DC2760 Single Channel Dual Control Emitter
Product Information
Product Name: DC2760 Emitter
Version: A/02
Features: Single-channel dual control
emitter
Battery Life: >2 years
Radio Frequency: 433.92MHz
Radio Range: 200 meters outdoor, 35 meters
indoor
Product Usage Instructions
Emitter Buttons:
- A – UP button
- STOP button
- DOWN button
- LED indicator
- B – Lighting button
- Setting button (P2)
Warning:
- The emitter should not be exposed to moisture or subjected to
heavy impact, as it may affect the emitter’s lifespan. - If the emitter becomes less sensitive or the radio range
decreases, please check if the battery needs to be replaced. - Using a different type of battery is strictly prohibited to
avoid any potential risks.
Note: For detailed instructions on using the
DC2760 emitter, please refer to the complete user manual.
DC2760
Emitter Instruction
Version: A/02
Instruction Of Buttons
A UP STOP DOWN LED
B
UP
STOP
DOWN
Lighting button
Setting button
(P2)
Setting button (P2)
DC2760 Single-channel dual
control emitter
DC2760
Technical specification Battery: AAA battery×2) Working temperature: -10~50
Battery life: >2 years
Radio frequency: 433.92MHz Radio range: 200 meters outdoor, 35 meters indoor
Warning
1, Emitter couldn’t expose to moisture or be striked heavily, or else the emitter life will be affected.
2, If the emitter is not so sensitive or the radio range becomes shorter, pls check whether to change the battery.
3, It’s forbidden to use different type battery to avoid any dangerous risk.
4, Dispose of used batteries properly. FfFCC warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the CFC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
