React Health Luna G3 Sleep Therapy Device
Product Information
The Apria Sleep Therapy, formerly known as 3B Medical, Inc., is
a CPAP (Continuous Positive Airway Pressure) and Bilevel therapy
device. It is designed to deliver a continuous flow of pressurized
air to help individuals with sleep apnea breathe more easily during
sleep. The device comes with various features such as a water
chamber for humidification, air outlet for connecting tubing, and a
start/stop button for easy operation. Additionally, the device may
include a wireless modem for transmitting data.
Product Usage Instructions
- Place the device on a firm flat surface.
- Connect the power cord: Insert the plug of the power adapter
into the DC inlet on the back of the device. Connect the other end
of the power cord into the power outlet. - Connect the end of the tubing to the air outlet of the device.
If using heated tubing, connect the heated tubing joint to the air
outlet of the device and insert the power plug into the heated
tubing port on the back of the device. - Press down the water chamber, remove it, and open the water
chamber cap. Fill the water chamber with approximately 360 ml of
water. Close the cap after filling and return it to the
device. - If you received an SD card, insert it into the SD card slot
(Note: Newer devices may not require an SD card). - Connect the device to a power outlet and press the Start/Stop
button to start delivering air. - Fit your mask according to the fitting instructions provided by
the manufacturer. If you received a mask with multiple cushions,
try different sizes if necessary. - Attach the tubing to your mask.
- Put on your mask.
- Attach the tubing to the PAP machine.
- Lie down and take four deep breaths. The machine should start
automatically. If not, press the Start Therapy/Standby button and
begin taking slow breaths through your nose. - Check for air leaks. Small leaks are acceptable, but consult
your user guide if large leaks occur. - Your setup is complete. You are now ready to begin your PAP
therapy!
Note: If you have a BPAP device, refer to the user guide for
specific instructions on connecting the Power Cord Locker. If using
prescribed oxygen, consult page 11 in your Apria Sleep Therapy User
Guide for attaching the tubing.
For more detailed information and further instructions, please
refer to your Apria Sleep Therapy User Guide or visit
Apria.com/Sleep.
Your Apria Sleep Therapy
Quick Start Guide
React Health Luna® G3
Formerly known as 3B Medical, Inc.
CPAP and Bilevel
Get Started
Reference your Apria Sleep Therapy User Guide or go to Apria.com/Sleep for more details.
1
Place the device on a firm flat surface.
See User Guide page 4
4
Press down the water chamber, and then remove it. Open the water chamber cap and fill the water
chamber with approximately 360 ml of water.
See User Guide page 5
2
Connect the Power Cord: Insert the plug
DC
of the power adapter
Inlet
into the DC inlet on
the back of the device.
Connect the power cord to the power
Power Adapter
adapter. Plug the other
Power Cord
end of the power cord
into the power outlet.
NOTE: If you have a BPAP device see User Guide page 4 to connect the Power Cord Locker.
5
Close the cap after the water is filled and return it to the device.
See User Guide page 6
3
Connect the end of the tubing to the air outlet of the device.
Air
If using heated tubing,
Outlet
connect the heated tubing
joint to the air outlet of the device, and then insert the
Tubing
power plug into the heated tubing port on the back of
Air Outlet
the device.
Heated Tubing
Connect the other end of the tubing to the mask according to the user manual for the mask.
Heated Tubing Joint
Heated Tubing
Power Plug
See User Guide page 5
6
If you received an SD card, insert it into the SD card slot.
Note: Newer devices
SD Card Slot
do not need an SD card. SD Card
See User Guide page 6
7
Connect the device to a power outlet, press the
Start/Stop button
and the device will start
delivering air.
See User Guide page 6
Note about WiFi: Your device has a wireless modem and will transmit without connecting. Unless you purchased a wireless modem separately, you do not need to connect to WiFi.
8 Fit your mask. If your doctor prescribed a
specific mask and size, follow the fitting instructions provided by the manufacturer. If you received a mask with multiple cushions, follow these instructions:
There is a mask cushion currently attached to the frame of your mask. This size fits most patients. Once you begin therapy, if your mask is leaking or feels uncomfortable, try removing the existing cushion and replacing it with a different size cushion. If you are between sizes, it is best to use the larger cushion. Use the Fitting Template (for nasal mask and full face mask) and/or the manufacturer’s instructions included with your mask for help.
See User Guide page 7
11 Attach the tubing to your mask.
(If using prescribed oxygen, consult page 11 in your Apria Sleep Therapy User Guide.) See User Guide page 11
12 Lie down and take four deep breaths.
The machine should start automatically. If you do not hear the machine start, press the Start Therapy/Standby button. Relax and begin to take slow breaths through your nose. See User Guide page 13
Nasal Mask
Nasal Pillow Mask
Full Face Mask
13 Check for air leaks.
Small leaks are acceptable. If large leaks occur, consult your Apria Sleep Therapy User Guide.
See User Guide pages 1314
9 Put on your mask.
See User Guide pages 810
14 Your setup is complete. You are now ready to
begin your PAP therapy! See User Guide page 15
10
Attach the tubing to the PAP machine.
See User Guide page 11
15
Make sure to follow the cleaning and maintenance instructions provided and review
the recommended supply replacement schedule.
See User Guide pages 2021
©2023 Apria Healthcare Group LLC
If you have any questions or need help setting up your device and getting started, please call us or visit Apria.com/Sleep.
877.265.2426
Monday – Friday: 8 a.m. – 10 p.m. ET Saturday: 11 a.m. – 7:30 p.m. ET
SLP-4389 Rev. 07/23_v9
Apria Sleep Care
