
Yes, they stand up to mist/steam well.
The box for 5/6 says 700 lumen. the website says 835.
These lights require a can in the ceiling. The included wire harness adapter allows them to be retrofit to a regular light socket in the top of the can.
I have these. They don’t work with my in-wall-mounted dimmer switch. I understood from the electrician that they won’t work that way. You can call Philips to find out for sure if there’s any way. Philips has good customer support that has helped me several times. I have their bulbs (with voice and app control) throughout the house.
I believe that what you are referring to is a new slim fit light and that won’t work with an existing high-hat. It’s meant for use in areas where a traditional high-hat wouldn’t fit. Try searching slim downlight for comparison.
A normal light switch works.
Yes, you can.
Pull one side of the trim down and ue needle nose pliers to gently unhook one spring (don’t let it ricochet into your eye) and then remove the next spring. Usually there are just two springs.
Yes, I have 6 can lights in a room, I have 4 colored and two white ambiance, it works very well, more than enough color. When I want a color vibe in the room I set the white ambiance to be off and only use the color ones.
They sell the 4” ones and the 5-6” ones. Just make sure you buy the 4” ones.
Yes, these are equipped with Bluetooth, so you can control them from your phone. You will have limited range with your phone though, probably won’t be able to control them from other rooms.
They’re absolutely pair-able with Lutron switches, they’re listed as compatible with Philips-Hue on their website, I’ve used them in my own home as well.
The light comes with the 2-pin orange connector which is a standard for all LED lights.
Yes, you can connect any hue bulb to Alexa and control everything via voice or screen.
Not that I have been able to find. You need the hub.
