Lyt Self Cleaning Water Purifier User Guide

LYT Self Cleaning Water Purifier

Product featured

• Destroys 99.9% of e.coli in minutes from your drinking water
• Self-cleaning activates every hour to keep your bottle odor-free

Quick Start

• Step 1: ChargeCharge the LYT bottle cap fully before use. Press activation button to indicates battery life. Green light indicates 40% – 100%Orange light indicates 11% – 39%
  Red light indicates 1% – 10%
• Step 2: Activate Self-Cleaning
  Press and hold the power button for 5 seconds to activate self-cleaning mode. LED flashes three times to indicate self-cleaning mode is active. Once self-cleaning is activated, cap will turn-on automatically every hour for a few seconds to keep your bottle odor-free.
• Step 3: Fill
  Fill your bottle with tap water. Note: not suitable with water from stream or a river.
• Step 4: Cap
  Screw on the LYT bottle cap and tighten for proper seal.
• Step 5: Purify
  Gently press button on top of cap 2 times to purify the water. This destroys 99.9% of e.coli in 3 minutes from your drinking water. Product not tested on viruses and pathogen

Safety precautions

• Do not irradiate eyes with UV-C light
• Not intended or not suitable for use by children
• Do not activate the cap without installing on the bottle
• Use only with tap water or transparent water source free of debris.
• Not suitable for water from river or stream

FCC Statement

Manufactured for UBO-Technologies, LLC at EPA Est. No. 98267-FL-1
Directions to use: This products must be used according to the instructions listed on the manual. Manual is on the back side of this label.
Caution: This product is not suitable or intended for use by children. This product contains Lithium-ion battery and uses Ultraviolet radiation. See Manual for complete directions of use and safety warnings.

References

• WAATR Official Site -Self-Cleaning Purification Water Bottles & Caps