3 IN 1 MAGNETIC WIREL.ESS CHARGER
USER MANUAL
Note: In order to charge 3 smart devices atthe same time, please use 9V/2A adapter (QC 2.0 or QC 3.0)and quick charge cable. Otherwise, you may not charge smart phones or 3 smart devices at the same time, also it may damage the wireless charger.
Product Introduction
The 3 in 1Wireless Charger is multifunction charging station, you can charge three smart devices(1Qi smart phone, 1 iWatch and 1 earbuds) on our product atthe same time It is compatible with Qi enable smartphone, iWatch, airpods and most ofAndroid earbudsit is unique design with elegant appeararice, and perfect to use at office or at home.
It is veryconvenientto charge your smart devices on our product especially for Apple user. There is protection of over-charge and FODfunction, you can enjoy your charging experience safely.
PRODUCT APPEARANCE
LED LIGHT INSTRUCTIONS
| LED status | Standby mode | Phone Charging | FOD |
| LED light |  |  |  |
| LED light | Green light on | Blue light breathing | Blue and green flashing |
WIRELESS CHARGING OF MULTIPLE DEVICES
COMPATIBLE SMART DEVICES
- iPnone12/13 series
iPhone 12/13 Pro Max
iPhone 12/13 Mini
iPhone 12/13 Pro
iPhone 12/13 - Wireless headset
Airpods Pro
Airpods 2/3 series
The others Qi enable earbuds
PRODUCT SPECIFICATION
| Input: SV/2A | Transmission distance: &6mm |
| Qutput(Phone): 15v4/10W/7.5w/SW | Conversion rate: #73% |
| Output(Earbuds): 3W | Product size: 154°100°143mm |
| Output(Watch): 2.5w | Frequency. 105-205 KHZ |
| Input Port: Type-C | Color:Black and White |
PACKING LIST
Multi function wireless charging < 1, Type-C quick charging cable X1, User manuabxt.
WARNING:
- Avoid using the product at places that are wet, humid or have high temperature.
- Avoid dropping the product from high places.
- Do not disassemble the product by yourself. Please contact us if necessary.
- Do not clean the product unless the unit is powered off.
- It is recommended to use 18W or above adapter to charge 3 smart devices at the same time..
FCC Statement
This device complies with part 15 FCC Rules. Operation is Subject To the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not explicitly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC radiation exposure
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device, a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.
