Jensen Ms6007wr 6.5-inch Coaxial Marine Speakers User Manual

Jensen MS6007WR 6.5-Inch Coaxial Marine Speakers

FEATURES

• Max power handling: 60 watts
• Weatherproof
• Sensitivity: 91dB
• Frequency: 79Hz-20kHz
• Nominal impedance: 4 Ohms
• Polypropylene cloth woofer cone: 6.5″
• Tweeter type: Dome
• Tweeter material: Titanium
• Suspension/surround: Rubber
• Voice coil size: 1″
• Magnet: 9.8 oz.
• Mounting hole diameter: 5″
• Mounting depth: 2.3″
• One-piece molded chassis with integrated drip-edge
• Corrosion resistant finishes/materials (ASTM B117)
• UV resistant finishes/materials (ASTM D4329)

DIMENSION

SPECIFICATION

General Specification

INTRODUCTION

Speakers that live in a marine environment have to be tough.  Over time, sun and salt water can do serious damage to standard speakers, but these Jensen MS6007 Series 6.5″ marine speakers boast an IPX7 all-weather rating for serious reliability.

TECHNICAL SPECIFICATIONS

• Sensitivity – 91dB
• Frequency response – 75Hz – 20kHz
• Magnet – 9.8oz
• Max Power – 60W
• 30 Watts RMS
• Cut-out Dimensions – 5″
• Mounting Depth – 2-1/3″

WHAT’S IN THE BOX

• Two (2) – 2 way speakers
• Mounting hardware

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PRODUCT DESCRIPTION

6-1/2″ coaxial white marine speaker, Mfg.# MS6007WR, 60 Watt, 55hz-20khz freq. Response, 10oz. Magnet, 7.2″ grill diameter, 5″ cutout, 2.4″ depth. Sold individually.

WARRANTY & SUPPORT

If you’d like a copy of the manufacturer’s warranty for a product found on Amazon.com, you can contact the manufacturer directly or visit their website for more information. Manufacturer’s warranties may not apply in all cases, depending on factors like the use of the product, where the product was purchased, or who you purchased the product from. Please review the warranty carefully, and contact the manufacturer if you have any questions.

FAQs

Maritime Jensen MS6007WR speakers are they amplified?

Marine stereos frequently have amplification, some of which are quite powerful. Without an external amplifier, good sound can undoubtedly be produced. The majority of people should test their stereo without an amplifier first as one can typically be added afterwards.

What are the functions of Jensen MS6007WR maritime speakers?

Marine speakers are the ones that are most appropriate for use near water. They are typically stronger as well as water-resistant. Marine speakers are constructed to endure the various exposures to moisture, environment, and weather.

Jensen MS6007WR maritime speakers can they go wet?

Marine Rated or Marine Grade items can resist marine environments. Marine-grade components may be exposed to wind, rain, and sunlight (although not necessarily submersion). Because they can withstand high ambient temperatures, they won’t burn if any water is splashed on them.

How are the Jensen MS6007WR maritime speakers built?

The construction of sea speakers uses robust materials to ensure their durability in the harsher marine environment. They have stainless steel components to withstand sudden temperature changes and are made of special plastic to withstand the elements.

How durable are the Jensen MS6007WR marine speakers?

Marine speakers are those made specifically for use on boats. Careful testing ensures that they will withstand the elements.

What is a Jensen MS6007WR two-way marine speaker?

A second tweeter is housed inside the woofer of two-way, or coaxial, speakers to handle the high frequencies and accurately reproduce the audio spectrum of your music. For greater depth and realism, three-way, or triaxial, speakers combine a middle driver with a separate woofer and tweeter.

Can automotive speakers from Jensen MS6007WR be used in ships?

Yes, you may equip your car with maritime speakers. Because the quality can be so much better and the music so much louder, it’s actually a lot of fun to do this. But there are a few things to think about first. The wiring on a boat is probably considerably dissimilar from the wiring in your automobile.

How bass-friendly are the Jensen MS6007WR marine speakers?

The seafaring speaker produces reasonable bass performance and has a great full-range sound response between 80 Hz and 20 kHz.

How can I make my Jensen MS6007WR marine speakers louder?

The overall audio experience is immediately enhanced by subwoofers because they are designed to generate bass. They play more intricately while also turning up the volume. Your boat speakers will be louder and more enjoyable with a subwoofer.

What is a Jensen MS6007WR maritime certified speaker?

A speaker must pass thorough maritime testing by the American Society for Testing and Materials in order to be referred to as marine certified. Here, the speakers’ endurance is evaluated using salt fog and UV rays.

What separates marine speakers from Jensen MS6007WR automobile speakers?

Compared to a vehicle speaker, a marine speaker is made to project and spread sound over a larger area. Standard automobile speakers are made to produce sound in a small, constrained automotive space, therefore they may not be able to transmit sound over a longer path.

What should the Jensen MS6007WR marine stereo feature?

A marine speaker is designed to project and disperse sound over a broader area than a vehicle speaker. Standard car speakers may not be able to transmit sound over a wider path because they are designed to transmit music in a small, constrained car space.

What sets Jensen MS6007WR maritime speakers apart from conventional speakers?

Marine speakers are the ones that are most appropriate for use near water. They are typically stronger as well as water-resistant. Marine speakers are constructed to endure the various exposures to moisture, environment, and weather.

Maritime Jensen MS6007WR speakers are they amplified?

Marine stereos frequently have amplification, some of which are quite powerful. Without an external amplifier, good sound can undoubtedly be produced. The majority of people should test their stereo without an amplifier first as one can typically be added afterwards.