PLR 50 Digital Laser Rangefinder
Product Information
This product is manufactured by Robert Bosch GmbH, Power Tools
Division. It is designed to be used for various power tool
applications. The product model number is 2 609 140 621 and the
manufacturing date is July 2011.
Product Usage Instructions
Before using the product, please read the user manual carefully.
Ensure that the product is used only for its intended purpose and
in accordance with the instructions provided in the manual. Failure
to do so may result in serious injury or damage to the product.
1. Connect the product to a power source as per the instructions
in the user manual.
2. Ensure that all safety precautions are taken before using the
product.
3. Attach the appropriate accessory to the product as per the
instructions in the user manual.
4. Turn on the power and use the product as per the instructions
in the user manual.
5. After use, turn off the power and disconnect the product from
the power source.
Please note that this product is designed for use by trained
professionals only. Do not attempt to use this product if you are
not trained or authorized to do so.
If you have any questions or concerns regarding the usage of
this product, please contact customer support or consult the user
manual for further information.
OBJ_DOKU-16739-003.fm Page 1 Friday, July 15, 2011 9:36 AM
WEU
WEU
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen Germany
www.bosch-pt.com
2 609 140 621 (2011.07) O / 129 WEU
<IE1Cm6W08, 2653-51:n0m7 LiansdeLreasnstreSarthrKlaulhanlsgsbelic2nkiecnht
PLR 50
de Originalbetriebsanleitung en Original instructions fr Notice originale es Manual original pt Manual original it Istruzioni originali nl Oorspronkelijke
gebruiksaanwijzing
da Original brugsanvisning sv Bruksanvisning i original no Original driftsinstruks fi Alkuperäiset ohjeet
el Ðñùôüôõðï ïäçãéþí ÷ñÞóçò
tr Orijinal iletme talimat
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-16741-003.fm Page 3 Monday, July 18, 2011 8:23 AM | 3
i a h
12 3 45
a bc d e ge f
9 8 76 16
10 11
15 11
14
21
13 <IE1Cm6W08, 2653-51:n0m7 LiansdeLreasnstreSarthrKlaulhanlsgsbelic2nkiecnht
12
17 18
20 19
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-16741-003.fm Page 4 Monday, July 18, 2011 8:11 AM 4 |
A
B
C
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-16741-003.fm Page 5 Monday, July 18, 2011 8:11 AM | 5
D
B
C
A
E
0,5 m 2,45 m
F
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-16741-003.fm Page 6 Monday, July 18, 2011 8:11 AM 6 |
G
22
2 607 990 031
23 25
24
2 607 001 391
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 16 Monday, July 18, 2011 10:31 AM
16 | English
Österreich Tel.: +43 (01) 7 97 22 20 10 Fax: +43 (01) 7 97 22 20 11 E-Mail: [email protected] Schweiz Tel.: +41 (044) 8 47 15 11 Fax: +41 (044) 8 47 15 51 Luxemburg Tel.: +32 (070) 22 55 65 Fax: +32 (070) 22 55 75 E-Mail: [email protected]
Entsorgung
Messwerkzeuge, Zubehör und Verpackungen sollen einer umweltgerechten Wiederverwertung zugeführt werden. Werfen Sie Messwerkzeuge und Akkus/Batterien nicht in den Hausmüll! Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2002/96/EG müssen nicht mehr gebrauchsfähige Messwerkzeuge und gemäß der europäischen Richtlinie 2006/66/EG müssen defekte oder verbrauchte Akkus/Batterien getrennt gesammelt und einer umweltgerechten Wiederverwendung zugeführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt abgegeben werden bei: Deutschland Recyclingzentrum Elektrowerkzeuge Osteroder Landstraße 3 37589 Kalefeld Schweiz Batrec AG 3752 Wimmis BE
Änderungen vorbehalten.
English
Safety Notes
Working safely with the measuring tool is possible only when the operating and safety information are read completely and the instructions contained therein are strictly followed. Never make warning labels on the measuring tool unrecognisable. SAVE THESE INSTRUCTIONS. f Caution The use of other operating or adjusting equipment or the application of other processing methods than those mentioned here, can lead to dangerous radiation exposure.
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 17 Monday, July 18, 2011 10:31 AM
English | 17 f The measuring tool is delivered with a warning label in German language
(marked with the number 13 in the representation of the measuring tool on the graphic page).
f Before putting into operation for the first time, attach the supplied sticker in your national language over the German text on the warning label.
f Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself. This measuring tool produces laser class 2 laser radiation according to IEC 60825-1. This can lead to persons being blinded.
f Do not use the laser viewing glasses as safety goggles. The laser viewing glasses are used for improved visualisation of the laser beam, but they do not protect against laser radiation.
f Do not use the laser viewing glasses as sun glasses or in traffic. The laser viewing glasses do not afford complete UV protection and reduce colour perception.
f Have the measuring tool repaired only through qualified specialists using original spare parts. This ensures that the safety of the measuring tool is maintained.
f Do not allow children to use the laser measuring tool without supervision. They could unintentionally blind other persons or themselves.
f Do not operate the measuring tool in explosive environments, such as in the presence of flammable liquids, gases or dusts. Sparks can be created in the measuring tool which may ignite the dust or fumes.
Product Description and Specifications
Intended Use
The measuring tool is intended for measuring distances, lengths, heights, clearances, and for the calculation of areas and volumes. The measuring tool is suitable for measuring indoors and outdoors.
Product Features
The numbering of the product features shown refers to the illustration of the measuring tool on the graphic page.
1 Length measurement button 2 Memory add button “M+” 3 Button for area and volume measurement 4 Memory retrieve button “M=” 5 Button for indirect length measurement 6 Tracking (continuous measurement) button 7 On/Off and memory delete button 8 Memory subtraction button “M” 9 Button for selection of the reference level 10 Display 11 Alignment aid 12 Measuring button 13 Laser warning label
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 18 Monday, July 18, 2011 10:31 AM
18 | English
14 Positioning pin 15 Latch of the positioning pin 16 Spirit level 17 Latch of battery lid 18 Battery lid 19 Laser beam outlet 20 Reception lens 21 Serial number 22 Laser viewing glasses* 23 Carrying strap 24 Laser target plate* 25 Protective pouch * The accessories illustrated or described are not included as standard delivery.
Display Elements a Variable measuring functions Length measurement Continuous measurement Area measurement Volume measurement Indirect length measurement b Battery low indicator c Temperature warning d Measured value/result e Unit of measure f Measurement reference level g Laser switched on h Individual measured value (for length measurement: result) i Measured values stored
Technical Data
Digital Laser Rangefinder Article number Measuring range Measuring accuracy (typically) Lowest indication unit Operating temperature Storage temperature Relative air humidity, max. Laser class Laser type Laser beam diameter (at 25 °C) and at 10 m distance, approx. Batteries Rechargeable batteries Battery live, approximately Individual measurements Continuous measurement Weight according to EPTA-Procedure 01/2003
PLR 50 3 603 K16 300
0.0550 mA) ±2.0 mmB) 1 mm
10 °C … +50 °CC) 20 °C … +70 °C 90 % 2 635 nm, <1 mW
6 mm 4 x 1.5 V LR03 (AAA) 4 x 1.2 V HR03 (AAA)
30 000 D) 5 hD)
0.18 kg
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 19 Monday, July 18, 2011 10:31 AM
Digital Laser Rangefinder Dimensions Degree of protection (excluding battery compartment)
English | 19
PLR 50 58 x 104 x 36 mm IP 54 (dust and splash water
protected)
A) The working range increases depending on how well the laser light is reflected from the surface of the target (scattered, not reflective) and with increased brightness of the laser point to the ambient light intensity (interior spaces, twilight). In unfavourable conditions (e. g. when measuring outdoors at intense sunlight), it may be necessary to use the target plate. B) In unfavourable conditions (e.g. at intense sunlight or an insufficiently reflecting surface),
the maximum deviation is ±10 mm per 50 m. In favourable conditions, a deviation influence of ±0.05 mm/m must be taken into account.
C) In the continuous measurement function, the maximum operating temperature is +40 °C. D) Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries. Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may vary. The measuring tool can be clearly identified with the serial number 21 on the type plate.
Assembly
Inserting/Replacing the Battery
Using alkali-manganese or rechargeable batteries is recommended for operation of the measuring tool.
Less measurements are possible when using 1.2 V rechargeable batteries than with 1.5 V batteries. To open the battery lid 18, press the latch 17 in the direction of the arrow and remove the battery lid. Insert the batteries/rechargeable batteries. When inserting, pay attention to the correct polarity according to the representation on the inside of the battery compartment.
When the battery symbol appears for the first time on the display, at least 100 measurements are still possible. When the battery symbol flashes, the batteries/rechargeable batteries must be replaced; measurements are no longer possible.
Always replace all batteries/rechargeable batteries at the same time. Do not use different brands or types of batteries/rechargeable batteries together. f Remove the batteries/rechargeable batteries from the measuring tool
when not using it for longer periods. When storing for longer periods, the batteries/rechargeable batteries can corrode and discharge themselves.
Operation
Initial Operation
f Do not leave the switched on measuring tool unattended and switch the measuring tool off after use. Other persons could be blinded by the laser beam.
f Protect the measuring tool against moisture and direct sun light. f Do not subject the measuring tool to extreme temperatures or variations
in temperature. As an example, do not leave it in vehicles for longer periods. In case of large variations in temperature, allow the measuring tool to adjust to the ambient temperature before putting it into operation. In case of extreme temperatures or variations in temperature, the accuracy of the measuring tool can be impaired. f Avoid heavy impact to or falling down of the measuring tool. After severe exterior effects to the measuring tool, it is recommended to carry out an accuracy check (see “Accuracy Check of the Measuring Tool”, page 24) each time before continuing to work.
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 20 Monday, July 18, 2011 10:31 AM
20 | English
Switching On and Off To switch on the measuring tool, briefly press the On/Off button 7 or measuring button 12. When switching on the measuring tool, the laser beam is not switched on yet. To switch off the measuring tool, press the On/Off button 7 for a few seconds.
If none of the measuring tool buttons are pressed for approx. 5 minutes, the measuring tool switches off automatically in order to extend the service life of the battery.
When a measured value has been stored, it is retained in automatic switch-off mode. When switching on the measuring tool again, “M” is indicated in the display.
Measuring Procedure After switching on, the measuring tool is in the length measurement mode. Other measuring modes can be switched to by pressing the respective function/mode button (see “Measuring Functions”, page 20).
After switching on, the rear edge of the measuring tool is preset as the reference level for the measurement. To change the reference level, see “Selecting the Reference Level”, page 20.
Upon selection of the measuring function and the reference level, all further steps are carried out by pushing the measuring button 12.
With the reference level selected, place the measuring tool against the desired measuring line (e. g. a wall). Push the measuring button 12 to switch on the laser beam. f Do not point the laser beam at persons or animals and do not look into the
laser beam yourself, not even from a large distance. Aim the laser beam at the target surface. Push the measuring button 12 again to initiate the measurement.
In the tracking function, the measurement already starts upon first actuation of the measuring button 12.
Typically, the measured value appears after 0.5 and latest after 4 seconds. The duration of the measurement depends on the distance, the light conditions and the reflection properties of the target surface. The end of the measurement is indicated by a signal tone. The laser beam is switched off automatically upon completion of the measurement.
When no measurement has taken place approx. 20 seconds after sighting, the laser beam is switched off automatically to save the batteries.
Selecting the Reference Level (see figures AC) For measuring, you can select between three different reference levels: The rear measuring-tool edge (e.g. when measuring onward from a wall), The rear positioning-pin edge 14 (e.g. when measuring from a corner), The front measuring-tool edge (e.g. when measuring onward from a table
edge). To change the reference level, press button 9 until the requested reference level is indicated on the display. Each time after switching on the measuring tool, the rear end of the measuring tool is preset as the reference level.
Measuring Functions
Length Measurement For length measurement, push button 1. The indicator for length measurement appears in the display .
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 21 Monday, July 18, 2011 10:31 AM
English | 21 Push the measuring button 12 once for sighting and once more to take the measurement. The measured value is indicated at the bottom in the display.
Area Measurement For area/surface measurements, press button 3 until the indicator for area measurement appears on the display. Afterwards, measure the length and the width, one after another, in the same manner as a length measurement. The laser beam remains switched on between both measurements.
After taking the second measurement, the area/surface is automatically calculated and displayed. The last individual measured value is indicated at the bottom in the display, while the final result is shown at the top.
Volume Measurement For volume measurements, press button 3 until the indicator for volume measurement appears on the display. Afterwards, measure the length, width and the height, one after another, in the same manner as for a length measurement. The laser beam remains switched on between all three measurements.
After taking the third measurement, the volume is automatically calculated and displayed. The last individual measured value is indicated at the bottom in the display, while the final result is shown at the top.
Indirect Length Measurement (see figure D)
The indirect length measurement is used to measure distances that cannot be measured directly because an obstacle would obstruct the laser beam or no target surface is available as a reflector. Correct results are achieved only when the laser beam and the sought distance form an exact right angle (Pythagorean Theorem).
In the illustrated example, the length B is to be determined. For this purpose, A and C must be measured. A and B must form a right angle.
For indirect length measurements, press button 5. The indicator for indirect length measurement appears on the display .
Measure the distance A as for a length measurement. Pay attention that the line segement A and the sought distance B form a right angle. Afterwards, measure the distance C. The laser beam remains switched on between both measurements.
Pay attention that the reference point of the measurement (e.g., the rear edge of the measuring tool) is at the exact same location for both measurements.
After completing the second measurement, the distance B is calculated automatically. The last individual measured value is indicated at the bottom in the display, while the final result B is indicated at the top.
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 22 Monday, July 18, 2011 10:31 AM
22 | English
Continuous Measurement (Tracking) (see figure E) For continuous measurements, the measuring tool can be moved relative to the target, whereby the measuring value is updated approx. every 0.5 seconds. In this manner, as an example, you can move a certain distance away from a wall, while the actual distance can always be read. For continuous measurements, push button 6. The indicator for continuous measurement (tracking) appears in the display .
Press the measuring button 12 to initiate the measuring procedure. Move the measuring tool until the required distance value is indicated at the bottom of the display. Pushing the measuring button 12 interrupts the continuous measurement. The current measured value is indicated in the display. Repeated pushing of the measuring button 12 starts the continuous measuring again.
Continuous measurement automatically switches off after 5 min. The last measured value remains indicated on the display. To cancel continuous measurement, you can change the measuring function by pressing button 1, 3 or 5.
Deleting Measured Values Briefly pressing button 7 deletes the last individual measuring value determined in all measuring functions. Briefly pressing the button repeatedly deletes the individual measured values in reverse order.
Memory Functions
When switching off the measuring tool, the value in the memory is retained.
Storing/Adding Measured Values Push the memory add button 2 in order to store the current measured value a length, area or volume value, depending on the current measuring function. As soon as a value has been stored, “M” is indicated in the display and the “+” behind it briefly flashes.
If a value is already stored in the memory, the new value is added to the memory contents, however, only when the measures of unit correspond.
As an example, when an area value is in the memory and the current measured value is a volume value, the addition cannot take place. “Error” briefly flashes in the display.
Subtracting Measured Values Push the memory subtraction button 8 in order to subtract the current measured value from the memory value. As soon as a value has been subtracted, “M” is indicated in the display and the “” behind it briefly flashes.
If a value is already stored in the memory, the new measured value can be subtracted only when the measures of unit correspond (see “Storing/Adding Measured Values”).
Displaying the Stored Value Push the memory retrieve button 4 in order to display the value stored in the memory. “M=” is indicated in the display. When the memory contents “M=” is indicated in the display, it can be doubled by pushing the memory add button 2 or set to zero by pushing the memory subtract button 8.
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 23 Monday, July 18, 2011 10:31 AM
English | 23
Deleting the Memory To delete the memory contents, first push the memory retrieve button 4, so that “M=” is indicated in the display. Then briefly press button 7; “M” is no longer indicated in the display.
Working Advice
General Information The reception lens 20 and the laser beam outlet 19 must not be covered when taking a measurement. The measuring tool must not be moved while taking a measurement (with the exception of the continuous measurement function). Therefore, place the measuring tool, as far as this is possible, against or on the measuring points. Measurement takes place at the centre of the laser beam, even when target surfaces are sighted at an incline.
Influence Effects on the Measuring Range The measuring range depends upon the light conditions and the reflection properties of the target surface. For improved visibility of the laser beam when working outdoors and when the sunlight is intense, use the laser viewing glasses 22 (accessory) and the laser target plate 24 (accessory), or shade off the target surface.
Influence Effects on the Measuring Result Due to physical effects, faulty measurements cannot be excluded when measuring on different surfaces. Included here are: Transparent surfaces (e.g., glass, water), Reflecting surfaces (e.g., polished metal, glass), Porous surfaces (e.g. insulation materials), Structured surfaces (e.g., roughcast, natural stone). If required, use the laser target plate 24 (accessory) on these surfaces. Also, air layers with varying temperatures or indirectly received reflections can affect the measured value.
Measuring with the Positioning Pin (see figures B and F) The positioning pin 14 is suitable for measuring out of corners (diagonal within a space) or from hard to reach areas, such as from roller-shutter rails. Slide the latch 15 of the positioning pin sideward in order to swivel out the pin. Set the corresponding reference level for measurements with the positioning pin by pushing button 9. The positioning pin 14 swivels back in again by pushing it toward the housing to the stop. The pin automatically locks in place.
Aligning with the Spirit Level The spirit level 16 allows for simple levelling of the measuring tool. This allows for easier sighting of target surfaces, especially over longer distances. In combination with the laser beam, the spirit level 16 is not suitable for levelling.
Sighting with the Alingment Aid (see figure G) With the alignment aid 11, sighting over larger distances is a lot easier. For this, look alongside the aligning aid on the top side of the measuring tool. The laser beam runs parallel to this line of sight.
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 24 Monday, July 18, 2011 10:31 AM
24 | English
Troubleshooting Causes and Corrective Measures
Cause
Corrective Measure
Temperature warning indicator (c) flashing; measurement not possible
The measuring tool is outside the oper- Wait until the measuring tool has ating temperature range from 10 °C reached the operating temperature to + 50 °C (in the function continuous measurement up to +40 °C).
Battery low indicator (b) appears
Battery voltage decreasing (measure- Replace batteries/rechargeable bat-
ment still possible)
teries
Battery low indicator (b) flashing; measurement not possible
Battery voltage too low
Replace batteries/rechargeable bat-
teries
“Error” and “” indication in display
The angle between the laser beam and Enlarge the angle between the laser
the target is too acute.
beam and the target
The target surface reflects too intense- Work with the laser target plate 24 (ac-
ly (e. g. a mirror) or insufficiently (e. g. cessory)
black fabric), or the ambient light is too
bright.
The laser beam outlet 19 or the recep- Wipe the laser beam outlet 19 and/or tion lens 20 are misted up (e.g. due to the reception lens 20 dry using a soft
a rapid temperature change).
cloth
Calculated value is greater than 99999 m/m2/m3.
Divide calculation into intermediate steps
“Error” indication flashes at in display (top)
Addition/Subtraction of measured val- Only add/subtract measured values ues with different units of measure with the same units of measure Unreliable measuring result
The target surface does not reflect cor- Cover off the target surface
rectly (e.g. water, glass).
The laser beam outlet 19 or the recep- Make sure that the laser beam outlet
tion lens 20 are covered.
19 or the reception lens 20 are unob-
structed
Measuring result not plausible
Wrong reference level set
Select reference level that corresponds to measurement
Obstruction in path of laser beam
Laser point must be completely on target surface.
The measuring tool monitors the correct function for each measurement. When a defect is determined, only the symbol shown aside flashes in the display. In this case, or when the above mentioned corrective measures cannot correct an error, have the measuring tool checked by an after-sales service agent for Bosch power tools.
Accuracy Check of the Measuring Tool
The accuracy of the measuring tool can be checked as follows:
Select a permanently unchangeable measuring section with a length of approx. 3 to 10 metres; its length must be precisely known (e.g. the width of a room or a door opening). The measuring distance must be indoors; the target surface for the measurement must be smooth and reflect well.
Measure the distance 10 times after another.
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 25 Monday, July 18, 2011 10:31 AM
English | 25
The deviation of the individual measurements from the mean value must not exceed ±3 mm (max.). Log the measurements, so that you can compare their accuracy at a later point of time.
Maintenance and Service
Maintenance and Cleaning
Store and transport the measuring tool only in the supplied protective pouch. Keep the measuring tool clean at all times. Do not immerse the measuring tool in water or other fluids. Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents. Maintain the reception lens 20 in particular, with the same care as required for eye glasses or the lens of a camera. If the measuring tool should fail despite the care taken in manufacturing and testing procedures, repair should be carried out by an authorised after-sales service centre for Bosch power tools. Do not open the measuring tool yourself. In all correspondence and spare parts orders, please always include the 10-digit article number given on the type plate of the measuring tool. In case of repairs, send in the measuring tool packed in its protective pouch 25.
After-sales Service and Customer Assistance
Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. Exploded views and information on spare parts can also be found under: www.bosch-pt.com Our customer service representatives can answer your questions concerning possible applications and adjustment of products and accessories.
Great Britain Robert Bosch Ltd. (B.S.C.) P.O. Box 98 Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ Tel. Service: +44 (0844) 736 0109 Fax: +44 (0844) 736 0146 E-Mail: [email protected]
Ireland Origo Ltd. Unit 23 Magna Drive Magna Business Park City West Dublin 24 Tel. Service: +353 (01) 4 66 67 00 Fax: +353 (01) 4 66 68 88
Bosch Power Tools
2 609 140 621 | (18.7.11)
Downloaded from www.Manualslib.com manuals search engine
OBJ_DOKU-27449-001.fm Page 26 Monday, July 18, 2011 10:31 AM
26 | English
Australia, New Zealand and Pacific Islands Robert Bosch Australia Pty. Ltd. Power Tools Locked Bag 66 Clayton South VIC 3169 Customer Contact Center Inside Australia: Phone: +61 (01300) 307 044 Fax: +61 (01300) 307 045 Inside New Zealand: Phone: +64 (0800) 543 353 Fax: +64 (0800) 428 570 Outside AU and NZ: Phone: +61 (03) 9541 5555 www.bosch.com.au
Republic of South Africa Customer service Hotline: +27 (011) 6 51 96 00
Gauteng BSC Service Centre 35 Roper Street, New Centre Johannesburg Tel.: +27 (011) 4 93 93 75 Fax: +27 (011) 4 93 01 26 E-Mail: [email protected]
KZN BSC Service Centre Unit E, Almar Centre 143 Crompton Street Pinetown Tel.: +27 (031) 7 01 21 20 Fax: +27 (031) 7 01 24 46 E-Mail: [email protected]
Western Cape BSC Service Centre Democracy Way, Prosperity Park Milnerton Tel.: +27 (021) 5 51 25 77 Fax: +27 (021) 5 51 32 23 E-Mail: [email protected]
Bosch Headquarters Midrand, Gauteng Tel.: +27 (011) 6 51 96 00 Fax: +27 (011) 6 51 98 80 E-Mail: [email protected]
Disposal
Measuring tools, accessories and packaging should be sorted for environmentalfriendly recycling.
Do not dispose of measuring tools and batteries/rechargeable batteries into household waste! Only for EC countries:
According to the European Guideline 2002/96/EC, measuring tools that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.
2 609 140 621 | (18.7.11)
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
