74030 Cross 5 Cross 5 XL Wheelchair
Product Information: Angle Adjustable Legrest with Foldable
Calf Support
The angle adjustable legrest with foldable calf support is a
product designed for providing comfortable leg support while
sitting. The legrest is stepless height adjustable, and the calf
support can be mounted at two different heights. The product comes
with a quick-release feature that allows easy adjustments to the
desired angle. It also has a lockpin mechanism that ensures the
calf support stays securely in place.
Product Usage Instructions:
- Start by loosening screw (B) completely and remove the calf
support from the legrest. - On the inside of the legrest, you will find two grooves.
Replace the calf support so that the lockpin (C) on the upper part
of the legrest runs in one of the grooves. - Retighten screw (B) to secure the calf support in place.
- To adjust the angle of the legrest, release the quick-release
(A), adjust to the desired angle, and retighten the quick-release
to lock it in place. - Make sure to adjust the height of the calf support to your
desired level before using the product.
Note: Refer to the parts list for reference when assembling or
disassembling the product.
Monteringsanvisning/Assembly instructions/Montageanweisung
25567-1 25567-2 Vinkeljusterbart benstöd med uppfällbar vadplatta Angle adjustable legrest with foldable calf support Winkelverstellbare Beinstütze mit aufklappbare Wadenplatte
74030.4 2022-08-12 1
A
B
C
Vinkeljusterbart benstöd med uppfällbar vadplatta Benstödet är steglöst justerbart i höjd:
– lossa snabbkopplingen (A) och ställ in önskad vinkel – dra åt snabbkopplingen Vadplattan kan monteras i två olika höjdlägen: – lossa skruven (B) helt och lyft av vadplattan – på insidan av vadplattans hållare finns två spår – sätt tillbaka vadplattan så att ett av spåren kommer
över låspiggen (C) på benstödets ovansida – fäst skruven (C)
Angle adjustable legrest with foldable calf support The legrest is stepless height adjustable:
– release Quick-release (A) and adjust to desired angle. – retighten Quick-release The Calf support can be mounted at two different heights: – loosen screw (B) completely and remove calf support – on the inside there are two grooves – replace the Calf support so that the lockpin (C) on the
upper part of the legrest, runs in one of the grooves – retighten screw (C)
Winkelverstellbare Beinstütze mit aufklappbare Wadenplatte Die Beinstütze ist in der Höhe stufenlos einstellbar:
– Schnellkupplung (A) lockern und gewünschten Winkel einstellen
– Schnellkupplung festdrehen Die Wadenplatte kann in zwei verschiedene Höhen montiert werden:
– die Schraube (B) ganz lockern und die Wadenplatte abheben
– auf der Inseite des Wadenplattehalter gibt es zwei Spuren – die Wadenplatte zurücksetzen so daß einer der Spuren über
den Verschluß des Oberteils der Beinstütze kommt – die Schraube (C) festdrehen
Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp www.etac.com
Artikellista vinkeljusterbart benstöd Art. Nr 25567-1/25567-2
1
80731 Snabbkoppling benstöd vrb
2
13057 Brickfjäder 18×6,2×0,5 DIN 2093 Dakrolit
3
13059 Låsbricka M6 DD fzb DIN 6798-D
4
80847 Vingmutter WN 314,1 25-M 6 Polyamid
5
11374 Skruv M6x30 M6S 8,8 fzb DIN 931
6
25378 Vadplatta benstöd vrb
Parts list angle adjustable hanger (legrest) Art. Nr 25567-1/25567-2
1
80731 Quick-release
2
13057 Spring washer 18×6,2×0,5
3
13059 Lock Washer M6 DD fzb DIN 6798-D
4
80847 Wing nut WN 314,1 25-M6 polyamid
5
11374 Screw M6x30 M6S 8,8 fzb DIN 931
6
25378 Calf support legrest elevating
Artikelliste winkelverstellbare Beinstütze Art. Nr 25567-1/25567-2
1
80731 Schnellkupplung
2
13057 Federring 18×6,2×0,5
3
13059 Verschlusscheibe M6 DD fzb DIN 6798-D
4
80847 Flügelmutter WN 314,1 25-M6 polyamid
5
11374 Schraube M6x30 M6S 8,8 fzb DIN 931
6
25378 Wadenplatte
Etac - A world-leading developer of assistive devices
