Husqvarna 40-C80 Charging Rail
WHAT IN BOX
INSTALLATION INSTRUCTION
safety Instruction
CAUTION!
When the product is used with 8 pieces of 40-C80 battery chargers, the maximum current rating is 13.6 A when the mains voltage is 90–125 V and 6 A when the mains voltage is 207–240 V.
- Use only Husqvarna battery charger 40-C80 with the charging rail.
- Read all safety warnings and instructions for the 40-C80 battery charger before you use the charging rail.
- Do not use the power cord for other operations.
- Make sure that the wall can hold loads of minimum 30 kg.
- The screws that are included with the product can be used for wall installation of the rail. Make sure that the screws are applicable with your wall type.
- Do not use an electric screwdriver to install the battery charger to the charging rail. An electric screwdriver can cause damage to the battery charger.
- Do not move the charging rail when the batteries are connected to the battery chargers.
- Do not touch the cable connectors when they are connected to a power outlet.
- Put the cable connectors that are not in operation in the rail pocket to prevent damage.
- Do not pull the power cord.
- Do not use the power cord if it is damaged.
- Do not try to repair a damaged power cord.
- Do not use rubber feet that are delivered with the charging rail for wall installation. It can cause damage to the charging rail.
