Icofru Solar Pendant Lights Indoor Outdoor With Remote Control User Guide (+ PDF)

Home » Blog » Icofru Solar Pendant Lights Indoor Outdoor With Remote Control User Guide

Contents hide

Please read the user guide carefully before use it

Please test the solar light before installing

There are 3 modes to adjust. The light will work according to the mode you set every day.

“ON” Mode: Press the “ON” button twice in the daylight or at night, the light will turn on.
“AUTO” Mode: When the light is “ON” mode, then press the “AUTO” button, the light will turn on at night and turn off in the daylight automatically.
Fixed Time Mode: You can also press “2H” “4H” “6H” to set the time of light working at night. Press the “OFF” button to turn off the light. Press the “+” “-” to adjust the brightness of the light

Drill holes and fix the solar panel. Please choose a place where there is direct sunlight for 5 hours a day to install solar panel, the recommended installation height is 4-5m.
Connect the light with the solar panel.
Hang the light using wire or rope. The solar pendant light is for on the garage, backyard, or camping

Notes:

After turning on the light, if you press “OFF” at once, the light wouldn’t turn off. You have to wait for 10-20 seconds, then press “OFF”, the light will turn off.
When you using the remote, you have to target the middle of the lamp.
Please charge it 6 hours at least under sunlight before using it.
The charging time and the lighting time of the solar light will change with sunlight intensity, geographical location, weather conditions, seasons, and other conditions.
It is recommended to clean the surface of the solar panel every two months.
It is recommended to use 2H, 4H lighting mode on rainy days or in the second half of the year

After-Service
If you have any problems when using it, please contact us. We will reply within 24 hours as soon as possible.

Email: [email protected]