Conrad Pg-kits200w-18vs Folding Solar Charger Instruction Manual

PG-KITS200W-18VS Folding Solar Charger

Instruction Manual Of Folding Solar Charger

Technical parameter：

1. How to use:

Unfold the Folding Solar Charger and open the bracket to adjust the angle so that the front of the check the connection status of each component, each wire and plug. solar panel is completely facing the direction of the sun

Connect the line correctly according to the following diagram

2. Matters needing attention

★ Please read the user guide before using this product.

★ Do not bend, step on, or disassemble the solar folding panel. 

★ Do not place the solar folding panel in shading places such as trees and buildings. 

★ Do not soak the solar folding panel in water or any other liquid. 

★ Do not use or store solar folding panels near open flames or flammable materials. 

★ Do not scratch the solar folding panel with sharp objects. 

★Do not put corrosive substances on the solar folding panel. 

★When using the solar folding panel, the circuit must be correctly connected to the equipment and check the connection status of each component, each wire and plug.

★ Due to the material characteristics of the product, it is strictly forbidden to drop it, otherwise it will cause the internal damage of the solar panel and make the product unusable.

3. Common problem

How to clean the surface of this product?
Use a soft brush or damp cloth to clean the dust on the surface of the product.
If there is bird droppings or other sticky objects on the surface of the product, it should be cleaned up immediately. To ensure the service life of the product, please keep the product dry daily.

What should I do if there is no output from the solar folding panel?
Please put the solar foldable panel in a sunny environment, and check the connection status of each component, each wire and plug. You can try to replace the data cable or charging device to check whether the solar foldable panel is working.